MODII Assault vest FSBE
|
|
MODII Assault vest FSBE in Coyote Brown
Releasable Design.
Includes
1x Triple Mag Holder (holds 6 mags)
1x Admin pouch and torch holder.
1x Utility pouch
Fits up to 5ft 8 and Medium/Large chest. |
|
|
|
Viper Assault Vest platform Green or black
|
|
Viper Assault Vest platform Green or black
Largest of the base carriers. Can be loaded front & back. Front zip & quick-release buckles, 2 zipped internal pockets, 1 with holster, water bladder holder. Internal belt included.
One size fits all
Available in , Olive Green, Black
PLEASE STATE COLOUR WHEN ORDERING |
|
|
|
VIPER BELT PLATFORM black or green
|
|
VIPER BELT PLATFORM black or green
Padded waist belt with quick-release buckle, 2 rows of webbing, size 28-48
Black or green |
|
|
|
Viper Hong Kong Special Police Vest RRP £49.95 lots of colours!
|
|
Padded Neck, Back Guard, and Deadmans Handle.
With it being a Tact vest it also has Multiple pockets, which consist of some of the following:
4 x Front Magazine Pockets, 8 x Shotgun Shell Holders, Front Medi Pack Holder, Rear Radio Pouch, Gun Straps and many more.
It has Fully adjustable sides, which are reinforced with suede. |
|
|
|
Viper LA Special Forces Assault vest in Digital DPM
|
|
VIPER LA SPECIAL FORCES VEST
DIGITAL DPM , 600D CORDURA , 6 ADJUSTABLE MAG POUCHES,3 UTILITY POUCHES,9 SHELL LOOPS,BELT INCLUDED.
ONE SIZE FITS ALL. |
|
|
|
Viper LA special forces vest RRP £38.50 Many colours!
|
|
600D Cordura
6 adjustable mag pouches,
3 utility pouches,
9 shell loops,
belt included
Fixing's on back |
|
|
|
Viper south African assault vest RRP £38 Many Colours
|
|
Viper south African assault vest RRP £29.95 in Tan, DPM, Digital DPM, OD green, or black
• Made from 600D Cordura
• Adjustable Padded Quick-Release Straps
• 4 Magazine Pouches
• Large Rear Storage Compartment
• Several Assorted Size Utility Pouches
• One Size Fits All
|
|
|
|
Viper special ops vest in green
|
|
VIPER SPECIAL OPS VEST in green
•FULLY ADJUSTABLE
•Webbing front, rear & side
•compatible with Viper modular System, giving you a very large base platform to attach whatever pouches the situation requires
•All adjustments become covert with the use of Velcro covers
•Detachable protection pads on shoulder
•4 covert M16 mag pouches on inside
•Removeable padding for extra protection
One size fits all |
|
|
|
Web-tex Classic Assault Vest
|
|
Web-tex Classic Assault Vest
Web-tex Classic Assault Vest DPM
-Lightweight mesh back
-With fully adjustable straps on the shoulders and front
-Front zip access to internal holster and pocket
-Two triple ammo pouches
-Six other external pouches.
-Now featuring all fittings to connect either one or two PLCE side pouches or Web-tex water bladder holder.
Made from 1000 denier waterproof Cordura. |
|
|
|
Web-tex Combat vest RRP £110 new Version
|
|
This is the latest assault/combat vest from Web-Tex, made from 1000D IRR Cordura Nylon and packed with all features of the Arktis Jungle Battle Vest.
The advantage of the Combat Vest is that both rear pouches are accessible by the wearer. The pouches shorter, more like the Real Deal, and have a much longer cover. The vest is wonderfully adjustable with Velcro-assisted front shoulder adjusters, three rear 'kidney' adjusters and vertical adjusters on the back. As on the S2000 Assault Vest, each shoulder also has an adjustment strap.
'IRR' is achieved by colouring the fabric with vegetable dyes instead of mineral dyes that doesn't ''glow'' in Night Vision.
Key Features:
Double-layer Olive Drab (OD) mesh construction
Zip and/or clipped front
Four triple magazine pouches (two per side) with both Fastex and Velcro closing
Twin kidney pouches at rear, Velcro/Fastex fastening
Twin Fast Field Dressing (FFD, small pouches) on the left front
Maglite pouch on the right front
Multi-tool pouch
Webbing loop on left shoulder for (e.g.) radio or microphone
Twin 'map pouches' (open areas covering the entire inner front of the vest)
Large internal pocket with horizontal holster
Rear hydration pouch (water bladder holder)
Includes lightweight Fastex duty belt, 1.5L hydration bladder, bite valve/tube, and neoprene cover
Double mesh on shoulders
Velcro adjustment with double straps
PLCE-style belt loops
Clips to take one or two 'rocket pocket' day-sacks
|
|
|
|
Web-tex Combat vest RRP £95 new Version (Desert) new type
|
|
This is the latest assault/combat vest from Web-Tex, made from 1000D IRR Cordura Nylon and packed with all features of the Arktis Jungle Battle Vest.
The advantage of the Combat Vest is that both rear pouches are accessible by the wearer. The pouches shorter, more like the Real Deal, and have a much longer cover. The vest is wonderfully adjustable with Velcro-assisted front shoulder adjusters, three rear 'kidney' adjusters and vertical adjusters on the back. As on the S2000 Assault Vest, each shoulder also has an adjustment strap.
'IRR' is achieved by colouring the fabric with vegetable dyes instead of mineral dyes that doesn't ''glow'' in Night Vision.
Key Features:
Double-layer Olive Drab (OD) mesh construction
Zip and/or clipped front
Four triple magazine pouches (two per side) with both Fastex and Velcro closing
Twin kidney pouches at rear, Velcro/Fastex fastening
Twin Fast Field Dressing (FFD, small pouches) on the left front
Maglite pouch on the right front
Multi-tool pouch
Webbing loop on left shoulder for (e.g.) radio or microphone
Twin 'map pouches' (open areas covering the entire inner front of the vest)
Large internal pocket with horizontal holster
Rear hydration pouch (water bladder holder)
Includes lightweight Fastex duty belt, 1.5L hydration bladder, bite valve/tube, and neoprene cover
Double mesh on shoulders
Velcro adjustment with double straps
PLCE-style belt loops
Clips to take one or two 'rocket pocket' day-sacks
|
|
|
|
WEB-TEX MODULAR CHEST RIG rrp £49.99
|
|
WEB-TEX MODULAR CHEST RIG rrp £49.99
MLCE - Modular Load Carrying Equipment. Using either the Web-tex Modular System Vest, Chest Rig or Grab Bag as a base, you can build a set-up tailored specifically to your operation by adding from our range of mag, utility & accessory pouches
Use the range of high quality mag, utility & accessory pouches to set up a vest to suit your operational environment.
Features:
I.R.R Treated Material
Fully adjustable side & shoulder straps.
Pouches can be fitted to the front & shoulders
Made from 1000D Cordura
One size fits all. Available in British DPM only. |
|
|
|
WEB-TEX Modular Vest DPM RRP £66
|
|
WEB-TEX Modular Vest DPM RRP £66
MLCE - Modular Load Carrying Equipment. Using either the Web-tex Modular System Vest, Chest Rig or Grab Bag as a base, you can build a set-up tailored specifically to your operation by adding from our range of mag, utility & accessory pouches
Features:
I.R.R Treated Material
Integral Water bladder Pouch v
Two Large Internal pouches (one with holster)
Internal Waist Belt
Three Buckle Closures
Fully adjustable side & shoulder straps.
Pouches can be fitted to the front, rear & shoulders
Made from 1000D Cordura
Use the range of high quality mag, utility & accessory pouches to set up a vest to suit your operational environment available in our store.
One size fits all. Available in British DPM only |
|
|
|
Web-tex Tactical Vest Black
|
|
Web-tex Tactical Vest Black
-Professional vest made from 1000D Cordura
-6 large adjustable mag pouches
-3 utility pouches
-2 internal pockets
-Side lace adjustment
-One size fits all
** Black security belt not included but available separately |
|
|
|
WEBTEX PLCE SET
|
|
Consists of:
1 x PLCE Belt,
1 x Standard Yoke,
1 x Standard Utility Pouch,
1 x Waterbottle Pouch,
2 x Double Ammo Pouch |
|
|
|
WebTex cross draw vest in black RRP £65
|
|
Professional vest made from 1000D cordura. Adjustable pouches accommodate most magazines, flashlights & other utility items. Also includes sniper shoulder & two internal pockets. Side lace adjustment. One size fits all
Belt not included |
|
|
|
VIPER BELT MOUNTED MAG POUCH
|
|
VIPER BELT MOUNTED MAG POUCH
Made from 600D polyester
•Ideal for pistol mags
•Two Velcro belt attachments on rear
•Quick release buckle opening with Velcro adjustment
Available in Black |
|
|
|
Viper double grenade pouch in green on black
|
|
Viper double grenade pouch in green or black
Viper modular Double Grenade Pouch O/G & Black. |
|
|
|
Viper double pistol mag pouch in green on black
|
|
Viper double pistol mag pouch in green or black
VIPER DOUBLE PISTOL MAG POUCH,TAKES 2 STANDARD PISTOL MAGS,SEPERATEPOCKETS,ADJUSTABLE VELCRO CLOSURES,
FULLY MODULAR,MADE FROM 600D CORDURA, MADE IN GREEN AND BLACK. |
|
|
|
Viper GPS / Radio pouch in green or black
|
|
Viper GPS / Radio pouch in green or black
Versatile pouch with elastic tensioners, adjustable retaining straps, Velcro & press-stud fastening, 2 threads with press-studs on reverse |
|
|
|
Viper grenade pouch green or black
|
|
Viper grenade pouch green or black
Velcro fastening, quick-release pull tab, 2 threads with press-studs on reverse |
|
|
|
Viper medium utility pouch black or green
|
|
Viper medium utility pouch black or green
Approx 22x14x8cm. Versatile pouch with zipped top, closure, full webbing on front for extra add-ons, 4 threads with press-studs on reverse. |
|
|
|
Viper Modular D-Rings
|
|
Viper Modular D-Rings.
Modular D-Rings Can be attached to the modular system to solve any carrying needs,
Contains 2 rings,
600D Cordura |
|
|
|
viper mp5 molle mag pouch in green or black
|
|
Viper mp5 mag pouch molle fitting in green or black
TRIPLE MAG POUCH WITH INDIVIDUAL VELCRO CLOSURES.THREE THREADS WITH PRESS-STUDS ON THE REVERSE. |
|
|
|
Viper pistol Mag pouch green or black
|
|
Press-stud opening at front & fixing at rear 600D Polyester 17x8x4cm |
|
|
|
Viper quick release double mag pouch m4 / sa80 /m16 Green or bla
|
|
Viper quick release double mag pouch m4 / sa80 /m16 Green or black
Viper Quick-Release Double Mag Pouch O/G or Black.
Fits m4 / m16 / 15 / sa80 / scar magazines + more |
|
|
|
Viper single Quick Release mag pouch for m4 / sa80 magazines gre
|
|
Viper single Quick Release mag pouch for m4 / m16 / sa80 magazines green or black
Viper Quick-Release Mag Pouch O/G or Black. |
|
|
|
Web-Tex Modular Double M16 Mag Pouch RRP £12.50
|
|
Web-Tex Modular Double M16 Mag Pouch RRP £12.50
MLCE - Modular Load Carrying Equipment. Using either the Web-tex Modular System Vest, Chest Rig or Grab Bag as a base, you can build a set-up tailored specifically to your operation by adding from our range of mag, utility & accessory pouches
Web-Tex Modular Double M16 Mag Pouch.
DPM Camo,
IRR Treated,
Measures 20x10x7cm |
|
|
|
Web-Tex Modular GPS/Radio Pouch RRP £10.50
|
|
MLCE - Modular Load Carrying Equipment. Using either the Web-tex Modular System Vest, Chest Rig or Grab Bag as a base, you can build a set-up tailored specifically to your operation by adding from our range of mag, utility & accessory pouches
Web-Tex Modular GPS/Radio Pouch.
DPM Camo,
IRR Treated,
Measures; 16x8x4cm |
|
|
|
Web-Tex Modular Grenade Pouch - RRP £7.50
|
|
Web-Tex Modular Grenade Pouch - RRP £7.50
MLCE - Modular Load Carrying Equipment. Using either the Web-tex Modular System Vest, Chest Rig or Grab Bag as a base, you can build a set-up tailored specifically to your operation by adding from our range of mag, utility & accessory pouches
Web-Tex Modular Grenade Pouch.
DPM Camo,
IRR Treated,
Size; 15-19x7x5cm |
|
|
|
Web-Tex Modular Knife Pouch
|
|
Web-Tex Modular Knife Pouch
MLCE - Modular Load Carrying Equipment. Using either the Web-tex Modular System Vest, Chest Rig or Grab Bag as a base, you can build a set-up tailored specifically to your operation by adding from our range of mag, utility & accessory pouches
Web-Tex Modular Knife Pouch.
DPM Camo,
IRR Treated,
size 12x3.5cm |
|
|
|
Web-Tex Modular Large Belt Pouch - RRP £6.50
|
|
Web-Tex Modular Large Belt Pouch - RRP £6.50
MLCE - Modular Load Carrying Equipment. Using either the Web-tex Modular System Vest, Chest Rig or Grab Bag as a base, you can build a set-up tailored specifically to your operation by adding from our range of mag, utility & accessory pouches
Web-Tex Modular Large Belt Pouch.
DPM Camo,
IRR Treated,
size 16-18x7x3cm |
|
|
|
Web-Tex Modular Medium Utility Pouch RRP £12.50
|
|
Web-Tex Modular Medium Utility Pouch RRP £12.50
MLCE - Modular Load Carrying Equipment. Using either the Web-tex Modular System Vest, Chest Rig or Grab Bag as a base, you can build a set-up tailored specifically to your operation by adding from our range of mag, utility & accessory pouches
Web-Tex Modular Medium Utility Pouch.
DPM Camo,
IRR Treated,
Size; 22x14x8cm |
|
|
|
WEB-TEX MODULAR SA80 POUCH RRP £19.99
|
|
WEB-TEX MODULAR SA80 POUCH RRP £19.99
MLCE - Modular Load Carrying Equipment. Using either the Web-tex Modular System Vest, Chest Rig or Grab Bag as a base, you can build a set-up tailored specifically to your operation by adding from our range of mag, utility & accessory pouches
21 x 18 x 8cm
As well as the quick release buckle, there are also velcro pads for speed. These can be tucked away for silent operation.
This mag doesn't have a top yoke attachment for PLCE web yokes.
Features:
I.R.R. treated material
2 Ammo pouches which can each hold 3 SA80 mags.
Can hold up to 6 x Rifle / 6 x M16/M4 Mags
Made from 1000D Cordura
|
|
|
|
Web-Tex Modular Single Mag Pouch RRP 6.50
|
|
Web-Tex Modular Single Mag Pouch RRP 6.50
MLCE - Modular Load Carrying Equipment. Using either the Web-tex Modular System Vest, Chest Rig or Grab Bag as a base, you can build a set-up tailored specifically to your operation by adding from our range of mag, utility & accessory pouches
Web-Tex Modular Single Mag Pouch.
DPM Camo,
IRR Treated,
Size; 14-17x5x2cm |
|
|
|
Web-Tex Modular Trauma Pouch RRP £22
|
|
MLCE - Modular Load Carrying Equipment. Using either the Web-tex Modular System Vest, Chest Rig or Grab Bag as a base, you can build a set-up tailored specifically to your operation by adding from our range of mag, utility & accessory pouches
Web-Tex Modular Trauma Pouch.
DPM Camo,
IRR Treated,
Size; 23x11x11cm |
|
|
|
Web-Tex Single Utility pouch RRP £14.50
|
|
MLCE - Modular Load Carrying Equipment. Using either the Web-tex Modular System Vest, Chest Rig or Grab Bag as a base, you can build a set-up tailored specifically to your operation by adding from our range of mag, utility & accessory pouches
Web-Tex Single Utility Pouch is designed for use with British Army webbing. You never get issued with enough utility or water bottle pouches so this will ensure you have enough to correctly set up your webbing. Its main components being it's tough construction and single handed quick release buckles a Versatile large pouch that mounts on to a belt.
Features:
Quickrelease buckle opening,
Size 26x16x10cm,
DPM Camo
made from 1000 denier waterproof Cordura |
|
|
|
Web-Tex Warrior Drink and Cook Set with Camo Pouch
|
|
Web-Tex Warrior Drink and Cook Set with Camo Pouch
Product Information:
4-piece set consisting of
•Burner
•Cup
•58-patt water bottle
all contained in a DPM water bottle pouch
Burner & cup made from quality 304 stainless steel
Non-stick cooking surface and can be used with solid or gas fuels |
|
|
|
Web-Tex Water bottle pouch RRP £15
|
|
Web-Tex Water bottle pouch RRP £15
MLCE - Modular Load Carrying Equipment. Using either the Web-tex Modular System Vest, Chest Rig or Grab Bag as a base, you can build a set-up tailored specifically to your operation by adding from our range of mag, utility & accessory pouches
Features:
Made from 1000 denier waterproof Cordura,
Quickrelease buckle opening,
22x16x10cm,
Colour- DPM Camo |
|
|
|
Beer Test meter Morale patch 1"x2"
|
|
Beer test meter 1"x2" Patch with hook Velcro backing. In Desert
Picture isn't of the Desert patch |
|
|
|
Bull sh!t Morale patch 1"x2"
|
|
Bull Sh!t 1"x2" Patch with hook Velcro backing. In Desert/Tan |
|
|
|
COMMON SENSE METER Morale patch 1"x2"
|
|
COMMON SENSE METER 1"x2" Patch with hook Velcro backing. In Desert/Tan |
|
|
|
Dark side Morale patch 1"x2"
|
|
1x Dark Side 1"x2" Patch with hook Velcro backing. In Desert/ Tan
Picture not of actual patch |
|
|
|
Evil Smiley Morale patch 1"x2"
|
|
1x Evil Smiley 1"x2" Patch with hook Velcro backing. In Desert/Tan |
|
|
|
Fear Meter Morale patch 1"x2"
|
|
1x Fear meter 1"x2" Patch with hook Velcro backing. In Dresert/Tan |
|
|
|
Fubar Morale patch 1"x2"
|
|
1x Fubar "F*&ked Up Beyond All Reconition" 1"x2" Patch with hook Velcro backing. In Desert |
|
|
|
Gear meter Morale patch 1"x2"
|
|
1x Gear meter 1"x2" Patch with hook Velcro backing. In Desert |
|
|
|
Hooah meter Morale patch 1"x2"
|
|
1x Hooah meter 1"x2" Patch with hook Velcro backing. In Desert/Tan |
|
|
|
Medical Red Cross ID Patch
|
|
Medical Red Cross ID patch. Great for quick identification of aid bags, blow out kits, Individual First Aid Kits, Medics themselves. 1.25 x 1.25 inches, Velcro backed In Desert/Tan |
|
|
|
T.W.A.T Morale patch 1"x2"
|
|
T.W.A.T morale patch (The War Against Terrorism) 1"x2" Patch with hook Velcro backing. In Desert/Tan |
|
|
|
Trunky Monkey Morale patch 1"x2"
|
|
Trunk Monkey 1"x2" Patch with hook Velcro backing. In Desert
Picture not of Desert patch |
|
|
|
U.S. forward flag patch 1X2 inch
|
|
U.S. forward flag Patch with hook Velcro backing. In Desert/Tan |
|
|
|
XXXXX METER Morale patch 1"x2"
|
|
1x XXXXX Meter 1"x2" Patch with hook Velcro backing. In Desert |
|
|
|
1x Subdued Union Pack patch
|
|
1x patch
MALE VELCRO FIXING ON REVERSE,90 X 50 MM |
|
|
|
Beer test meter Morale patch 1"x2"
|
|
Beer test meter 1"x2" Patch with hook Velcro backing. In OD green |
|
|
|
COMMON SENSE METER Morale patch 1"x2"
|
|
COMMON SENSE METER 1"x2" Patch with hook Velcro backing. In OD green |
|
|
|
Dark side Morale patch 1"x2"
|
|
1x Dark Side 1"x2" Patch with hook Velcro backing. In OD green |
|
|
|
Evil Smiley Morale patch 1"x2"
|
|
1x Evil Smiley 1"x2" Patch with hook Velcro backing. In OD Green |
|
|
|
Fear Meter Morale patch 1"x2"
|
|
1x Fear meter 1"x2" Patch with hook Velcro backing. In OD Green |
|
|
|
Fubar Morale patch 1"x2"
|
|
1x Fubar "F*&ked Up Beyond All Reconition" 1"x2" Patch with hook Velcro backing. In OD green |
|
|
|
Gear meter Morale patch 1"x2"
|
|
1x Gear meter 1"x2" Patch with hook Velcro backing. In OD green |
|
|
|
Hooah meter Morale patch 1"x2"
|
|
1x Hooah meter 1"x2" Patch with hook Velcro backing. In OD Green |
|
|
|
Medical Red Cross ID Patch
|
|
Medical Red Cross ID patch. Great for quick identification of aid bags, blow out kits, Individual First Aid Kits, Medics themselves. 1.25 x 1.25 inches, Velcro backed In OD green |
|
|
|
T.W.A.T Morale patch 1"x2"
|
|
T.W.A.T morale patch (The War Against Terrorism) 1"x2" Patch with hook Velcro backing. In OD green |
|
|
|
Trunky Monkey Morale patch 1"x2"
|
|
Trunk Monkey 1"x2" Patch with hook Velcro backing. In OD green
Picture not of OD green patch |
|
|
|
U.S. forward flag patch 1X2 inch
|
|
U.S. forward flag Patch with hook Velcro backing. In OD green |
|
|
|
XXXXX METER
|
|
1x XXXXX Meter 1"x2" Patch with hook Velcro backing. In OD green |
|
|
|
2x Union Jack patch
|
|
2x Union Jack Flag sew on type |
|
|
|
Cloth SAS patch
|
|
cloth sew on SAS patch |
|
|
|
Para Wings patch
|
|
Cloth Para wings sew on patch |
|
|
|
Union Jack patch
|
|
1x Union Jack Flag sew on type |
|
|
|
ACU baseball cap
|
|
Ripstop Polycotton, ACU Camo one size fits all |
|
|
|
ACU BDU jacket new rip stop large
|
|
Ripstop Polycotton ACU Camo
in large |
|
|
|
ACU BDU jacket new rip stop Medium
|
|
Ripstop Polycotton ACU Camo
in Medium |
|
|
|
ACU BDU jacket new rip stop Small
|
|
Ripstop Polycotton ACU Camo
in Small |
|
|
|
ACU BDU jacket new rip stop XL
|
|
Ripstop Polycotton ACU Camo
in XL |
|
|
|
ACU BDU trousers new ripstop Large
|
|
Ripstop Polycotton
Large |
|
|
|
ACU BDU trousers new ripstop Medium
|
|
Ripstop Polycotton
In Medium |
|
|
|
ACU BDU trousers new ripstop Small
|
|
Ripstop Polycotton
In Small |
|
|
|
ACU BDU trousers new ripstop XL
|
|
Ripstop Polycotton
XL |
|
|
|
ACU boonie hat
|
|
1x ACU boonie hat |
|
|
|
BASEBALL cap in dpm
|
|
100% washed cotton, Velcro adjuster, duckbill peak. in camo |
|
|
|
BRITISH S/FORCES BUSH HAT
|
|
BRITISH S/FORCES BUSH HAT
Various sizes available please state size when ordering |
|
|
|
Desert dpm trousers 36" waist
|
|
100% Cotton,
5 pockets, zip fly,
waist side adjusters,
belt loops,
internal draw-string waist,
tie bottoms
|
|
|
|
Desert DPM trousers 38" wasit
|
|
100% Cotton,
5 pockets, zip fly,
waist side adjusters,
belt loops,
internal draw-string waist,
tie bottoms
|
|
|
|
Desert Shirt (DPM) 170/104 brand new
|
|
Size: 170/104, that is a 41-42" chest
Called "Jackets" these are worn and regarded as a shirt. This is one of the older style of shirt in the heavier weight of material. These shirts feature a zip and button front with double storm flap, two button down breast pockets, two arm pockets, shoulder eppaulettes, etc
|
|
|
|
DPM trousers 36" waist New
|
|
Polycotton, 5 pocket,
zip fly,
waist side adjusters,
belt loops,
internal draw-string waist,
36" waist |
|
|
|
DPM trousers 38" waist New
|
|
Polycotton, 5 pocket,
zip fly,
waist side adjusters,
belt loops,
internal draw-string waist,
36" waist |
|
|
|
Solder 95 shirt (dpm) new 180/122 large
|
|
Polycotton,
button down front,
2 front pockets,
button cuff adjusters,
epaulettes on front for rank slide
|
|
|
|
Solder 95 shirt (dpm) new 190/120 large
|
|
Polycotton,
button down front,
2 front pockets,
button cuff adjusters,
epaulettes on front for rank slide
|
|
|
|
VIPER BOONIE HAT
|
|
VIPER BOONIE HAT
Viper Boonie Hat Digital DPM.
Please state size when ordering |
|
|
|
Viper Digital DPM Shirt
|
|
Digital DPM CDU Shirt .
Please state size S/M/L/XL in comments box when ordering |
|
|
|
Viper Digital DPM Trousers
|
|
VIPER CDU TROUSERS
Viper CDU trousers digital DPM.
Please state size when ordering 30" /32"/34"/36"/38" |
|
|
|
Viper Special ops under armour shirt detachable sleeves 3 colour
|
|
VIPER SPECIAL OPS SHIRT IN DPM, DESERT DPM OR BLACK
Technical lightweight shirt
Fast wicking 100% polyester body panel
Poly cotton zip-off sleeves
Elbow and wrist padding
2 upper sleeve pockets with button closure
2 lower sleeve pockets with velcro closure
Zipped neck
Velcro on sleeve ready to affix patches on
Windproof cuffs with velcro adjustments.
The long-awaited Special Ops Shirt from Viper is here. With its fast-wicking body panel, this shirt provides warmth in cold climates and cooling in warm climates. The sleeves zip off just above the elbow enabling it to be worn as a short or long sleeve version.
Extra padding is provided across the shoulders, around the elbow and at the wrists. This is all built into the garment, making separate padded inserts redundant.
Please state size when ordering S/M/L/XL |
|
|
|
DDR-TYPE HAT WITH BADGE
|
|
DDR-TYPE HAT WITH BADGE
•Acrylic fur outer
•Polycotton lining
•Tied chin strap
Black |
|
|
|
Fingerless mitts - in black
|
|
In black with fold up mitt to cover fingers
Please note they come in black not like in picture. |
|
|
|
Fleece Gloves - Thinsulate
|
|
Fleece Gloves with Thinsulate in black.
Please state size when ordering. (M, L, XL) |
|
|
|
Fleece neck/hat gaitor in OD green
|
|
Can be used as a neck gaitor/scarf or hat with the pull cord In OD green |
|
|
|
Oakley black tactical gloves
|
|
Lightweight, High dexterity, bomber gloves
New Palm reinforcement without padding for better grip feel and grasping carbon fiber knuckle plating premium leather with flexible articulated construction.
Size Larger |
|
|
|
Oakley SI tactical gloves
|
|
Oakley SI Assault Gloves
• Durability and supple feel of leather
• Shielding of Kevlar reinforced knuckles with padding for comfort
• Moisture absorbing - fast-drying Clarino on palm
• Back strap to alleviate bunching in palm
• Shielding of full Kevlar padding on pinky finger
• Sure grip of high-friction surface on critical finger zones
• Adjustable cuff overlay
• Nose wipe area on thumb
• Knuckle protection, super grip palms, air vents and superb durability make this an excellent Assault glove.
• Materials include Leather, Spandex, Nylon mesh, Neoprene, Rubber, Carbon, lycra. |
|
|
|
Schampa USMC Seals Skull Half Face Scarf Call of duty! (t1)
|
|
-Material : 100% Polyster
-Simple, lightweight, Hook & Loop fastening,
keep the wind, dust, sand, and cold off.
-Any Season Usage
-Can use as scarf |
|
|
|
Schampa USMC Seals Skull Half Face Scarf Call of duty! (t2)
|
|
-Material : 100% Polyster
-Simple, lightweight, Hook & Loop fastening,
keep the wind, dust, sand, and cold off.
-Any Season Usage
-Can use as scarf |
|
|
|
Security Baseball cap
|
|
Polycotton, Velcro adjuster with duckbill peak
Fits all sizes |
|
|
|
Viper fingerless gloves RRP £12.99
|
|
Leather, padded hands & fingers. Velcro tightening strap
Please state size in comments box when ordering. |
|
|
|
VIPER SPECIAL OPS GLOVES
|
|
Lightweight made from advanced composite materials. Very tough and quick drying. Made with adjustable wrist support and hand adjustment band.
Size s/m/l/xl/xxl please state size in comments box |
|
|
|
Web-Tex Tactical Soft Shell Jacket
|
|
Made using waterproof tactical softshell material
•Storm proof zips with removable Web-tex pullers
•Two zipped side pockets and one zipped chest pocket
•Adjustable cuffs and draw string waist
•Velcro patches on each arm complete with subdued olive green Union Jack patch
|
|
|
|
Web-Tex Tactical Soft Shell Jacket in black
|
|
Made using waterproof tactical softshell material
•Storm proof zips with removable Web-tex pullers
•Two zipped side pockets and one zipped chest pocket
•Adjustable cuffs and draw string waist
•Velcro patches on each arm complete with subduedblack Union Jack patch
|
|
|
|
WEB-TEX XT BASE LAYER LEGGINGS
|
|
WEB-TEX XT BASE LAYER LEGGINGS
Mens military army type BASE LAYER LEGGINGS from Web-Tex
Base layer leggings feature:
-Made from 100% polyester
-rapid moisture deployment
-quick drying capacity
-providing warmth in winter
-cooling in summer
Leggins available in Black
Size Available: Medium
See also matching base layer top: Base Layer Top |
|
|
|
WEB-TEX XT BASE LAYER TOP
|
|
WEB-TEX XT BASE LAYER TOP
MENS MILITARY ARMY TYPE BASE LAYER TOP from WEB-TEX
Base layer features
100% quick drying polyester
Winter warmth
Summer cool
Colour: Black
Matching base layer leggings available
Made from 100% polyester, this top has rapid moisture deployment, quick drying capacity, providing warmth in winter and cooling in summer
Available in Black
Base layer mens chest sizes: Small 38", Medium 40", Large 42", XL 44", XXL 46"
Size Available: Medium |
|
|
|
5x any High cap magazine for AEGS
|
|
Save £15!
5x High cap magazine for any Airsoft gun (listed on website)
Can be a mixture on designs
Please state when ordering in comment box what type you would like. |
|
|
|
AK Electric Drum Mag (Sound Control)
|
|
AK Electric Drum Mag (Sound Control)
Material : ABS
holds 3500 Rounds 6mm BBs
Push button control
Powered by re-chargeable battery and comes with charger(needs 2 pin adapter)
Suitable for AK Series AEG |
|
|
|
ak47 magazine
|
|
ak47 magazine
Designs might vary |
|
|
|
Army Armament R27 M.E.U pistol magazine
|
|
gas
Holds 28 rounds
for the AA r27 meu pistol |
|
|
|
Element speedplate magazine pull pack of 4
|
|
Come it packs of four
Fits all m4 / m16 magazines inc high caps
Comes in black
simply screw into you magazine takes a minute to fit!
The Ranger is a floorplate replacement for current issue USGI 30 round magazines that incorporates an integral loop, floorplate lock and mag identifier. When installed on the base of a magazine, the Magpul Ranger provides unsurpassed speed and controllability during high stress, tactical magazine changes. |
|
|
|
g3 / sg1 magazine 500 rounds
|
|
For g3 Airsoft Gun
Holds 500 rounds |
|
|
|
g36 c-mag ( box mag ) 2500 rounds
|
|
Picture shows m4 c mag but this is for g36 AEG's
C mag g36 (all types)
2500 rounds
Electric
Wind up button
|
|
|
|
G36 Electric Double Mag (Sound Control)
|
|
Material : Metal and ABS
holds 1000 rounds 6mm BBs
Sound Activated Winding
3 Modes (Constant Winding for First Lading / Off / Sound Control)
Powered by re-chargeable battery and comes swith charger (needs 2 pin adapter)
Suitable for G36 series AEG |
|
|
|
G36 hi cap magazine 470 rounds
|
|
Hi Capacity Magazine for G36 series (AEG)
Holds 470 rounds
This gun fits all guns we have tried so far apart from KWA g36
Design and make may vary |
|
|
|
Glock AEP magazine std size
|
|
29 Round capacity
Full metal constuction
Fits CYMA CM030 and Tokyo Marui Glock 18 EAP + more |
|
|
|
High cap magazine for m4 / m16 / scar / SA80
|
|
High cap magazine for m4 / m16 airsoft guns as well as sa80 an Scar's
Holds 300 rounds
Design may vary |
|
|
|
high cap magazine speed winder for high caps
|
|
Fed up of winding up your magazine by hand? makes your fingers hurt?
you need one of these
Takes 2x AAA batteries
Lasts up to 300 winds per set of batteries
Works with 99% of all magazines |
|
|
|
M14 Electric Double Mag (Sound Control)
|
|
Material : Metal and ABS
holds 1000 Rounds 6mm BBs
Sound Activated Winding
3 Modes (Constant Winding for First Lading / Off / Sound Control)
Powered by re-chargeable battery and comes with charger (needs 2 pin charging adapter)
Suitable for M14 Series AEG |
|
|
|
m14 hi cap magazine
|
|
Metal hicap Clip for m14's AEG. Metal body, and comes with a key for winding, or can use usual wheel at bottom. Holds 280 rounds
Design and make may vary |
|
|
|
m4 16 scar sa80 magazine Green OD high cap 330 rounds
|
|
Fits m4 m16 m15 scar, sa80 and more.
330 rounds
Olive drab green |
|
|
|
M4 Electric Double Mag (Sound Control)
|
|
Material : Metal and ABS
takes 850 rounds 6mm bbs
Sound Activated Winding
3 Modes (Constant Winding for First Lading / Off / Sound Control)
Powered by re-chargeable battery and come with charger (needs Euro 2 pin charger adapter)
Suitable for M4 series AEG |
|
|
|
m4 m16 high cap with magpull in black on green
|
|
Make : battle axe
Capacity 300 rounds
Fits for m4 / m16 / scar / SA80 and more
|
|
|
|
Metal MP5 Magazine 200 rounds
|
|
Fits CYMA 027J, TOKYO MARUI, JG, MP5, ICS, ETC
Compatible with all MP5 BB guns that use Tokyo Marui fitments ie MP5k, MP5PDW etc
200 Round capacity
Metal construction
|
|
|
|
Pistol mag size speed loaders RRP £9.99
|
|
Speed loader for Mid caps etc |
|
|
|
Short vietnam type magazine for m4 m16 scar sa80 etc
|
|
# Metal Magazine
# Short profile Magazine
# 190 Round Capacity
# Wind-up Ratchet Type
|
|
|
|
Sig 550 / 552 high cap magazine 300 rounds
|
|
Sig 550 / 552 high cap magazine 300 rounds |
|
|
|
Speed loader (shaped like m4 magazines RRP £19.99
|
|
RRP £19.99
Great for loading your lo caps / mid caps / pistol mags / m203s with out hassle
Holds approx 400 rounds |
|
|
|
SR-25 High cap magazine
|
|
A&K airsoft Magazine for the SR 25
Holds 450 Rounds |
|
|
|
Steyr Aug Magazine hi cap
|
|
High capacity 330 round magazine for JG Steyr Aug AEG, colour - Black |
|
|
|
Tan M4 magazine high cap scar / m16 / sa80 / m15
|
|
M4 magazine
High cap
330 rounds
Colour Tan |
|
|
|
2 Pin Adapter for AEG chargers
|
|
This is needed for most AEG chargers that come with our guns. |
|
|
|
Adapter for g36 to accept m4 magazines!
|
|
Battle axe
Accept m4/m16 magazines in your g36
easy to fit. |
|
|
|
Element speedplate magazine pull pack of 4
|
|
Come it packs of four
Fits all m4 / m16 magazines inc high caps
Comes in black
simply screw into you magazine takes a minute to fit!
The Ranger is a floorplate replacement for current issue USGI 30 round magazines that incorporates an integral loop, floorplate lock and mag identifier. When installed on the base of a magazine, the Magpul Ranger provides unsurpassed speed and controllability during high stress, tactical magazine changes. |
|
|
|
Front RIS sling mount
|
|
Land arms front Ris sling mount enables you to put 3 point slings on Ris mounted gun. |
|
|
|
low profile long Ris mount for mp5 / g3
|
|
low profile long Ris mount for G3A3, G3A4, G3SG1, MP5A4, MP5A5, MP5SD6 & MP5SD5
-Standard 20mm Scope Rail
-Rail Length :115mm |
|
|
|
low profile short Ris mount for mp5 / g3
|
|
low profile short Ris mount for G3A3, G3A4, G3SG1, MP5A4, MP5A5, MP5SD6 & MP5SD5
-Standard 20mm Scope Rail
-Rail Length :115mm |
|
|
|
M4 Magazine catch (king arms)
|
|
King arms m4 magazine mag catch
Design may vary |
|
|
|
S-Thunder Airsoft Grenade Red/Gold
|
|
Charged with Top / Green Gas, the S-Thunder Airsoft Grenade can be filled with BB pellets, paintballs, pepper balls, powder balls or color powder and shoot these over great distances with a loud sounding bang. It can be used with any 40mm Launchers available in the market, or triggered by hand. The pellets or paintballs can stun the enemy and the colored powder can cause visual impediments to their movements. The unit is shipped with a standard core for Top / Green Gas, but can be used with high power gas including CO2 for more power by replacing the core with the High Power Replacement Core (ACC-XP02), sold separately.
SPECIFICATIONS:
Size: 4cm diameter, 11cm height
Filler: BB pellets, Paintballs, Colored Powder
Filler Volume: 80 BB Pellets, 7 x 11mm Paintballs or 4 x 17mm Paintballs
Powered by: Top / Green Gas
Sound Volume: 78-110dB
Effective Distance: 20-30m
Net Weight: 235g
|
|
|
|
Adapter for g36 to accept m4 magazines!
|
|
Battle axe
Accept m4/m16 magazines in your g36
easy to fit. |
|
|
|
m900 Tactical Weapon grip and light with LEDS for Ris / Ras mo
|
|
Fits 20mm Rails
3 stage or illumination Continuous on , pressure switch on and all ways off,
Two pressure pads for main light operation for left and right handers
Separate pressure switch to turn on 2x leds
uses 3x cr123a batteries
|
|
|
|
0.25g pro ball high grade ammo 3000 in bag
|
|
Super high grade
Double polished
0.25g
brand: pro ball airsoft http://www.proballairsoft.com
3500 per bag |
|
|
|
0.28g pro ball ammo 2500 in bag
|
|
Super high grade
Double polished
0.28g
brand: pro ball airsoft http://www.proballairsoft.com
2500 per bag |
|
|
|
0.30g pro ball ammo 2500 in bag
|
|
Super high grade
Double polished
0.3g
brand: pro ball airsoft http://www.proballairsoft.com
2500 per bag |
|
|
|
0.32g pro ball ammo bag of 2500 sniper grade
|
|
Super high grade
Double polished
0.32g
brand: pro ball airsoft http://www.proballairsoft.com
3500 per bag |
|
|
|
25 bags of 4000 0.2g pro ball high grade ammo
|
|
We are unable to provide this item untill end of aug due to low stock
25 bags of 4000 0.2g super high grade ammo
Super high grade
Double polished
0.2g
brand: pro ball airsoft http://www.proballairsoft.com
4000 per bag |
|
|
|
4000 0.2g pro ball high grade ammo
|
|
4000 0.2g super high grade ammo
Super high grade
Double polished
0.2g
brand: pro ball airsoft http://www.proballairsoft.com
4000 per bag |
|
|
|
Abbey Predator Gun Gas 134a
|
|
ABBEY Predator Gun Gas 134a is a high power, high performance gas for use in guns designed for 134a gas.
Ideal for hop-up guns. Abbey Predator Gun Gas 134a contains UPL, a high performance lubricant, especially formulated for the seals and internals of your gun. |
|
|
|
Abbey Predator Maintenance Gas 134a
|
|
Many guns spend long periods in shipping and storage. This may dry the seals and internal mechanism of the gun. Use Abbey Predator Maintenance Gas 134a to cure any sticking, valve leakage or under performance problems.
For all guns use Abbey Predator Maintenance Gas 134a about every 10 magazines to maintain top performance.
Abbey Predator Maintenance Gas 134a contains UPL, a high performance lubricant, especially formulated for the seals and internals of your gun.
Enjoy improved accuracy and better performance.
Abbey Predator Maintenance Gas brings guns back from the dead! |
|
|
|
Abbey Predator Ultra Gas
|
|
ABBEY Predator Ultra Gas is the ideal premium power high performance gas for blowback guns.
Abbey Predator Ultra Gas contains UPL+, a high performance, extreme pressure lubricant designed for the seals and internals of your gun.
Enjoy improved accuracy and better performance.
Enjoy more shots per can than leading competing brands.
Is your gun under powered or under performing? Use Abbey Predator Maintenance Gas 134a to cure dry and sticking seals and internals. |
|
|
|
Abbey Silicone Grease
|
|
Ensures maximum performance and power from all airsoft guns.
Excellent sealant and lubricant if wear is suspected.
Compatible with all other Abbey Products.
Recommended for airsoft guns.
Ideal for all moving parts in airsoft guns and anywhere a white grease is preferred. |
|
|
|
Abbey Silicone Gun Oil 35 aerosol
|
|
The best all purpose lubricant for airsoft guns .
Highly water and dirt repellent.
Beneficial to both barrel and stock.
Does not evaporate like mineral oils.
Aerosol has a special short straw for application.
A highly effective lubricant for the seals and internals of airsoft guns. It also produces a fine high sheen finish on all guns and accessories that protects from moisture and dirt, eliminating rusting and corrosion.
150ml cans |
|
|
|
Airsoft Extension Nozzle
|
|
Some magazines are deeply recessed and difficult to fill.
But not anymore, simply fit an Abbey Extension Nozzle and all refilling is made easy. |
|
|
|
Pro ball 0.25 tracer bbs 2000 rounds
|
|
Pro ball 0.2g tracer bbs 2000 rounds
2000 rounds of 0.2g tracerrounds
Super high grade 5.95mm +/- 0.01mm
White unlike most of Bio bbs! |
|
|
|
Pro ball 0.25g biodegradable 1kg ( 4000 rounds)
|
|
Pro ball 0.25g biodegradable 1kg ( 4000 rounds)
1kg approx 4000 rounds of 0.25g biodegradeable rounds
Super high grade 5.95mm +/- 0.01mm
White unlike most of Bio bbs!
One of the cheapest and best quality in the UK
|
|
|
|
Pro ball 0.2g biodegradable 1kg ( 5000 rounds)
|
|
Pro ball 0.2g biodegradable 1kg ( 5000 rounds)
1kg approx 5000 rounds of 0.2g biodegradeable rounds
Super high grade 5.95mm +/- 0.01mm
White unlike most of Bio bbs!
One of the cheapest and best quality in the UK
|
|
|
|
3x Spare outers for Thunder grenade: cylinder shape
|
|
3x Spare cylinder shells for Thunder grenade
outer shells only.
right hand of picture |
|
|
|
3x Spare outers for Thunder grenade: Pineapple shape
|
|
3x Spare Pineapple shells for Thunder grenade
outer shells only.
Left hand of picture (excludes fire pin) |
|
|
|
Reusable Gas hand grenade mk-2 360 spray
|
|
When these arrived i Just had to have ago after filling them up with approx 70 bbs and then put abit of green gas in it then i was ready!
I pulled the Pin and chucked it out the window.
a few seconds later POP! and the bbs went flying up to 15m ish meters.
Only down points i have noticed on these 1, Fuse time isn't the same every time goes any where from 3 seconds to 15. 2. Not all the bbs come out (which i wasn't too worried about as its the same with m203 shells and in a airsoft game long as its in range they are dead even if a bb doesn't hit them. 3, I found some of them quite hard prime and had to push on a table to prime.
Overall i quite like these even if there just for the look on your kit also will make people think twice if using these in CQB or even woodland.
Package info
1/1 BB frag grenade
6mm bbs
For Over 18s only
Holds approx 72 bbs
Can accept powder as well
Range up to 20m
Reusable |
|
|
|
300/600mA airsoft charger 230v and 12v charging
|
|
Charges 2, 4, 5, 6, 7, 8, 10 cell NiCd or NiMH battery
packs. (2.4V, 4.8V, 6.0V, 7.2V, 8.4V, 9.6V, 12V)
Delta-Peak microprocessor controlled charging,
switches to trickle charge once pack is charged.
Discharge function for NiCD battery packs.
300mA or 600mA selectable charging current
Mains 230V UK 3-pin plug. and car 12v adapter
Extra adapter required to charger mini battery connectors please view below option
|
|
|
|
Airsoft Smart charger for small and large batteries Idiot proof!
|
|
This is a battery charger that will charge 2.4volts up to 14.4volts(2-12 cells) worth of Ni-Cad / NiMH batteries so it will do anything from 700mA cells up to 5Ah cells. QUESTION Will it damage the battery? No its a -Delta V pulse charger so it will automatically cut off when battery pack is charged It charges at 500mA then drops to a trickle charge so it will not get your battery hot through excessive input current , It is "world wide voltage " so there is no trouble if you need it in any other country and it comes with large tamiya and large to I-Cybie connector |
|
|
|
10 x Thermobaric Grenade
|
|
Ideal for use at night or indoor games the Thermobaric Grenade produces a dazzlingly bright flash but with very little noise, this can distract other players to enable you to change positions or just get the drop on your opponents.
To use it is easy as can be. A quick shake, twist off the cap and use the end to strike the exposed fuse, like a saftey match. 7 seconds later the grenade will burst with a stunning bright light. The low volume of the report makes this a great choice for game areas where noise polution is a concern. |
|
|
|
150 Second Smoke Grenades
|
|
Compact smoke grenade that will emit a constant thick layer of "cool burn" smoke in one of 5 chosen colours for 150 seconds after striking the protected fuse. The grenade is designed so that smoke is expelled from a vent. This design minimises surging and also protects the surrounding environment reducing the risk of fire. |
|
|
|
30 Second Smoke Grenades
|
|
Compact smoke grenade that will emit a constant thick layer of "cool burn" smoke in one of 5 chosen colours for 60 seconds after striking the protected fuse. The grenade is designed so that smoke is expelled from a vent. This design minimises surging and also protects the surrounding environment reducing the risk of fire. |
|
|
|
60 Second Smoke Grenades
|
|
Compact smoke grenade that will emit a constant thick layer of "cool burn" smoke in one of 5 chosen colours for 60 seconds after striking the protected fuse. The grenade is designed so that smoke is expelled from a vent. This design minimises surging and also protects the surrounding environment reducing the risk of fire. |
|
|
|
Alarm trip mine (12g)
|
|
An extremely loud trip mine which fire a 12 guage shotgun blank when activated by the tripwire supplied. Numerous uses can be achieved by use of the imagination but they MUST be placed in a safe position. A small amount of Black Powder is ejected so these have to be placed either close to the ground or over 6ft in the air so that a players face can't come close enough to cause damage to the skin or eardrums. |
|
|
|
Ball Grenades - powder
|
|
Our powder grenade is a simple but devastating weapon ideal for the airsoft game. With a twist and strike ignition system the 7 second fuse is lit. On detonation multiple peas are launched with a satisfying bang making this an extremely effective ordinance. |
|
|
|
German Stick Grenades Pea Filled
|
|
German, world war 2 style stick grenade is a weapon that has a certain panash. Whether used in historical paintball or airsoft games or in any game these munitions are always popular. With a twist of the bottom cap of the stick a ignition string is exposed. A sharp pull of this string and the fuse is lit. 7 Seconds later On detonation multiple biodegradable peas are fired in all directions. |
|
|
|
GR-20 Sound units
|
|
GR-20 Sound units
Refills for the GR 20 aggressor
TLD MkV Cartridge and Ignition Cap for GR-20 Distraction Deivce. Single
The MkV 15mm cartridge delivers a 120dB sound. The Ignition caps are reloadable, and can be sent back and exchanged for a renew for a fraction of the cost. Please ring for further details. |
|
|
|
MK9 ThunderFlash
|
|
Thunderflash
Thunderflash Mk9, designed as a training device to realistically simulate a shell, bomb or other projectile ground strike.
This unit is a friction initiated fuse, burning for approximately 6 seconds resulting in a report equivalent to approximately 140db.
If a preplanned detonation is required, where remote firing of simulators is preferred, then an electrically initiated medium maroon would be more appropriate. Unlike a thunderflash, a maroon has a zero delay time. Recommended for outdoor use only |
|
|
|
spectrum mk 15 electric maroon
|
|
spectrum mk 15 electric maroon
Please note shipping for single items may be expensive due to postage implications on pyros
Over 18s only |
|
|
|
spectrum mk 9 electric maroon
|
|
spectrum mk 9 electric maroon
Please note shipping for single items may be expensive due to postage implications on pyros
Over 18s only |
|
|
|
spectrum mk3 electric maroon
|
|
spectrum mk3 electric maroon
Please note shipping for single items may be expensive due to postage implications on pyros
Over 18s only |
|
|
|
spectrum mk5 electric maroon
|
|
spectrum mk5 electric maroon
Please note shipping for single items may be expensive due to postage implications on pyros
Over 18s only |
|
|
|
spectrum mk7 electric maroon
|
|
spectrum mk7 electric maroon
Please note shipping for single items may be expensive due to postage implications on pyros
Over 18s only |
|
|
|
Thermobaric Grenade
|
|
Ideal for use at night or indoor games the Thermobaric Grenade produces a dazzlingly bright flash but with very little noise, this can distract other players to enable you to change positions or just get the drop on your opponents.
To use it is easy as can be. A quick shake, twist off the cap and use the end to strike the exposed fuse, like a saftey match. 7 seconds later the grenade will burst with a stunning bright light. The low volume of the report makes this a great choice for game areas where noise polution is a concern. |
|
|
|
Thunder Flash Mark 5
|
|
Thunder flashes, or flash bangs do exactly what you expect. When the 7 second fuse burns down the result is a loud bang and a bright flash. Each comes with a simple twist and strike cap ignition system that protects the fuse from damage or accidental ignition. |
|
|
|
TLD GR20 Distraction Device
|
|
Welcome to a new breed of BFG!
We bring you the all new TLD GR-20 Distraction Device.
This new revolutionary, compact training grenade is unique in the way that it's several grenades in one. This grenade can offer the versatility of being a single bang device, or the flexibility to deliver a multitude of different effects.
The device uses a patented 15mm reloadable cartridge system that is simple yet safe to the end user delivering a satisfying 120dB sound, as well as being cost effective compared to your average "throw and bang" consumable pyrotechnic.
The GR-20 is designed for realistic deployment with safety in mind as the firing system only initiates on release. Finally, the GR-20 is extremely reliable and looks amazing on your kit!
TAKING TRAINING SERIOUSLY.
100% reliable. If you get a failure we will exchange the faulty cartridge for new!
Individually serialised for security.
Various deployment accessories soon available including:
Metal Magentic base.
Coloured spoons for woodland.
Coloured bases.
Rubber spoon retainer.
Requires GR-20 Sound units to work. |
|
|
|
tlsfx multi bang Grenade
|
|
The STUN thermobaric emits the same huge magnesium white flash as the standard grenade but is then followed by two thunderflash reports equal to that of an Mk.5. |
|
|
|
Twin vent high density smoke screening grenade
|
|
The new Dual Vent Smoke Screening Grenade has been designed to create a thick blanket of smoke as quickly as possible. With a burn time of 30 seconds and twin vent construction coupled with our simple and familiar twist and strike ignition system makes the grenade especially useful for rapid assaults or withdrawals. Twice the number of smoke exit holes makes twice the quantity of cool burn smoke in the same amount of time. This design uses a similar vent design as our other smoke grenades to minimise surging, creating a smooth output and also protecting the surrounding environment reducing the risk of fire. |
|
|
|
Wireless firing System
|
|
WIRELESS FIRING SYSTEM
This is a wireless firing system for fireworks and pyrotechnics, ideal for battlefield simulations and firework displays works with maroons
The system includes:
1 Receiver.
1 Button transmitter.
Any receiver or set of receivers can be programmed to fire from any button on the |
|
|
|
Wireless firing System 2 Channel
|
|
WIRELESS FIRING SYSTEM
Can control 2 electric firing systems with 1 controller
This is a wireless firing system for fireworks and pyrotechnics, ideal for battlefield simulations and firework displays works with maroons
The system includes:
2 Receiver.
1 Button transmitter.
Any receiver or set of receivers can be programmed to fire from any button on the |
|
|
|
Wireless firing System 4 Channel
|
|
WIRELESS FIRING SYSTEM
Can control 4 electric firing systems with 1 controller
This is a wireless firing system for fireworks and pyrotechnics, ideal for battlefield simulations and firework displays works with maroons
The system includes:
4 Receivers.
1 Button transmitter.
Any receiver or set of receivers can be programmed to fire from any button on the |
|
|
|
Glow stick ( 12 hour) Blue / Green / orange / yellow
|
|
Assorted colours - blue, yellow, green, orange, lasts approx 12hrs
Please state colours when ordering. |
|
|
|
25mm ( 1 inch ) High scope mounts
|
|
25mm ( 1 inch ) High scope mounts
-Features:
-A pair of 25mm (1 inch) high mounts
-Fits all 20mm rail
|
|
|
|
25mm ( 1 inch ) low scope mounts
|
|
25mm ( 1 inch ) low scope mounts
-Features:
-A pair of 25mm (1 inch) low mounts
-Fits all 20mm rail
|
|
|
|
AK47 and AK74 Ris Rail top mount
|
|
AK47 and AK74 Ris Rail top mount
-Features:
-For AK-47, AK-47s and Beta Spetznaz Model AEG's Metal Construction
-Standard 20mm Scope Rail in width
-Easy hook up, install in just seconds
-All Matt Black finish
-Full metal construction
-Length : 14.6cm
-Weight : 86g |
|
|
|
element la rue m3 qd mount
|
|
-Features:
-install to Weaver or Picatinny 20mm rail system
-Full metal construction
-The cantilever design pushes your Aimpoint out over the D-ring
-Leaving more room behind to mount your NV
or even the new 3X Magnifier
-The base has a built-in watertight storage compartment for an extra battery
-Specification:
-Weight: 105g
-Height 75mm
-length: 50mm
-Ring Size: 30mm |
|
|
|
G36 Long Rails x 2
|
|
-Features:
- Spiderfire G36C Picatinny RIS 20mm Long Rail set
-CNC Machined Processed G36C/G3SAS Picatinny Side Rail + more
-Standard 20mm weaver Rail
-Easy to hook up, install in seconds
-All necessary nuts are included
-Weight :101g
-Rail Length :150mm |
|
|
|
G36C Picatinny RIS 20mm 3X Short Rail set
|
|
-Features:
- Spiderfire G36C Picatinny RIS 20mm Long Rail set
-CNC Machined Processed G36C/G3SAS Picatinny Side Rail
-Standard 20mm weaver Rail
-Easy to hook up, install in seconds
-All necessary nuts are included
-Weight :101g
-Rail Length :96mm |
|
|
|
Pair of (dia:30mm) High Weaver Mount for 20mm rail
|
|
-Features:
-A pair of 30mm High mounts
-Fits all 20mm rail
-allan key included |
|
|
|
QD Barrel Clamping Mount [Barrel Mount]
|
|
-Features:
-Full Metal Flashlight Mount w/ QD Nut
-Barrel Adaptor can be clamped to virtually all Rifles with a Barrel
-Fits all 20mm rail
-Ring Diameter : 25mm
-allan key included
|
|
|
|
Quick Release QD Raising 20mm Rail base
|
|
Quick Release QD Raising 20mm Rail base
-Features:
-install to Weaver or Picatinny 20mm rail system
-Full metal construction
-Turns regular mount into Quick Release QD mount
-Specification:
-Length: 60mm
-Weight:67g
|
|
|
|
RIS Rail for m4 / m16 carry handle
|
|
RIS Rail for m4 / m16 carry handle
-Features:
-Fit on Rifle with M4 Carry Handle
-5.5"/13cm Weaver Rail 20mm Base
-Easy Hook Up, Install in just seconds
-All Aluminium
-Specification:
-Weight: 65 gram
-base Length: 5.5 inch/130mm |
|
|
|
side 20mm Rail Scope Mount Base
|
|
-Features:
-3 side rail for Red Dot sight, laser or flashlight
-Full metal construction
-Matt black finish
-Length: 130mm
-Weight: 202grams
-Colour : Black |
|
|
|
Big dragon e9600 chronograph
|
|
Big dragon e9600 chronograph
Description:
- Firing speed: 0 - 3600 shots/minute
- Muzzle velocity: 2 - 600 meters/second
- Joule: 0 - 100 J
- For 6mm airsoft ammo with 0.20g or 0.25g or 0.30g or 0.60g
- Working voltage: external power DC 8.5V, internal reserve battery DC 4.8V
Specification:
- Size: 105 x 80 x 33 mm
- Weight: 280 grams
package Includes:
- 1 x Chronograph
- 1 x User Manual
- 1 x charger (US plug) Will Accept UK voltage (230v) requires adapter |
|
|
|
Fidragon Light weight chronograph
|
|
Fidragon Light weight chronograph
Description:
- Brand new item
- Three functions mode: MPS (Meter per second); FPS (Feet per second); J (Joule test)
- For 6mm airsoft ammo with 0.20g or 0.25g
- Powered by 4 x AA batteries (included)
Specification:
- Length: 150 mm
- Weight: 330 grams
Package Includes:
- 1 x Chronograph
- 1 x Tripod
- 1 x User Manual
- 4 x AA batteries |
|
|
|
Xcortech X3200 Ball Bullet Shooting Computer Airsoft Chronograph
|
|
Xcortech X3200 Ball Bullet Shooting Chronograph.
High Class Digital LCD Display ( Most models in current market are with cheaper LED display, but for this new chrono is installed with LCD one )
Reinforced PC Panel
Specifications -
1. Mode: J/cm2 / mm;g / MPS ( m/sec ), Joule, RPM ....
2. AUTO POWER OFF - 10 min / 20 min / 30 min / 60 min
3. SET MEMORY - 0.2g 6mm / 0.25g 6mm / 0.45g 6mm / 0.45g 8mm / 0.5g 8mm / 0.65g 8mm
4. BACK LIGHT
5. UNIT - MPS / FPS
6. Range of
MPS - 10.00 ~ 99.99 m/sec
100.0 ~ 400.0 m/sec
RPM - 100 ~ 9999 rds/min
Joule - 0.01 ~ 999 J
7. Battery : AAA Battery x 4 / Last for 14 hours
8. Weight : 240g
9. Size : L x W x H = 115 x 100 x 50 mm
|
|
|
|
8 in 1 tool kit with torch airsoft tool kit
|
|
8 in 1 screwdriver and torch kit. airsoft tool kit #1
Comes with
#0 Phillips
#1 Phillips
#2 phillips
6mm flat
4.5mm flat
3.5m flat
Glass's screwdrivers (flat and Phillips)
and a 6 LED torch
Design and colours may vary |
|
|
|
Element Pin opener for small tamia
|
|
Element Pin Opener for Mini-Connector
Takes the hassle out of taking pins off your batteries
Colour may vary |
|
|
|
Element Pin opener (large)
|
|
Element Pin Opener for Large-Connector
Takes the hassle out of taking pins and connectors off your batteries
Colour may vary |
|
|
|
Valve Key for gas magazines m203s etc
|
|
Valve Key for gas magazines m203s etc
Remove and adjust Valves in your magazines and m203s etc |
|
|
|
Bi pod for l96 etc with push fixing
|
|
-Features & Spec.:
-Spring loaded folding leg mechanism bipod for APS Type
-Leg extended by pulling the leg from 25cm to 36cm
-Holds over hundreds kilograms pressure
-Ultra light weight design
-Swing-able design for levelling on uneven ground
-All metal construction
-Water and shock resistant
-Material: Metal
-Weight: 540g
-Colour: Matt Black
- Fits warrior l96 and other snipers with the push fixing. |
|
|
|
Bi pod Stud fixing folding extendable from 16 to 23 cm
|
|
Bi pod Stud fixing folding extendable from 16 to 23 cm
-Features:
Idea for m14s, Snipers with thread for bi pod, non ris m4 etc.
Spring loaded folding leg mechanism bipod
Leg extended by pulling the leg from 16cm to 23cm
Holds over 100kg of pressure
Lock leg height and retract legs by pressing the lock
Ultra light weight design
Swing-able design for levelling on uneven ground |
|
|
|
Metal Bi pod for 20mm Rails
|
|
--Features & Spec.:
-fully metal constructed.
-fit all 20mm picatinny / Ris / Ras rail .
-length: 21cm
-weight: 340g
|
|
|
|
Metal extendable 17-25cm folding shooter bipod
|
|
Features & Spec.:
-You are getting a Military metal extendable 17cm to 25cm folding bipod
-Ultra light spring loaded folding mechanism bipod
-Fully adjustable spring-return legs
-Legs can be extended by pulling from 17cm to 25cm
-Legs can be locked by turning the tightening screw & retract legs by pressing the lock
-Swing-able design for levelling on uneven ground
-Not found on other bipod, this bipod is equipped with swinging thumb nut for adjusting tightness of swivel tilt-level for sniper aiming
-Direct attach to standard Rifle Q.D. Stud
-Full metal construction
-All Matt Black finish
-Length : 17cm to 25cm
-Weight : 249g
|
|
|
|
14 awg silicone wire (red)
|
|
14 awg silicone wire (red)
price is for 1 meter if you would like more please change the quantity in the shopping basket ideal for making up leads etc
Please note once cut we cannot take returns on this item |
|
|
|
2 into 1 mini pack adaptor
|
|
This Adaptor allows you to make two mini packs into 1 to give you double your capacity |
|
|
|
Deans Charger Adapter
|
|
This fits the male tamiya connector on a charger and converts it to charge the Deans Ultra connector on the battery pack. This is a good item to use if you don't want to void the warrantee of your charger by cutting the tamiya connector off and altering the charger. |
|
|
|
Deans Connector (female) with heat shrink tube
|
|
Deans Connector (female) with heat shrink tube
Supplied with red & black heat shrink sleeving to insulate the solder joint.
Connector only no cable |
|
|
|
Deans Connector (male) with heat shrink tube
|
|
Deans Connector (male) with heat shrink tube
Supplied with red & black heat shrink sleeving to insulate the solder joint.
Connector only no cable |
|
|
|
Larger to small adpater (charger adapter) large battery to small
|
|
Female Tamiya - male mini-
tamiya adapter lead. Used to
charge a battery with a small
connector from a charger
with a large connector. Also
used to convert battery with
small connector for gun with
large connector 100mm long. |
|
|
|
Mini-Tamiya (small) Connector (female)
|
|
Mini-Tamiya (small) Connector (female)
Connector only no wire |
|
|
|
Mini-Tamiya (small) Connector (male)
|
|
Mini-Tamiya (small) Connector (male)
Connector only no wire |
|
|
|
small tamiya to small tamiya (small battery to large )
|
|
Male Tamiya - female mini-
tamiya adapter lead. Used to
convert battery with large
connector for gun with
small connector. |
|
|
|
Tamiya (large) Connector (female)
|
|
Tamiya (large) Connector (female)
Connector only no wire |
|
|
|
Tamiya (large) Connector (male)
|
|
Tamiya (large) Connector (male)
Connector only no wire |
|
|
|
SD quick release silencer
|
|
Easy on off with real markings and "front towards enemy" lettering
•Silencer
Weight 360g
length 150mm
diameter 38mm
material Aluminium
Black
Flash hider
weight 100g
length 65mm
material steel
|
|
|
|
1400 mAh 8.4v Stick Pack For AEG Guns
|
|
1400 mAh 8.4v Stick Pack For AEG Guns
High performance stick type battery pack for AEG guns that use stick battery I.E MP5K, PDW AK47(s) etc
Mini type connector
Colours and make may vary |
|
|
|
2 x 3.6v Ultrafire rechargeable CR123A
|
|
-Brand New in packing
-The voltage of full charge and empty condition is 4.2V and 2.75V respectively.
-880mAh
Please note Please make sure your torch can accept 8.4V
|
|
|
|
2x Ultrafire rechargeable 3.0v CR123A Lithium battery
|
|
-Features & Spec.:
-Brand New in packing
-The voltage of full charge and empty condition is 3.0V and 2.0V
respectvely.
- 800mAh |
|
|
|
3300mah 8.4v Large battery
|
|
Large battery with large connector
for airsoft guns and RC items
rechargeable |
|
|
|
9.6v Mini battery 1500mah
|
|
Mini battery
9.6v
1500 mah unlike picture
quality cells |
|
|
|
cr123a battery
|
|
1x battery
for Super fire/sure fire torches tac lights etc
Picture for illustration only and design may be different |
|
|
|
cr2032 Battery
|
|
1x battery
For many Scopes and controls
|
|
|
|
Crane stock battery 8.4v 1500MAH
|
|
Crane stock battery 8.4v 1500MAH
Firefox Crane stock battery
Small Connector
image shows 9.6v this item is a 8.4v in two sticks of 4 and 3 cells
8.4v 1500mah NI-MH |
|
|
|
Crane stock battery 9.6v 1500MAH
|
|
Firefox Crane stock battery
Small Connector
Comes in 2 sticks no center battery like image
9.6v 1500mah NI-MH |
|
|
|
DBAL battery box
|
|
Battery not included picture for illustration only
Fits on 20mm Ris/Ras rail
Very smart looks like the real things but £500 cheaper! |
|
|
|
Element dbal PEQ battery base with 9.6v battery 1500 mah
|
|
20mm ris rail mounting
Made from ABS and aluminium
weight 180g
Battery in picture for illustration only and comes with a custom PEQ box battery
Comes with 1x 1500 mah 9.6v battery |
|
|
|
Element Pin opener for small tamia
|
|
Element Pin Opener for Mini-Connector
Takes the hassle out of taking pins off your batteries
Colour may vary |
|
|
|
Element Pin opener (large)
|
|
Element Pin Opener for Large-Connector
Takes the hassle out of taking pins and connectors off your batteries
Colour may vary |
|
|
|
ENERGIZER LR1 (Equiv.Duracell N) 1.5 volt batteries x2
|
|
2x ENERGIZER LR1 (Equiv.Duracell N) 1.5 volt batteries
you get 2 for the price other places charges for one
Please note they
dont come in the bubble package. |
|
|
|
LR44 Barreries x2
|
|
2x LR44 batteries
for most red dots and other scopes |
|
|
|
Mini battery 1500 MAH 8.4v
|
|
Mini battery
Now 1500mah unlike picture
Small connecter
11cm x 3.4cm x 1.5cm
Voltage: 8.4v
|
|
|
|
sa80 / l85 custom battery
|
|
8.4v 3300mAh rechargeable battery pack for a SA80 or the L85 |
|
|
|
Surefire CR123A battery (2 per pack)
|
|
Optimized for use in SureFire flashlights, SureFire Lithium batteries pack a lot of power into a small package. And-unlike alkaline batteries-SureFire High-Performance Lithium Batteries boast a ten-year shelf life, which means they will be ready when you need them, every time. For all SureFire Lithium battery powered lights
Fits super fire and ultra fire as well |
|
|
|
Ultrafire 3.0V and 3.6V CR123A charger
|
|
Features:
-Brand New Ultrafire rechargeable battery set
-can switch from charging 3.0V or 3.6V battery
-2 x 3.6V rechargeable battery included
Comes with UK 230v Lead for charger
Please make sure your torch bulb can handle 8.4v |
|
|
|
Folding Ris grip handle in black
|
|
Foldable Vertical Grip for 20mm Rail in black
Folds down with a press of a button then fold it up when you dont need to use it!. |
|
|
|
g&p Folding Ris grip handle in OD
|
|
G&P Foldable Vertical Grip for 20mm Rail in OD green |
|
|
|
A&K M249 MK2 Support Gun Two tone
|
|
UKARA OR SITE MEMBERSHIP NUMBER NEEDED TO BUY THIS GUN IF YOU ARE UNABLE TO PROVIDE THIS WE CAN ONLY SEND A TWO TONE GUN.
Features:
Tested ROF of approx 800 rpm
Full metal body and bi-pod with ABS stock and fore grip
Fully auto and safety
9.6v Mini type battery and charger included
Ability to use standard Classic Army box mags (not included)
300rd High cap mag included
Hop-up adjustable
This gun MUST use High Grade 0.2g or 0.25g BB's
PLEASE NOTE THIS DOESNT COME WITH A BOX MAG CA BOX MAGS ARE COMPATABLE WITH THIS GUN COMES WITH 1X HIGH CAP
Before ordering please make sure you read our terms and conditions Over 18s only and UKARA or site membership required please refer to our Conditions of Use on the left hand side of this page.
IF YOU CHOOSE THE SPARE MAGAZINE OPTION BELOW WE WILL INCLUDE M4 HIGH CAPS
OPTIONS BELOW - IF YOU DONT REQUIRE THEM PLEASE SELECT "NO THANKS" FROM THE DROP DOWN MENU |
|
|
|
Ares L86 A2 (Steel Body)
|
|
UKARA OR SITE MEMBERSHIP NUMBER NEEDED TO BUY THIS GUN IF YOU ARE UNABLE TO PROVIDE THIS WE CAN ONLY SEND A TWO TONE GUN
Specifications
Battery (not included)
Charger (not included)
Magazine Capacity 130rds (6mm BB)
Fire ModesFull Auto / Semi / Safe
Material Nylon Fiber + Steel
Motor High Torque Flat Motor
Hop-up Adjustable
Lenght 920mm
Weigh t5600g
Power 350 FPS +/-
Before ordering please make sure you read our terms and conditions Over 18s only and UKARA or site membership required please refer to our Conditions of Use on the left hand side of this page.
OPTIONS BELOW - IF YOU DONT REQUIRE THEM PLEASE SELECT "NO THANKS" FROM THE DROP DOWN MENU |
|
|
|
ARES M4 RAS2-L (Metal Body) V2
|
|
With flip up sight, RIS / RAS covers, hand grip and CNC front as standard. The gun also features lock back on the hop cover and comes with steel trigger & trigger guard.
This gun boasts a full metal steel gear set, is very reliable and strong and has the easy step up power system that ARES use.
Specifications
FPSApprox 310 +/-
RIS / RAS Covers Included
Capacity magazine 130rds
SightFlip up Adjustable
Battery Not supplied (required)
Motor High Torque
RIS / RAS Front Metal
Body Metal receiver
Weight 3250g
Length 803 / 893mm (In 5 Steps)
Fire Modes Full and semi auto
Hop Up Adjustable |
|
|
|
G&G g4 CQB-s
|
|
UKARA OR SITE MEMBERSHIP NUMBER NEEDED TO BUY THIS GUN IF YOU ARE UNABLE TO PROVIDE THIS WE CAN ONLY SEND A TWO TONE GUN
GR4 CQB S Specifications Model No : EGR-016-CS
Material Aluminium/Nylon/Fiber/Steel/Zinc/Plastic
Overall Length 765 mm
Weight 2650g
Gear box bearing 8mm ball bearing Motor 25000 rpm Hi-torque Long axis
Inner Barrel Length 275 mm
Magazine 450 Rounds
Muzzle Velocity 90-100m/sec with 0.2gBB (300 fps)
Before ordering please make sure you read our terms and conditions Over 18s only and UKARA or site membership required please refer to our Conditions of Use on the left hand side of this page.
OPTIONS BELOW - IF YOU DONT REQUIRE THEM PLEASE SELECT "NO THANKS" FROM THE DROP DOWN MENU |
|
|
|
G&G GR-16 CRW
|
|
UKARA OR SITE MEMBERSHIP NUMBER NEEDED TO BUY THIS GUN IF YOU ARE UNABLE TO PROVIDE THIS WE CAN ONLY SEND A TWO TONE GUN
GR16 C.R.W. Specifications Model No : EGR-016-CW
Material Aluminium/Nylon/Fiber/Steel/Zinc/Plastic
Overall Length 440 mm
Weight 2260g
Gear box bearing 8mm ball bearing Motor 25000 rpm Hi-torque Long axis
Inner Barrel Length 168 mm
Magazine 450 Rounds
Muzzle Velocity 90-100m/sec (300 fps) with 0.2gBB
Before ordering please make sure you read our terms and conditions Over 18s only and UKARA or site membership required please refer to our Conditions of Use on the left hand side of this page.
OPTIONS BELOW - IF YOU DONT REQUIRE THEM PLEASE SELECT "NO THANKS" FROM THE DROP DOWN MENU |
|
|
|
G&G PM5 / MP5 A5 Retractable stock
|
|
UKARA OR SITE MEMBERSHIP NUMBER NEEDED TO BUY THIS GUN IF YOU ARE UNABLE TO PROVIDE THIS WE CAN ONLY SEND A TWO TONE GUN
Material Aluminium/Magnesium/Nylon/Fiber/Steel/Zinc/Plastic
Overall Length 552 mm
Weight 2560g
Gear box bearing 8mm ball bearing Motor 25000 rpm Hi-torque Long axis
Inner Barrel Length 233 mm
Magazine 200 Rounds
Muzzle Velocity 90-100m/sec with 0.2g BB (300 fps)
Before ordering please make sure you read our terms and conditions Over 18s only and UKARA or site membership required please refer to our Conditions of Use on the left hand side of this page.
OPTIONS BELOW - IF YOU DONT REQUIRE THEM PLEASE SELECT "NO THANKS" FROM THE DROP DOWN MENU |
|
|
|
Socom Gear Novak NeXt 1911 free lanyard
|
|
Features:
Design approved by Novak
High kick recoil
Solid metal slide and frame
Upgraded internal with rubber buffer
Authentic engraving
The SOCOM Gear NOVAK NEXT features a nice, strong kicking-recoil and has been upgraded with a recoil spring rubber buffer. This beautiful pistol is Green (Top) Gas compatible straight out of the box, with an HSS Tactical Lanyard.
Includes:
1911 style magazine
Owners manual
14mm CW removable threaded muzzle adapter.
Adjustable Hop-Up
Power Source
Blowback
Lanyard
Orange tip (can be removed fairly easily)
Weight 1,082g
Length 218.0 mm
Capacity 15 rds
Power 295.0 fps
|
|
|
|
SRC G36C "2 Tone"
|
|
Strong, solid build and a quality second to none, what more can you ask for! The G36 is a very popular gun due to the folding stock and use as a main AEG for woodland. Fold the stock and hey presto you are ready for CQB.
With top, bottom and side ris rails for accessories and high cap mag included the src G36 can really kick some fire out from the 450 round magazine.
Comes as standard Pre upgraded with high torque motor, metal hop, and all the internal trimings you would expect from SRC
Specifications
RIS / RAS RailsSide And Botton Included
ConstructionFibre re-inforced Polymers & Metal
MotorHigh Torque
Hop UpMetal Adjustable
Magazine Capacity 470 rds
OPTIONS BELOW - IF YOU DONT REQUIRE THEM PLEASE SELECT "NO THANKS" FROM THE DROP DOWN MENU |
|
|
|
SRC M4 SR-16
|
|
UKARA OR SITE MEMBERSHIP NUMBER NEEDED TO BUY THIS GUN IF YOU ARE UNABLE TO PROVIDE THIS WE CAN ONLY SEND A TWO TONE GUN
Features:
Tested ROF approx 800
FPS Approx 300 +/-
Metal 300 BB capacity magazine
Adjustable sight
Battery not supplied (required)
Metal weaver base mount
Body Fibre re-inforced, metal RIS
Full and semi auto fire modes
Hop Up: Metal adjustable
This gun MUST use Hi-Grade 0.2g or 0.25g BB's
Before ordering please make sure you read our terms and conditions Over 18s only and UKARA or site membership required please refer to our Conditions of Use on the left hand side of this page.
OPTIONS BELOW - IF YOU DONT REQUIRE THEM PLEASE SELECT "NO THANKS" FROM THE DROP DOWN MENU |
|
|
|
DE Mini Uzi Electric Airsoft BB Gun
|
|
A neat little all-plastic UZI pistol with retractable stock. This is actually electric which fires in full-automatic mode and comes complete with rechargeable battery pack, charger unit and cleaning rod.
A nice cheap BB gun with out the heavy price tag if plinking is for you
* Safety and full auto modes
* 4xAA rechargable batteries included
* Charger included
* Small packet of BB's included
* BB clearing rod
* Approx 160 fps w/0.2 bb
* Length 380mm
|
|
|
|
Double Eagle P329 "2 Tone" BB Gun
|
|
This BB gun is small, strong and compact
comes boxed with small packet of BB's and magazine great for the garden. |
|
|
|
Jieke P99F "2 Tone" Airsoft BB Gun
|
|
This budget BB gun is modelled around the famous walther as used by many armed forces around the world
This gun comes with a host of accessories, including:
* Detachable front frame assembly
* Mock silencer
* Pressure operated Laser
* Small packet of BB's
* Mock top sight
* Approx 190 fps using 0.12 BB's
|
|
|
|
Element air seal Nozzle for ak47, ak74
|
|
Element air seal Nozzle for ak47, ak74 |
|
|
|
Element air seal Nozzle for m4 / m16
|
|
Element air seal Nozzle for m4 / m16 |
|
|
|
Element air seal Nozzle for mp5 a4, a5, sd5, sd6
|
|
Element air seal Nozzle for mp5 a4, a5, sd5, sd6 |
|
|
|
Element m105 st spring oil temper wire
|
|
Element m105 st spring oil temper wire high precision around 340 fps |
|
|
|
Element 6mm metal bearing set
|
|
Element 6mm metal bearing set |
|
|
|
Element 7mm metal bearing set
|
|
Element 7mm metal bearing set |
|
|
|
Element 8mm metal bearing set
|
|
Element 8mm metal bearing set |
|
|
|
Element Aluminium bearing piston head
|
|
element Aluminum bearing piston head
Internal bearings for avoiding spring tension twist.
The Element aluminium piston head does the opposite of the silent head in that it increases the 'banging' noise whilst firing. Its light weight ensures that no damage is caused to the piston face and is also very durable. |
|
|
|
Element Anti reverse latch
|
|
Element Anti reverse latch |
|
|
|
Element D shape pinion motor gear
|
|
Replacement D shape pinion Gear for your motor |
|
|
|
element full steel teeth piston for v2 / v3 gear box
|
|
element full steel teeth piston for v2 / v3 gear box |
|
|
|
Element Hi speed gear set and piston 16:1 ratio
|
|
High speed gear set for m95 m105 and m115 springs
Includes 1x gear sets (all 3 gears) and x piston
Level 3 kit designed for higher levels of power and speed. |
|
|
|
Element low resistance selector plate for Ak47 ak74
|
|
Element low resistance selector plate for Ak47 ak74 |
|
|
|
Element low resistance selector plate for m4 / m16
|
|
Element low resistance selector plate for m4 / m16 |
|
|
|
Element m115 st oil temper wire aeg spring
|
|
Element m115 st oil temper wire aeg spring high precision around 360 fps |
|
|
|
Element m125 st spring for vsr 10 and bar 10
|
|
Element m125 st spring for vsr 10 and bar 10 hi precision around 400 fps |
|
|
|
Element m145 st spring for vsr 10 and bar 10
|
|
Element m145 st spring for vsr 10 and bar 10 high precision around 460 fps |
|
|
|
Element m95 st oil temper wire spring
|
|
Element m95 st oil temper wire spring high precision around 310 fps |
|
|
|
Element O shape pinion motor gear
|
|
replacement O shape pinion gear for motors |
|
|
|
Element piston for v 2/3 gear box
|
|
Element polycarbonate piston for v 2/3 gear box
Colour may vary |
|
|
|
Element replacement standerd gear set
|
|
Replacement gear set for standerd gear boxs
Contains all 3 gears |
|
|
|
Element Shim set 18 peices
|
|
Element Shim set 18 peices
6x 0.2mm
6x 0.3mm
6x 0.5mm |
|
|
|
Element Spring guide for m14
|
|
Element Spring guide for m14
as it says on the box.. |
|
|
|
Element Spring guide for ver 2 gearbox
|
|
Element Spring guide for ver 2 gearbox
as it says on the box.. |
|
|
|
Element Spring guide for ver 3 gear box
|
|
Element Spring guide for ver 3 gear box
as it says on the box.. |
|
|
|
Element Spring set for v2 and v3 gear box
|
|
Element Spring set
Spares for your v2 and v3 gear box |
|
|
|
Element standerd Tune Up Kit for V2 Gearbox
|
|
Element standerd Tune Up Kit for V2 Gearbox
Includes:
•Piston
•Piston Head
•Gears
•Spring Guide
•Anti-reverse Latch
•Metal bushings
|
|
|
|
Element standerd Tune Up Kit for V3 Gearbox
|
|
Element standerd Tune Up Kit for V3 Gearbox
Includes:
•Piston
•Piston Head
•Gears
•Spring Guide
•Anti-reverse Latch
•Metal bushings
|
|
|
|
Element Tappet Plate Delayer/Sector Gear Cam Metal
|
|
Essential part for upgrading your Airsoft Electric Gun AEG
Gear sector clip fit the space better between sector gear and tappet plate
Basically this upgrade part can be enable for tappet plate (Nozzle bar) to delay it's releasing time.
Enable reliable BB Feeding in modified high performance AEG
Even though it is so small upgrade gearbox part, It will guarantee AEG's reliable performance
This parts has no side effects such as power loss or erosion of tappet plate.
This parts can be compatible to all Marui products (except PSG-1 & UZI), CA, ICS, Systema
As always, upgrading AEG require necessary skill & technique to dissemble the gearbox, consult expertise if needed
|
|
|
|
Element tappet plate for v2 gear box
|
|
Element tappet plate for v2 gear box |
|
|
|
Element tappet plate for v3 gear box
|
|
Element tappet plate for v3 gear box |
|
|
|
Element Tune Up Kit Level 3 for Gearbox Ver. 2 ( Max Torque Gear
|
|
Element Tune Up Kit Level 3 for Gearbox Ver. 2 ( Max Torque Gear )
Package Includes:
- Max Torque Type Steel Gear
- Half-Teeth Piston
- One-Way Piston Head
- 6mm Steel Bushing
- Steel Anti-Reversal Latch
- Bearing Spring Guide
- Shim Set |
|
|
|
Element Tune Up Kit Level 3 for Gearbox Ver. 3 ( Max Torque Gear
|
|
Element Tune Up Kit Level 3 for Gearbox Ver. 3 ( Max Torque Gear )
Package Includes:
- Max Torque Type Steel Gear
- Half-Teeth Piston
- One-Way Piston Head
- 6mm Steel Bushing
- Steel Anti-Reversal Latch
- Bearing Spring Guide
- Shim Set |
|
|
|
Element max speed motor (long type)
|
|
Element long type high speed motor great ROF and build quality fits v2 and v6 gear boxs and more ( m4 / m16 etc )
High speed motors, in combination with high speed gears and a larger battery, can significantly increase your rate of fire. |
|
|
|
element max speed motor short type
|
|
Element max speed motor short type
High speed motors, in combination with high speed gears and a larger battery, can significantly increase your rate of fire. |
|
|
|
Element ultra torque motor long type
|
|
Element ultra torque motor long type
High torque motors are generally used for AEG's that have upgraded internals and springs and need a stronger motor to pull its spring |
|
|
|
element Ultra torque motor short type
|
|
element Ultra torque motor short type
High torque motors are generally used for AEG's that have upgraded internals and springs and need a stronger motor to pull its spring |
|
|
|
Element grease set for piston heads, gears and ball bearings / b
|
|
Element grease set for piston heads, gears and ball bearings / bushings. |
|
|
|
element lock pin set for g3 / sg1 / mc51
|
|
element lock pin set for g3 / sg1 / mc51 |
|
|
|
Element m4 lock pin set
|
|
Element m4 lock pin set
contains 2 body pins including 1x oval head pin for the front |
|
|
|
Replacement magazine tape spring for m4 magazine etc
|
|
Replacement magazine tape spring for m4 magazine etc |
|
|
|
Element 230 mm inner barrel for mp5a4 / a5 / sd5 / sd6
|
|
Element 330 mm inner barrel for mp5a4 / a5 / sd5 / sd6 or other airsoft guns that take a 230mm barrel
|
|
|
|
Element 248 mm inner barrel for p90 / sig552 / g36c
|
|
Element 248 mm inner barrel for p90 / sig552 / g36c or other airsoft guns that take a 248mm barrel
|
|
|
|
Element 301 mm inner barrel for thompson m1a1
|
|
Element 301 mm inner barrel for thompson m1a1 or other airsoft guns that take a 301mm barrel
|
|
|
|
Element 364 mm inner barrel for m4 / sig551 / m249 para
|
|
Element 364 mm inner barrel for m4 / sig551 / m249 para or other airsoft guns that take a 364mm barrel
|
|
|
|
Element 456 mm inner barrel for ak47, ak74, ak47 s, ak47 m
|
|
Element 456 mm inner barrel for ak47, ak74, ak47 s, ak47 m or other airsoft guns that take a 456 mm barrel
|
|
|
|
Element 591 mm inner barrel for psg-1
|
|
Element 591 mm inner barrel for psg-1 or other airsoft guns that take a 591mm barrel
|
|
|
|
Element hop rubber level 0 (for standerd gear boxs)
|
|
Element hop rubber level 0 (for standerd gear boxs)
|
|
|
|
Element hop rubber level 1 (for slight upgraded gear boxs)
|
|
Element hop rubber level 1 (for slight upgraded gear boxs)
|
|
|
|
Element hop rubber level 2 (for upgraded gear boxs)
|
|
Element hop rubber level2 (for upgraded gear boxs)
|
|
|
|
ACU MOLLE Hydration Carrier Pouch
|
|
This hydration pouch is perfect to be carried as MOLLE backpack, vest or body armour.
Carry up to 3L Hydration Water Reservoir
Polyester Insulation shelf for keeping temperature
Design to be attached on 1 Inch MOLLE Webbing
|
|
|
|
Black MOLLE Hydration Carrier Pouch
|
|
This hydration pouch is perfect to be carried as MOLLE backpack, vest or body armour.
Carry up to 3L Hydration Water Reservoir
Polyester Insulation shelf for keeping temperature
Design to be attached on 1 Inch MOLLE Webbing
|
|
|
|
Coyote Brown MOLLE Hydration Carrier Pouch
|
|
This hydration pouch is perfect to be carried as MOLLE backpack, vest or body armour.
Carry up to 3L Hydration Water Reservoir
Polyester Insulation shelf for keeping temperature
Design to be attached on 1 Inch MOLLE Webbing
|
|
|
|
Desert Tan MOLLE Hydration Carrier Pouch
|
|
This hydration pouch is perfect to be carried as MOLLE backpack, vest or body armor.
Carry up to 3L Hydration Water Reservoir
Polyester Insulation shelf for keeping temperature
Design to be attached on 1 Inch MOLLE Webbing
|
|
|
|
VIP COVERT ANGLED-DRAW HOLSTER in green
|
|
With double mag pouch weapon & ammo NOT included comes in green |
|
|
|
VIPER MODULAR ADJUSTABLE HOLSTER lots of colours
|
|
600D polyester, fully adjustable holster, with single mag pouch at front. Two threads on rear with press studs, to attach to the viper modular system. Takes virtually all pistols
|
|
|
|
VIPER TACTICAL LEG HOLSTER (lots of colours)
|
|
Drop leg holster with 2 elasticated quick-release leg straps & mag pouch
|
|
|
|
PANTAC Folding Magazine Dump Pouch ( Khaki )
|
|
- Fits Belts up to 2 inch / 5cm wide.
- Low profile when folded. Dimensions: 9W x 8H x 4D cm
- When extended, holds approx. 7 M4/M16 Magazines. Dimensions: 22H x 14 cm Diameter |
|
|
|
PANTAC Magazine Dump Pouch ( Khaki )
|
|
- Fits Belts up to 2 inch / 5cm wide.
- When not in use, tie up with Velcro Strap to keep low profile.
- CORDURA fabric. |
|
|
|
Viper Digital Dpm Folding dump pouch
|
|
VIPER FOLDABLE DUMP BAG DIGITAL DPM
FOR THE DISPOSAL OF EMPTY MAGS,MADE OF 600D POLYESTER, LARGE REINFORCED OPENING FOR EASE OF ACCESS FOR THE DISPOSAL OF EMPTY MAGS,DRAWSTRING CORD WITH LOCK TO PREVENT LOSS, ADJUSTABLE BELT ATTATCHMENTS,POUCH ROLLS UP & CAN BE HELD CLOSED WHEN NOT IN USE; DRAIN HOLES IN THE BOTTOM.
SIZE : 30X25 CM |
|
|
|
VIPER FOLDABLE DUMP BAG GREEN OR BLACK
|
|
For the disposal of empty mags. Made of 600D Polyester. Large reinforced opening for ease of access for the disposal of empty mags, drawstring cord with lock to prevent loss, adjustable belt attachments, pouch rolls up & can be held closed when not in use, drain holes in the bottom.
Comes in Green or black please state when ordering |
|
|
|
Viper Multiple gun Carrier / bag RRP £59.99
|
|
Viper Multiple Gun Carrier
This Viper multiple Gun carrier is one bag to fit everything - even converts into a rucksack.
Includes a pistol compartment, machine gun compartment & extending rifle compartment.
Enough space for 3 or more guns of different sizes, plus accessories.
The main space will hold most carbine sized AEG Airsoft weapons & cleaning rods and has an expandable rifle cover (zipped into the top) if you need a little more length to the bag.
Second pocket is thinner and can be used for another AEG/SMG weapon of short length, camo nets straps and maps/books etc. It's two thirds the length of the overall case.
Third pocket is for a pistol and a spare magazine, which are all held in place by handy elastic bands.
The fourth pocket can hold another pistol or magazines/batteries for the AEG
Fifth pocket again is big enough for a pistol or even a MAC11 (without magazine fitted)
At the back of the case is yet another thin pocket which is the full length of the case and could hold yet another AEG. It also has a clear plastic label slot on the back for you to put a contents list, address etc.
Made from strong waterproof 600D Nylon
Size 86cm x 28 cm
Colour: Black |
|
|
|
VIPER TACTICAL BAG RRP £65
|
|
5 external pockets offering easy access. External 2 D-cell flashlight sleeve. A wealth of internal storage features including pen holders, tracklights pouches & a number of various size pockets, padded & removable shoulder strap, reinforced side & floor panels & adjustable Velcro document divider, ID holder & Velcro badge strip Size 50 x 30 x 30cm |
|
|
|
VIPER TACTICAL PISTOL CARRIER
|
|
VIPER TACTICAL PISTOL CARRIER
Made from 600D polyester
•Tactical pistol and magazine carrier with protective padded internal
•External organisational pocket
•Reinforced carry handle
Size: 30 x 21 x 4cm
Available in Black |
|
|
|
Viper Tactical Weapons Carrier
|
|
Made from 600D polyester
Main compartment is 108cm by 34cm with padded foam interior with stock sleeves and securing straps
•Includes a full length zip with double pullers
•Front pocket has full modular plate
•Double rucksack style carrying straps
•Carrying handle
•Width adjuster straps |
|
|
|
SPECIAL OPS PACK Green RRP £49.99
|
|
45 litre day bag,
3 zipped compartments,
front middle & main.
Main compartment has hydration system pocket, with concealed hole at the top for feeder.
Webbing front & side compatible with the Viper/Molle Modular System.
Compacting straps on both sides.
Quick release belt strap
Please note: The green colour is darker in real life. |
|
|
|
Tactical Level 3 MOLLE Assault Backpack Bag
|
|
-Level 3 Assault backpack made by high density Nylon material.
-1" molle webbing throughout the backpack.
-4 zipper compartments and lots of inside pouches for storing.
-Adjustable shoulder, chest and waist strap.
-Hydration system compatible at the back .
-Hydration water bag is not included
-Strap and ring around the backpack, able to add-on pouches and accessories.
-Withstand harsh combat situation.
-Perfect for outdoor activities |
|
|
|
US Army Tactical Molle Assault Backpack Bag
|
|
-Utility backpack made by high density Nylon material.
-1" molle webbing throughout the backpack.
-Removable sternum strap.
-Adjustable shoulder, chest and waist strap.
-Hydration system drink tube exit hole on top of the backpack.
-Strap and clip around the backpack, able to add-on pouches and accessories.
-Detachable side pouches and waist bag which can be used alone.
-Total 8 zipper compartments.
-Withstand harsh combat situation.
-Perfect for outdoor activities. |
|
|
|
Viper patrol bag RRP £65
|
|
•8 external pockets offering easy access
•Specifically designed external compartment to house anything up to a 3 D-cell flashlight
•Reinforced plastic shoulder straps to facilitate use as a rucksack
•Reinforced base
Size: 80 x 34 x 30cm |
|
|
|
VIPER TACTICAL BAG RRP £65
|
|
5 external pockets offering easy access. External 2 D-cell flashlight sleeve. A wealth of internal storage features including pen holders, tracklights pouches & a number of various size pockets, padded & removable shoulder strap, reinforced side & floor panels & adjustable Velcro document divider, ID holder & Velcro badge strip Size 50 x 30 x 30cm |
|
|
|
WEB-TEX LIGHTWEIGHT DRY SACK 100-125 LITRE
|
|
WEB-TEX LIGHTWEIGHT DRY SACK
Super tough lightweight waterproof welded vinyl, Velcro closure with quick-release buckle & D-rings
Available in Olive Green
LARGE: 100-125ltr, 108 x 58cm, 38cm DIA
weight - 820g when empty |
|
|
|
Web-tex Patrol Pack 38 Litre
|
|
Web-tex Patrol Pack 38 Litre Patrol Pack
Web-Tex 38 litre Patrol Pack with padded back and shoulder straps
Two fixed side pockets
Two zipped pockets in the the lid
Patrol pack available in British DPM
Superb mid range rucksack
Made from 1000 denier waterproof Cordura. |
|
|
|
Web-Tex PLCE Full Size Bergen Rucksack
|
|
Web-Tex PLCE Full Size Bergen Rucksack
-Big Web-Tex 120 litre bergen rucksack
-Can detach and convert to a 20 litre day sack
-Two detachable side pouches, yoke
-Two zipped lid pockets
-small front pouch
-Side compression straps
-padded shoulder and waist belt
-Available in British DPM
-Made from 1000 denier waterproof Cordura.
- Weighs approx 2.7kg empty.
|
|
|
|
Dual loop fixing Arm and knee pad set soft linner in OD green
|
|
Dual loop fixing Arm and knee pads set soft linner in OD Green |
|
|
|
Full face mask with mesh eye piece black
|
|
Full face airsoft mask and goggles combo with mesh screen to stop misting.
Colour: black
Design may vary |
|
|
|
Knee and elbow pads ACU
|
|
Dual loop fixing Arm and knee pads (2 of each) set soft linner in ACU
Includes net bag |
|
|
|
Knee and elbow pads in Black
|
|
Dual loop fixing Arm and knee pads (2 of each) set soft linner in Black
Includes net bag |
|
|
|
Knee Elbow Protector Set(Multicam)
|
|
Here at Socom tactical we aim to offer a wide selection off products.
So our latest line is multi cam products.
Please note that these items are currently special order only and may take around 7 days to reach you.
What is Multi cam
MultiCam is a modern multi-environment camouflage pattern developed by Crye Associates in conjunction with U.S. Army Soldier Systems Centre (also known as U.S Army Natick labs). Crye Associates does not currently have a contract to produce MultiCam for any US military service, but MultiCam is featured heavily in the U.S. Army "Future Force Warrior" program. The pattern is available to civilians.
Please note this is not made by crye
Item info
Tactical Knee and Elbow Protect Pad Set Desert £17.99
Click to enlarge
Dual loop fixing Arm and knee pads (2 of each) set soft liner
Disclaimer
Please note: The design is based on multi cam pattern and is a slightly different shade/pattern and is classed as “woodland camouflage pattern” But made in reference to Multi cam style |
|
|
|
Tactical Knee and Elbow Protect Pad Set Desert/coyote
|
|
Dual loop fixing Arm and knee pads (2 of each) set soft linner in Desert colour
Includes net bag |
|
|
|
viper M88 HELMET + 3 covers
|
|
M88 HELMET + 3 covers
Covers include
Desert
Woodland
OD green |
|
|
|
VIPER NEOPRENE ELBOW PADS
|
|
VIPER NEOPRENE ELBOW PADS
Re-enforced pad
One size
Available in Olive green |
|
|
|
Viper Neoprene Knee Pads
|
|
These one size fits all Neoprene Knee Pads are fully adjustable with elasticated velcro straps
Reinforced pad
One size
Available in Olive Green or Black |
|
|
|
Viper Special ops knee pads green or black RRP £16.99
|
|
VIPER SPECIAL OPS KNEE PAD
-One size fits all, fully adjustable
-Elasticated velcro straps
-Hard wearing outer shield with embossed viper logo
-Shield stitched all around the outer edge for extra strength
-Available in Black and Olive Green
|
|
|
|
Webtex knee pads in DPM RR 14.99
|
|
One size fits all, fully adjustable, hard wearing outer shield, elasticated Velcro straps |
|
|
|
Bolle Bandido Safety Glasses Smoke Lens
|
|
Polycarbonate close fitting, anti-scratch , anti-mist lens. Sports style wrap around design provides maximum field of vision and comfort. Fitted neck cord. Panoramic vision, Modern design, High protection, Integrated side shields.
The Bolle name has come to symbolise the highest standards of quality and style in the eye protection market for more than a century. From sunglasses and safety spectacles to specialist goggles , ski glasses and sports eye protection, Bolle has become an established world leader.
Smoke Lens: EN 166(172) |
|
|
|
Bolle Spider shooting glasses
|
|
The stylish Spider design is giving Bolle’s own sunglasses range a run for its money. The safety range come in at a fraction of the cost, and as they are to the EN166 standard, they protect from impact,
- non-slip TIPGRIP temples
- non-slip nose bridge
- coatings anti-scratch, anti-static (according to versions)
- to EN166 F
|
|
|
|
Bolle Viper Safety glasses clear lens
|
|
Polycarbonate close fitting, anti-scratch , anti-mist lens. Sports style wrap around design provides maximum field of vision and comfort. Fitted neck cord. Panoramic vision, Modern design, High protection, Integrated side shields.
The Bolle name has come to symbolise the highest standards of quality and style in the eye protection market for more than a century. From sunglasses and safety spectacles to specialist goggles , ski glasses and sports eye protection, Bolle has become an established world leader.
Clear Lens: EN 166(172) |
|
|
|
C5 Polycarbon Daisy ate glasses with interchangeable lenses
|
|
Comes with
Box
4 pairs interchangeable lenses
Strap
glasses frame
Non ballistic proof suitable for airsoft etc only |
|
|
|
Daisy C4 glasses with interchangeable lenses
|
|
New With Glasses Pouch and Case
High Polycarbonate quality , Flexible, coated, Anti-Ultra Violet Ray lens and High Quality Durable Plastic Frame
4 pairs of different colour tinted coated lens :
With a sport belt strap which you can swap between strap or normal glasses
Spare Polycarbonate Frame
Elastic belt , pouch & case
|
|
|
|
Falan goggles wind and dust proof clear
|
|
-Features & Spec.:
-Wind Dust Tactical hunting Goggle Glasses UV-X400
-Polycarbonate lens withstand high impact
-Frame is made by bi-raw material
-The interior frame is seated with soft foam for comfort wearing
-Elastic belt strap made of nylon fiber, 25mm width
and about 35cm in max length
-Designed for long term use and helmet compatibility
-Weight:75.5grams
-Lens Colour clear
|
|
|
|
Falan goggles wind and dust proof clear
|
|
-Features & Spec.:
-Wind Dust Tactical hunting Goggle Glasses UV-X400
-Polycarbonate lens withstand high impact
-Frame is made by bi-raw material
-The interior frame is seated with soft foam for comfort wearing
-Elastic belt strap made of nylon fiber, 25mm width
and about 35cm in max length
-Designed for long term use and helmet compatibility
-Weight:75.5grams
-Lens Colour clear
|
|
|
|
Falatt Protective Eyewear Glasses with Spare Lens
|
|
Falatt Protective Glasses with spare lens
-Come with 4 different coloured Lens
(tinted black, yellow, clear and tinted UV)
-Outer lens coated with anti-fog coating
on interior and anti-scratch coating on exterior
-100% UV protection
-Frame is made by bi-raw material
-Glasses Bag is Included
-Weight: 133g
|
|
|
|
Guarder C4 Anti mist With multiple Lenses
|
|
Highly Durable & Flexible Protective Shooting Glasses
UV Protective Lenses
Full package comes complete with:
1. Soft padded belt mounted carrying case that can store everything inside
2. Four different colored tinted lens that are interchangeable
3. Durable plastic adjustable frame
4. Wiping cloth that can store the glasses
Tinted Lenses Specification:
- Neutral Gray: Provide true color definition. Ideal for everyday, all purpose wear
- Blue: 9% Transmission, Neutral Transmission. For extreme bright light usage
- Clear MLC: Clear Lenses with special multi-layer coating. Enhances visual acuity during low light condition
- Cadmium Yellow: High contrast yellow Lenses. Ideal for very low light condition
|
|
|
|
Guarder G3 glass's
|
|
interchangeable Lenses
4 colour Lenses
Protective case |
|
|
|
JACK PYKE PRO-SPORT SHOOTING GLASSES
|
|
JACK PYKE PRO-SPORT SHOOTING GLASSES
Exceptional comfort
•Polycarbonate scratch resistant lenses
•3 x changeable lenses - smoke, clear and yellow
•99.9% UVA/UVB protection
•Meets ANSI Z87.1 Safety rating
Comes in neat clip on banana carrying case with protective dividers for spare lenses |
|
|
|
Pro Goggle Fan assisted Full face mask
|
|
Pro Goggle Fan assisted Full face mask
- Fan assisted stops steaming up.
- Pantoscopic lenses
- Ideal for players who wear glasses
- Replaceable lenses
-Available in Black or green
- High and low fan setting.
- Reduced Fogging coated lenses
|
|
|
|
Pro Mask with mesh lens and forhead and neck protection
|
|
RRP £27.99
with forhead and neck protection
Mesh lens
Hard wearing
|
|
|
|
VIPER MASK COMFORTER
|
|
Neoprene - fits under mask for extra comfort |
|
|
|
Viper Tactical Glasses
|
|
Stylish practical protective safety glasses which feature:
4 x changeable lenses
Tactical hard shell storage case
Microfibre bag and cleaning cloth
Safety glasses meet ANSI Z87.1 safety rating
Viper tactical glasses are sun protection rated: UV400.
Lenses colours: smoke, grey, high contrast yellow and clear with multi-layer reflective tint |
|
|
|
VIPER TACTICAL GOGGLES - clear
|
|
Black goggles with elastic head band, fits face closely & tightly, ideal for all situations including urban, sun, dust, wind & snow, shatterproof polycarbonate lenses, UV protection Complete with soft carry bag
Clear lenses unlike picture |
|
|
|
VIPER TACTICAL GOGGLES - Tinted
|
|
Black goggles with elastic head band, fits face closely & tightly, ideal for all situations including urban, sun, dust, wind & snow, shatterproof polycarbonate lenses, UV protection Complete with soft carry bag |
|
|
|
QD Tactical 1 Point Greenish Sling 4 Rifle
|
|
-Features:
-Design to install on Rear Retractable Stock
-Sling is elastic for Close Quarter Battle use
-Both left & right handed compatible
-Allow maximum "Hand-Free" capabilities
-Constructed by Nylon, Size Adjustable (Max Circumference: 145cm)
-Colour: Greennish |
|
|
|
SA80 Rifle sling in OG
|
|
This three point rifle sling for the British Army SA-80 Assault Rifle is made from strong Cordura® nylon, padded and fully adjustable with military quick release (QR) buckle |
|
|
|
Tactical 1 Point Black CQB Sling
|
|
-Features:
-Design to fit on Rear Retractable Stock
-Sling is elastic for Close Quarter Battle use
-Both left & right handed compatible
-Allow maximum "Hand-Free" capabilities
-Constructed by Nylon, Size Adjustable (Max Circumference: 145cm)
-Colour: Black |
|
|
|
Tactical 1 Point Green CQB Sling for Rifle
|
|
-Features:
-Design to install on Rear Retractable Stock
-Sling is elastic for Close Quarter Battle use
-Both left & right handed compatible
-Allow maximum "Hand-Free" capabilities
-Constructed by Nylon, Size Adjustable (Max Circumference: 145cm)
-Colour: Greennish |
|
|
|
Viper 3 point sling
|
|
Adjustable, padded, quick-release |
|
|
|
Viper basic Rifle sling
|
|
Basic rifle sling in black |
|
|
|
Scrim in Green and black camo
|
|
Scrim in Green and black camo
Size 1m2 |
|
|
|
Scrim in Green OD
|
|
Scrim in Green OD
Size 1m2 |
|
|
|
Shemagh Green and black
|
|
Cotton with tassles, size 43 x 46
In green and black |
|
|
|
Shemagh sand and black
|
|
Cotton with tassles, size 43 x 46
In sand and black |
|
|
|
Shemagh white and black
|
|
Cotton with tassles, size 43 x 46
In white and black |
|
|
|
Hydration Pack 2 Litre Aquatex - British DPM
|
|
Hydration Pack 2 Litre Aquatex
Hydration Pack 2 Ltr Aquatex
-2 litre wide mouth TPU water bladder
-2 shoulder straps
-Detachable tap
-Sternum strap
-Multiple D-ring attachments
-Made form 1000d IRR Cordura. British DPM. |
|
|
|
Hydration Pack 2 Litre Aquatex - Desert Camo
|
|
Hydration Pack 2 Litre Aquatex
-2 litre wide mouth TPU water bladder
-2 shoulder straps
-Detachable tap
-Sternum strap
-Multiple D-ring attachments
-Made form 1000d IRR Cordura. Desert Camo. |
|
|
|
Water Bladder 1.5L
|
|
Aqua Bladder 1.5L
1.5L capacity
Pipe And Bite Valve
|
|
|
|
Water Bladder 2.5L
|
|
Aqua Bladder 2.5L
2.5L capacity
Pipe And Bite Valve
|
|
|
|
Web-tex aquatex hydration pack
|
|
The Web-Tex Hydration Pack IRR is a 10 litre daypack in British DPM camouflage 1000D waterproof cordura nylon with one zipped main compartment and an additional small zipped compartment. It comes complete with a 1.5 litre water bladder (similar to Camelbak),neoprene pipe cover and bite valve. Comfortable to wear all day and great for staying hydrated whilst on the move.
Key Features:
•Neoprene shoulder straps
•10 litre zip closed main compartment
•Zipped small compartment
•Waist and cross-chest straps
•Mesh back panel for ventilation
•1.5 litre water bladder
•Neoprene drinking pipe cover and bite valve
•1000D Waterproof Cordura
|
|
|
|
Jackal 3-d body system
|
|
Built on a Comfortable Bug Proof Netting
Hand Washable
Made From Durable Light Weight Polyster Fabrics
Rot/Mold and Fire resistant
3-D Leaf Like Foliage
Quiet and Rustle Free
Pre-Made, No Assembly Required
Sizes
1) Jacket 38-44 Trousers 32-38
2) Jacket 46-52 Trousers 40-46 |
|
|
|
Web-tex Concealment Vest RRP £38
|
|
Lightweight mesh vest with strategically placed strong elastic strips. All types of material can simply be up under the elastic to suit the terrain.
Complete with detachable hood, two quick-release chest straps & one quick-release waist strap. One size fits all |
|
|
|
Woodland Ghillie suit
|
|
-New Fidragon Sniper Woodland Hunting Ghillie Suit ST35
-One piece set
-Tactical camouflage ghillie suit
-One size fits most large to extra large body
-Full body suit to cover from head to toe
-Has opening for face, hands & feet
-Superior quality versatile design for use with many tactical applications
-Made from heavy duty polyester netting and lots of burlap to custom design
-Your ultimate camouflage scenario
-Superior quality ,Comfortable to wear |
|
|
|
Patrol boots sizes: 4-13
|
|
Super action black leather and 115OD cordura boot with Cambrella lining, padded cow suede collar, oil resistant rubber sole with steel shank, nylon laces, bronze eyelets & removable EVA inner sole. Available in black
Available in sizes: 4-13 please state in the comments box which size you would like. |
|
|
|
VIPER COOLMAX SOCK
|
|
Incorporating DuPont® Coolmax fabric which offers extra comfort. Resists shrinking, odours & mildew. Reinforced heel & toe, embroidered Viper logo on ankle. 40% Wool 40% Acrylic 20% Nylon Size 6-11 |
|
|
|
WEBTEX BOOT CARE KIT
|
|
Small folding kit approx. 26x14cm with Velcro fastening. Mesh pocket on reverse. Made from 1000 denier waterproof cordura. Kit includes: tin of Guardsman black gloss polish, large brush, small brush, polishing cloth & pair of 5ft boot laces |
|
|
|
ARMY URBAN STAR black t shirt
|
|
T-shirts are 170 gram 100% Cotton come is sizes S/M/L/XL Please state size when ordering |
|
|
|
black ak47 t shirt
|
|
ak47 t shirt in black
Size s/m/l/xl please state size in comments box when ordering |
|
|
|
Kill Em All T shirt in black
|
|
T-shirts are 170 gram 100% Cotton Comes in sizes S/M/L/XL please state when ordering |
|
|
|
Socom Tactical T shirt (2XL)
|
|
1x Socom Tactical T shirt in 2XL |
|
|
|
webtex Pin-Up Para Girl T-Shirt
|
|
Forces support team t-shirts. Made from 100% cotton with a weight of 170g. featuring a Pin-Up model.
Sizes s/m/l/xl/xxl please state size in comments box when ordering |
|
|
|
Web-Tex Pro-XT Jacket
|
|
Product Information
The Web-Tex Pro-XT Jacket was made to match the Web-Tex Pro-XT Trousers. They are finished with the ever-popular British DPM Camo pattern, and are both breathable and waterproof - they can be worn in a wide range of situations/conditions. The jackets have two front zipped elbow pockets covered with velcro storm-flaps, an internal chest pocket & adjustable cuffs.
WEB-TEX PRO-XT JACKET
Breathable-Waterproof
•Two front zipped bellows pockets with Velcro storm flap
•Internal access chest pocket
•Velcro adjustable storm cuffs
Available in British DPM
|
|
|
|
Web-Tex Pro-XT Trousers
|
|
The Web-Tex Pro-XT Trousers was made to match the Web-Tex Pro-XT Jacket. They are finished with the ever-popular British DPM Camo pattern, and are both breathable and waterproof - they can be worn in a wide range of situations/conditions. The trousers have two side pockets covered by velcro
Breathable-Waterproof
•Two side pockets with protective stom flaps
•Adjustable draw string waist
•Velcro ankle cuff adjusters
Available in British DPM |
|
|
|
JACK PYKE shotgun cartridge belt
|
|
Holds x26 10/12 bore cartridges, fully adjustable waist strap with quick release buckle
In Green |
|
|
|
PLCE belt
|
|
Strong webbing belt. Takes all pouches. Large quick-realse buckle opening. Made nylon/Cordura |
|
|
|
Security belt RRP £12.99 in black
|
|
Security belt RRP £12.99 in black
Approx. 32 - 50''
Black only |
|
|
|
Security patrol belt system
|
|
Includes mobile phone holder, notebook holder, glove pouch, baton/torch holder, key keeper & handcuff pouch all on belt with quick-release system - black |
|
|
|
Tactical belt in OD green
|
|
Ideal for holding Holsters and other belt mounted equipment. |
|
|
|
Viper special ops belt RRP £17.99
|
|
Viper special ops belt
Ultra-tough adjustable belt
Fits 30" to 40"
Available in: O/Green or Black |
|
|
|
Web-tex Concealment Vest RRP £38
|
|
Lightweight mesh vest with strategically placed strong elastic strips. All types of material can simply be up under the elastic to suit the terrain.
Complete with detachable hood, two quick-release chest straps & one quick-release waist strap. One size fits all |
|
|
|
Woodland Ghillie suit
|
|
-New Fidragon Sniper Woodland Hunting Ghillie Suit ST35
-One piece set
-Tactical camouflage ghillie suit
-One size fits most large to extra large body
-Full body suit to cover from head to toe
-Has opening for face, hands & feet
-Superior quality versatile design for use with many tactical applications
-Made from heavy duty polyester netting and lots of burlap to custom design
-Your ultimate camouflage scenario
-Superior quality ,Comfortable to wear |
|
|
|
VIPER MP5 DROP LEG MAG POUCH OD green
|
|
Includes 3 mag pouches and quick-release buckle
In OD Green |
|
|
|
wouxun Professional VHF or UHF Handheld Two-way Radio KG816
|
|
Each radio can be programmed to your own frequency and adjust other features with the programming cable which is available on our website.
|
|
Main
Features
·Frequency range can be
suitable for different countries
or areas:
·UHF: 400-470MHz/350-390MHz/400-480MHz/
420-520MHz/403-469.9875MHz
·VHF: 136-174MHz/245-250MHz/216-280MHz
225-226MHz
·Output Power:VHF:5W/1W
UHF: 4W/1W
·CTCSS/DCS scan
·DTMF encoding and decoding
·Bright flashlight illumination
function
·Begin/End transmitting
beep prompt
·1750Hz tone
·SOS function&distant
alarm function
·Inspection, monitor, stun
and kill function
·ANI (Caller ID)
·105 groups DCS/50 groups
CTCSS
·All calls,group calls
and selective calls
·VOX(level adjustable)
·Digital FM radio with
frequency display
·Call ringing
·English voice prompt
·Wide/Narrow bandwidth
selection (25KHz/12.5KHz)
·Reverse frequency function
·Multi scan mode
·Priority scan function
·High capacity Li-ion batterypack
·Intelligent charger
·Busy channel lockout
·Low voltage voice prompt
·Transmit overtime voice
prompt
·Adding channel scan
·Programmable by PC
·Wireclone function
Technical Specification
|
|
|
|
Wouxun Radio Kg-833
|
|
Each radio can be programmed to your own frequency and adjust other features with the programming cable which is available on our website.
Includes
1x radio
1x Charger
1x
|
Functions
( KG-833): |
 |
|
|
Main Features |
|
|
|
. 16 memory channels |
|
. 8 groups scrambler (Optional) |
|
. Output power VHF 5W/1W UHF 4W/1W |
|
. High/Low power can changeable by
top key |
|
. VOX (Level adjustable) |
|
. DTMF encoding and DTMF decoding |
|
. 105 groups D.C.S/50 groups CTCSS |
|
. DCS/CTCSS of RX and TX can be set
respectively |
|
. Busy channel lockout |
|
. Distant alarm |
|
. Multi scan mode (TO/CO/SE) |
|
. Inspection, monitor, stun, kill
and emergency alarm |
|
. Calling ring and ring overtime auto answer |
|
. Multi silent mode (QT/QTADT/QTXDT) |
|
. Channel steps
(5K/6.25K/10K/12.5K/25K) |
|
. Wide/Narrow bandwidth
selection (25KHz/12.5KHz) |
| |
|
Optional Features |
|
. 5/2 tone and 1750Hz burst tone |
|
. Priority scan |
|
. Digital FM radio |
|
Remark: If the radio with above
optional features, it will available
200 |
|
memory channels and 1 group
scrambler. |
| |
|
Super Features |
|
. Voice guide (Chinese / English) |
|
. Side key programmable |
|
. Wireclone function |
|
. Program by software |
|
. Come with 1300mAh/1700mah Li-ion
battery and intelligent charger |
|
|
Technical
indicators: |
 |
|
|
KG-833 Technical Specification |
|
|
|
|
Frequency Range |
VHF:
66-88/136-174/245-246MHz
UHF:
300-350/350-390/400-470/450-520MHz
PMR446: 446.0-446.1MHz |
|
Channel Capacity |
16 |
|
Channel Spacing |
25/12.5KHz |
|
Maximum Deviation |
±5KHz to 25KHz ±2.5KHz to
12.5KHz |
|
Frequency Stability |
±2.0ppm |
|
Operating Voltage |
7.4V |
|
Operating Temperature |
-30℃~+60℃ |
|
Battery |
1300/1700mAh(Li-ion) |
|
Standby Current |
50mA |
|
Antenna Impedance |
50Ω |
|
Dimension(without antenna&battery(L×W×H) |
103×62×39(mm) |
|
Weight(with antenna&battery) |
242g |
|
Transmitter |
|
RF Power Output |
VHF:5W/1W
UHF:4W/1W
PMR446:0.5W-4W |
|
Modulation |
16KфF3E/11KфF3E |
|
Spurious and Harmonious |
-36dBm<1GHz
-30dBm>1GHz |
|
FM Noise |
40dB |
|
Adjacent Channel Power |
70dB/60dB |
|
Audio Distortion |
≤5﹪ |
|
Receiver |
|
Sensitivity(12dB SINAD) |
0.25μV |
|
Selectivity |
60dB |
|
Intermodulation |
60dB |
|
Spurious Response Rejection |
65dB/70dB |
|
Audio Power Output |
500mW |
|
Audio Distortion |
≤3﹪(0.5W) |
Compare list of different
configuration |
|
KG-833 Main features |
The popular |
The upgrade |
The advanced |
|
Scrambler available |
Optional |
8 groups |
√ |
|
DTMF encoding and DTMF edcoding |
√ |
√ |
√ |
|
PMR446 standard |
√ |
√ |
√ |
|
Output power VHF 5W/1W UHF 4W/1W |
√ |
√ |
√ |
|
105 groups DCS/50 groups CTCSS |
√ |
√ |
√ |
|
Wide/Narrow bandwidth selection
(25KHz/12.5KHz) |
√ |
√ |
√ |
|
ANI(Caller ID) |
√ |
√ |
√ |
|
PTT ID |
√ |
√ |
√ |
|
TOT(Time-out timer) |
√ |
√ |
√ |
|
|
|
|
|
WOUXUN RADIO KG619
|
|
Great range we personally use these and got nearly a mile in range!
Each radio can be programmed to your own frequency and adjust other features with the programming cable which is available on our website.
Includes
1x radio
1x Desk top charger
|
Functions
( KG-619): |
 |
|
|
. 16 memory channels |
|
. 4 groups scrambler(Optional) |
|
. High/Low power can changeable when
transmitting |
|
. Dual channel standby modes |
|
. DTMF encoding |
|
. Announcement of scanned channel
number |
|
. Alarm |
|
. 8 groups DTMF selectable to
transmit |
|
. PTT-ID function |
|
. Electric quantity prompt when
power on |
|
. VOX level(adjustable by radio) |
|
. Squelch level(adjustable by radio) |
|
. Built-in CTCSS/DCS |
|
. Multi-scan function |
|
. TOT(Time-out timer) |
|
. Low battery warning |
|
. High capacity batterypack |
|
. Software program |
|
. Wireclone function |
|
|
Technical
indicators: |
 |
|
|
KG-619 Technical Specification |
|
|
|
|
Frequency Range |
VHF:
66-88/136-174/245-246MHz
UHF:
300-350/350-390/400-470/450-520MHz |
|
Channel Capacity |
16 |
|
Channel Spacing |
25/12.5KHz |
|
Maximum Deviation |
±5KHz to 25KHz ±2.5KHz to
12.5KHz |
|
Frequency Stability |
±2.0ppm |
|
Operating Voltage |
7.4V |
|
Operating Temperature |
-30℃~+60℃ |
|
Battery |
1500mAh(Ni-MH) |
|
Standby Current |
40mA |
|
Antenna Impedance |
50Ω |
|
Dimension(without antenna&battery(L×W×H) |
126×59×41(mm) |
|
Weight(with antenna&battery) |
328g |
|
Transmitter |
|
RF Power Output |
VHF:5W/1W UHF:4W/1W |
|
Modulation |
16KфF3E/11KфF3E |
|
Spurious and Harmonious |
-36dBm<1GHz
-30dBm>1GHz |
|
FM Noise |
40dB |
|
Adjacent Channel Power |
70dB/60dB |
|
Audio Distortion |
≤5﹪ |
|
Receiver |
|
Sensitivity(12dB SINAD) |
0.25μV |
|
Selectivity |
60dB |
|
Intermodulation |
60dB |
|
Spurious Response Rejection |
65dB |
|
Audio Power Output |
500mW |
|
Audio Distortion |
≤5﹪ |
|
|
|
|
Boom mic with PTT button
|
|
Boom Mic with Ptt button
Length of boom mic: 12cm;
Fits Kenwood 2 pin and our wouxwun radios |
|
|
|
Budget throat mic with PTT button
|
|
Budget throat mic
with PT can also work just on VOX
Fits Kenwood 2 pin radios or out wouxwun radios |
|
|
|
Discrete ear peice with PTT button ( spec ops )
|
|
Head set with stealth tube and PTT button
Ideal for door men and discrete usage
Fits 2 min Kenwood and our wouxwun radios |
|
|
|
Ear bone vibration type ear peice with PTT
|
|
Ear bone vibration type ear peice with PTT
Fits Kenwood 2 pin radios or our wouxwun radios |
|
|
|
heavy duty throat mic with PTT
|
|
fits neck sizes 12cm to 21 cm
Double sensor
Fits 2 pin Kenwood or our wouxwun radios |
|
|
|
Wouxwun Programing cable
|
|
To program and change settings on our wouxwun radios |
|
|
|
Body armour and plates 190/108
|
|
The Desert DPM jacket is filled with the lightweight kevlar armour filler. There is one pocket at front and one at rear - both are designed to hold the latest ballistic kevlar plate. Two ballistic plates are included with this lot. These look to be in unused and mint condition. There is also a rank slide at front. The jacket closes at the front with a broad velcro fastener. The side straps work perfectly and allow the wearer to adjust the waist size to fit. All Velcro, straps, buckles and material are in perfect working order. Overall weight is 4.9 kilos. A superb set of armour both for the collector and for those engaged in security or protection duties.
|
|
|
|
Osprey body armour
|
|
As current issue
Please state size when ordering!
Quote below
Latest issue British Army Osprey Armour cover in desert DPM. This Osprey Armour is the infantry version and is used by British forces on current deployments in Afghanistan and Iraq. The Osprey Armour the new enhanced body armour, which covers the entire front and back of the torso. Extremely rare as these were only issued from 2006. Cover is adjustable over the shoulders and at the sides. Cover opens at side with double velcro. Zip pockets are provided front and rear for insertion of ceramic plates. Interior side of armour is made with Coolmax fabric to aid wicking away of moisture from the body. Outer shell is made of Cordura for strength and stability. Cover is only for the torso portion, and does not include neck and arm pieces. |
|
|
|
Digital dpm south african assault vest
|
|
Digital dpm south african vest
Normal site price £30 and RRP is £39.99
End of line brand new products |
|
|
|
Viper Digital DPM Shirt large
|
|
Digital DPM CDU Shirt .
Clear out end of line brand new normal selling price £25 |
|
|
|
Viper Digital DPM Shirt medium
|
|
Digital DPM CDU Shirt .
Clear out end of line brand new normal selling price £25 |
|
|
|
Viper Digital DPM Shirt small
|
|
Digital DPM CDU Shirt .
Clear out end of line brand new normal selling price £25 |
|
|
|
Viper Digital DPM Trousers 34" clear out
|
|
VIPER CDU TROUSERS
Viper CDU trousers digital DPM.
normal selling price £25
Clear out item brand new end of line
|
|
|
|
Viper Digital DPM Trousers 36" clear out
|
|
VIPER CDU TROUSERS
Viper CDU trousers digital DPM.
normal selling price £25
Clear out item brand new end of line
|
|
|
|
Viper south african assault vest in ozcam clear out
|
|
Viper south african assault vest in ozcam clear out
Clear out end of line
In the image it is the large vest on the top right |
|
|
|
VIPER BOONIE HAT
|
|
VIPER BOONIE HAT
Viper Boonie Hat Digital DPM.
Please state size when ordering |
|
|
|
Viper digital DPM baseball cap
|
|
Baseball Cap in Digital DPM Detachable subdued green Union Jack patch One size fits al |
|
|
|
Viper Digital Dpm Folding dump pouch
|
|
VIPER FOLDABLE DUMP BAG DIGITAL DPM
FOR THE DISPOSAL OF EMPTY MAGS,MADE OF 600D POLYESTER, LARGE REINFORCED OPENING FOR EASE OF ACCESS FOR THE DISPOSAL OF EMPTY MAGS,DRAWSTRING CORD WITH LOCK TO PREVENT LOSS, ADJUSTABLE BELT ATTATCHMENTS,POUCH ROLLS UP & CAN BE HELD CLOSED WHEN NOT IN USE; DRAIN HOLES IN THE BOTTOM.
SIZE : 30X25 CM |
|
|
|
Viper Digital DPM Shirt
|
|
Digital DPM CDU Shirt .
Please state size S/M/L/XL in comments box when ordering |
|
|
|
Viper Digital DPM Trousers
|
|
VIPER CDU TROUSERS
Viper CDU trousers digital DPM.
Please state size when ordering 30" /32"/34"/36"/38" |
|
|
|
Viper m16 drop leg mag pouch
|
|
VIPER M16 DROP LEG MAG POUCH DIGITAL DPM
DOUBLE MAG POUCH WITH QUICK-RELEASE BUCKLE OPENINGS,TWO LEG STRAPS & BELT STRAP |
|
|
|
electronic ear defenders
|
|
These specifically designed professional ear defenders not only protect your hearing from gun fire, but also allow you to hear normal conversation and even game
•Fully tested and approved
•Padded ear cups and headband for optimum fit and comfort
•Fully adjustable
•Slim line and lightweight - approximately 235g
Olive Green with subdued Jack Pyke logo |
|
|
|
JACK PYKE shotgun cartridge belt
|
|
Holds x26 10/12 bore cartridges, fully adjustable waist strap with quick release buckle
In Green |
|
|
|
mil-com 3 in 1 plastic whistle on lanyard
|
|
Incorporates compass & temperature display, with lanyard
Available in Green
Length: 5cm (approx.)
Depth: 2.5cm (approx.)
|
|
|
|
Mil-Com Face paint 2 colour
|
|
Mil-com 2 colour face paint |
|
|
|
Special: - cant QR mount
|
|
cant mount |
|
|
|
VIPER MASK COMFORTER
|
|
Neoprene - fits under mask for extra comfort |
|
|
|
WALLET ON CHAIN inc camo
|
|
Folding wallet with Velcro closure, zipped & clear pockets, complete with strong chrome 60cm chain & clip |
|
|
|
WEB-TEX AMMO POUCH FLASK
|
|
WEB-TEX AMMO POUCH FLASK
Stainless steel flask with storage compartment in lid
Specifically designed to fit comfortably in the ammo pouch of any P.L.C.E equipment
Capacity: 330ml
Available in Black |
|
|
|
WEB-TEX COMBAT SURVIVAL KIT
|
|
Contains:
Quality Snap Knife,
Firestarter Firesteel,
Combat Wire Saw,
Sewing Kit,
Candle,
Compass,
fishing Kit,
Matches,
Emergency Whistle,
Signalling Mirror,
Pencil,
Safety Pins,
Snare Wire,
cotton Wool,
Water Purification Tables x 10,
Accident Report Form,
Survival Instruction
|
|
|
|
WEB-TEX FABRIC CAMO TAPE
|
|
WEB-TEX FABRIC CAMO TAPE
Camo pattern tape with fabric surface. Non reflecting. |
|
|
|
WEB-TEX LED ANGLE TORCH /FLASHLIGHT
|
|
6 LED high powered bulbs,
4 colour options,
100-120 hours burn time,
light range 20-30m,
far sighting range,
400-500m,
6 x AAA batteries included
in green |
|
|
|
WEB-TEX MACHETE IN SHEATH
|
|
WEB-TEX MACHETE IN SHEATH
Steel 26cm blade with wooden handle
Overall length: 40cm
Weight: 510g
OVER 18'S ONLY |
|
|
|
WEB-TEX SMALL FIRST AID KIT
|
|
Pouch with vertical and horizontal fittings. Zip closure. Made from 1000 denier waterproof Cordura. 20x10x2.5cm
Kit contains:
non-adherent dressing 5x5cm
6 assorted safety pins
waterproof dressing strip 4x1cm
2 alcohol-free wipes
bandage 5cm BP quality
antiseptic cream 50gms
crepe bandage 7.5cmx4.5m
Scissors |
|
|
|
WEBTEX BOOT CARE KIT
|
|
Small folding kit approx. 26x14cm with Velcro fastening. Mesh pocket on reverse. Made from 1000 denier waterproof cordura. Kit includes: tin of Guardsman black gloss polish, large brush, small brush, polishing cloth & pair of 5ft boot laces |
|
|
|
British Army 24 Hour Ration Packs
|
|
Please note these are heavy to post but please remember you can order up to 10 of these for £8.50 postage.
Contents subject to menu for current stock menus please email us.
The British Army use a ration called the 24-Hour Operational Ration Pack. Previous versions of this ration were called the ration packs (GS for General Service). Those rations included a lot of food in cans. By 1999, the GS rations were phased out and the newer GP (General Purpose) ration packs became the primary operational ration pack. Each pack contains up to 4,000 calories - the recommended daily consumption is 2,000 for women and 2,500 for men - and is designed to feed a young man aged 18 to 30 who has been involved in active operational duty.
Contents may vary!
All in all, it averages out at 30-odd separate packs of one sort or another:
An Oatmeal block
Chocolate bars or a bar of Kendal Mint Cake, according to the menu
Biscuits, brown (malted and hard, pack of six)
Biscuits, fruit-filled (malted hard garibaldi-like, pack of six)
Cheese, processed, or meat paté, according to the menu
Tea, Instant, White, 4 x sachets
Coffee, instant, 2 x 5 grams sachets
Sugar, quick dissolving, 8 x 10 grams sachets
Drinking chocolate mix, 1 sachet
Vegetable stock drink mix, 1 x sachet
Instant soup (varying flavours), 2 x sachets
Beverage whitener (non-dairy creamer), 2 x sachets
Gum, chewing, PK, 5 sticks
Sweets, boiled, 1 pack assorted flavours
Fruit drink mix, either orange or lemon (enough for 1 litre of drink)
Tissues, paper (Kleenex individual pack)
Waterproof matches (10) and striker (1)
Water purification tablets (6)
Features of the 24-Hour operational ration pack are:
An individual ration for normal use in the field
Ration is designed to feed one person for one day
It has been designed to provide a balanced nutritional diet
Can be eaten hot or cold
ORP provides an average of 4000 Kcal per ration
Ration is 10% protein, no more than 35% fat, 55% carbohydrate
Continuous consumption up to 15 days, ideally no longer than 30 days
Hot meals in flexible foil pouches
Rations packed in waterproof outer cardboard boxes
All ORPs have a shelf life of at least 3 years
The breakfast, main meal and dessert rations are of the boil-in-a-bag (retort pouch) variety and can be heated up by submerging them in boiling water heated up on a Hexamine Stove. The soup and drinks are in instant and/or powdered form.
British soldiers are issued Hexamine stoves, (NOT included in the Ration Packs) also called Tommy Cookers. These pocket-sized, foldable, solid fuel metal stoves use blocks of hexamine for fuel. These stoves be can used to heat up water for coffee/tea and to warm up the entrees. They also come with an adapter to hold a metal mug/canteen cup. These stoves are similar in design to the European Esbit stoves but are larger and come with different fuel.
|
|
|
|
MRE Veggie menu
|
|
MRE contents
Main course
Side dish
Dessert
Cracker or bread
Spread
Beverage powder
Spoon
Accessories (chewing gum, matches, ETC)
Main meal self heating
Please note you will get 1x veggie menu we are unable to supply what you ask for depending on current stock please state what you prefer and we will try and supply it.
Please note these are Sold as military accessories, not food for consumption but we and 1000's a like have eaten these with no problems |
|
|
|
MRES meat menu
|
|
MRE contents
Main course
Side dish
Dessert
Cracker or bread
Spread
Beverage powder
Spoon
Accessories (chewing gum, matches, ETC)
Main meal self heating
Please note you will get 1x meat menu we are unable to supply what you ask for depending on current stock please state what you prefer and we will try and supply it.
Please note these are Sold as military accessories, not food for consumption but we and 1000's a like have eaten these with no problems |
|
|
|
CS Gas, Key, Pistol Lanyard RRP £8.50
|
|
CS Gas, Key, Pistol Lanyard in Black |
|
|
|
KEY/ ID LANYARD
|
|
4cm diameter. Chrome backing with belt clip and black frontage. Ideal to hold keys and id badges. |
|
|
|
Security Baseball cap
|
|
Polycotton, Velcro adjuster with duckbill peak
Fits all sizes |
|
|
|
Security Clip on Tie
|
|
Clip on Tie in Black
Made of cloth |
|
|
|
Security patrol belt system
|
|
Includes mobile phone holder, notebook holder, glove pouch, baton/torch holder, key keeper & handcuff pouch all on belt with quick-release system - black |
|
|
|
Security T-shirt Large
|
|
Made from 170grm 100% Cotton
Comes in large for other sizes please contact us. |
|
|
|
Viper ID Arm Band (Black)
|
|
Adjustable elastic strap
2 reflective patches |
|
|
|
Viper Radio pouch for belt rigs
|
|
Viper security pouch for belt rigs |
|
|
|
VIPER SPECIAL OPS GLOVES
|
|
Lightweight made from advanced composite materials. Very tough and quick drying. Made with adjustable wrist support and hand adjustment band.
Size s/m/l/xl/xxl please state size in comments box |
|
|
|
VP ENFORCER GLOVE RRP £29.99
|
|
Viper Enforcer Glove. Kevlar lined and Sand Filled.
Large or XL please state when ordering |
|
|
|
4x 32 acog Scope & Doctor Style Sight
|
|
acog Scope & Doctor Style Sight
Acog is 4x 32 magnification
Doctor sight has no magnification |
|
|
|
Aimpoint replica 3XMag Magnifying Module scope with
|
|
-Features:
-compatibility with Aimpoint® sights and for maximum flexibility and increased performance in the field.
-The 3XMag is a revolutionary tool for military personnel, law enforcement, sport shooters and hunters.
-The versatile 3XMag also can be used as a handheld magnifying glass monocular for discrete observation and identification.
-No influence on point of impact -- No need for re-zeroing the sight
-The mount can be removed quickly by pressing a knob and twist counter-clockwise.
-Specification:
-System: Magnifying Module
-Magnification: 3X
-Eye relief : at 5° FOV 40 - 90 mm at full FOV 60 - 65 mm
-Length : 110 mm (4.3")
-Width/height : 44x41 mm (1.7" x 1.6")
-Ring width : 30mm
-Weight : 200 g (7,1 ounces) inc rubber cover |
|
|
|
Aimpoint style Red & Green Dot Rifle Scope
|
|
mount may Vary please contact us for current mount type
You are getting a Replica 30mm Aimpoint style with 5 brightness level red dot
and green dot sight scope
-Features:
-Stylish KA Aimpoint scope
-5 Levels red dot and green dot Brightness Control
-Designed for rifle and shotgun
-Standard X-Y Windage and Levitation click adjustment
-Short Footprint with protective rubber flap covers allow this unit to brave
the harshest situations
-45 degree Cantilever KAC Scope Mount included for fast installation
-Anti-glare reflective coating on front facing lens also give good optical clarity
-Specificaton:
-Reticle Type: Illuminated 4 M.O.A. Red Dot & Green Dot
-Magnification: 1x
-Focus Type: Fixed
-Field of View (100 Yards): 88
-Eye relief (min): Parallax Free & UNLIMITED Eye Relief
-Windage & Elev Adj.: 1/4" Click @ 100 yards
-Material: All Metal
-Finish: Black Mate, All Weather Finish
-Mounting: Standard 20mm Weaver rail with Mounting ring included
-Battery: 2x LR44 Battery (Included)
-Length: 125mm
-Weight: 325g
-Waterproof, shockproof & Fog-proof
| | | | |