0% Interest Finance Available      |      Free UK Shipping over £100      |      Free Two Tone Service

online@socomtactical.net

01252 616868 / 01252 620 295

Arthurian Airsoft Excalibur Recon M4 AEG
8691 Arthurian Airsoft
[0]
Manufacturer Arthurian Airsoft

Product Id : 8691

https://www.socomtactical.net/images/arthurian-excalibur-recon-1-S.jpg
£
£250.00
In Stock
 For same day dispatch

In Stock
 At warehouse (1 day delay)

Available Options:

Comment Box :
 
Type:
 
Ukara no :

Quantity

Get it on Finance

From £00 per month
Ask a question about this product


Arthurian Airsoft Excalibur Recon M4 AEG

The Arthurian Recon is part of the Arthurian Airsoft 'Excalibur' range of AEGs. There are several different models within this range, and something suitable for every player. The Excalibur AEGs are constructed fully using metal, with the option to add external parts so you can personalise the gun.

The outer barrel is only 4" long and has an integrated suppressor filled with foam which is 7.5" long, adding to the overall length of the rifle. The Excalibur range is highly popular and the Excalibur logo can be seen on the lower receiver. The gun is equipped with a bolt release which releases the locking bolt plate.

The fire selector settings are engraved with the typical 'Safe', 'Semi' & 'Auto' setting and there is a selector switch which clicks positively into place on each firing mode. The buffer tube is only 25mm long but does feature the Exchange & Chrono spring change system (an important feature of the Excalibur range).

To change the spring, you simply need to unscrew the ring on the stock tube, rotate the stock tube 45 degrees and pull it off. After that unscrew the knurled screw at the back and the spring & spring guide will pop out. Be careful not to let it fly across the room, it may release with some force. Ultimately, this process only takes about 30 seconds.

The gearbox

The gearbox is extremely well made. It resembles most mid range AEGs in terms of the components it is built with. All guns in the Excalibur series come preinstalled with 8mm bearings, a 15 metal tooth piston, enhanced tappet plate and the E&C spring change system.

The Arthurian Airsoft Excalibur Recon M4 AEG model comes with a battery compatible crane stock making it easy to find batteries that are compatible. The crane stock has two tabs at the back. If you press these then the back plate comes off, then you are able to remove the rear spacer and you can install your battery. The stock is adjustable between 6 positions which extend up to an extra 80mm giving you plenty of choice for a comfortable shooting configuration.

Features

  • Aluminium build with polymer stock
  • Suppressor
  • Adjustable stock
  • Fully railed handguard
  • Single point sling plate at rear of receiver
  • 14mm CCW thread
  • 20mm top rail on receiver
  • Flip up front and rear sights
  • Working bolt catch
  • Comes with 300 round high cap magazine
  • Runs off a 7.4v Lipo or Li-ion
  • Reinforced tappet plate
  • 8mm bearings
  • 15 metal toothed piston
  • Firing modes: safe/semi/full auto
  • Average FPS: 335
  • Length (stock collapsed): 703mm
  • Length (stock extended): 783mm
  • Inner barrel length:300mm

Recommendations

Buy this item and earn 208 points valued at £4.17.

4.5 520
There are no reviews for this product.

Write Review


Newsletter





Notifications

NotificationsNotify me of updates to Arthurian Airsoft Excalibur Recon M4 AEG

Socom Tactical - Airsoft Shop UK Rated 4.5/5 based on 520 Facebook reviews