0% Interest Finance Available      |      Free UK Shipping over £100      |      Free Two Tone Service


01252 616868 / 01252 620 295

Arthurian Airsoft Excalibur Crusader
9244 Arthurian Airsoft
Manufacturer Arthurian Airsoft

Product Id : 9244

In Stock
 For same day dispatch

In Stock
 At warehouse (1 day delay)

Available Options:

Comment Box :
Ukara no :


Get it on Finance

From £00 per month
Ask a question about this product

Arthurian Airsoft Excalibur Crusader

This model is part of the Arthurian Excalibur range. There are several different models available, but the AEGs are made fully from metal, with a variety of external parts to complement each individual gun.

The Excalibur Crusader is the heaviest and largest model of the Arthurian Airsoft Excalibur range of AEGs. It was named after soldiers from the religious crusades spanning from the 11th to 13th century. The term 'crusader' has been used to refer to tanks, jets, military operations and now this gun.

The outer barrel measures at 19" with a 500mm inner barrel. The front sight is a fixed 'A' frame sight and it uses a standard delta ring, which means you can remove the launcher and replace it to create a standard handguard. The launcher itself has a safety and trigger guard meaning that accidental discharge is very unlikely.

Upper Receiver

The upper receiver is equipped with the standard 20mm Picatinny rail on the top, and the usual carrying handle already attached. One thing that makes this gun stand out is that although the forward assist is a dummy version it still moves back and forth when pressed.

Dust Cover

The dust cover locks into place and flips down when the charging handle is pulled, this also reveals the hop up unit. When the mock bolt plate comes back, it locks into place so the user can easily adjust the hop up without having to keep pulling the charging handle back. This can be released again by pressing the bolt stop on the lower receiver.

Lower Receiver

The lower receiver noticeably bears the 'Excalibur' logo laser engraved on the left side of the mag well. The bolt release, as mentioned before, releases the locking bolt plate. The fire selector settings are engraved with the standard 'Safe', 'Semi' & 'Auto' setting with a selector switch which clicks positively into place on each firing mode.

The Gearbox

The gearbox is very well constructed with components you'd expect from most mid-range AEGs, however, the Excalibur series comes preinstalled with 8mm bearings, a 15 metal tooth piston, enhanced tappet plate and of course the E&C spring change system.

This model comes with a fixed position, solid stock giving you plenty of battery space in the rear. Although this is the same as the Veteran model, the Crusader is installed with the E&C quick change spring system. Simply unscrew the stock, slide it off and it reveals the removable nut at the back meaning it takes a little longer than 30 seconds, but a lot less than removing the gearbox.


  • Aluminium body with polymer stock and handguard
  • Underslung grenade launcher
  • Fixed front sight and adjustable rear sight
  • removeable carry handle
  • Rear sling loop
  • 14mm CCW thread
  • Runs of 7.4v lipo or li-ion
  • Comes with a 300 round high cap magazine
  • Firing Modes: safe/semi/full auto
  • Length: 1000mm
  • Inner barrel Length: 500mm



Oper8 7.4v 2200mah Lipo

Oper8 7.4v 2500mah Li-ion

E&C 190 round mid cap magazines

Proball 0.25g bbs

Buy this item and earn 250 points valued at £5.00.

4.5 520
There are no reviews for this product.

Write Review



NotificationsNotify me of updates to Arthurian Airsoft Excalibur Crusader

Socom Tactical - Airsoft Shop UK Rated 4.5/5 based on 520 Facebook reviews