A&K M60E4/MK43 Support Gun AEG

Bring the pain and overwhelming firepower with the A&K M60E4 support gun. This beast of a light machine gun will chug along and suppress all of your foes.

The M60E4 is built from metal, which gives it a realistic feel and also makes it tough. The handguard, top cover, pistol grip and stock are made from high density polymer. The stock has a folding metal shoulder rest, which helps to give you support whilst aiming and a moulded in sling mounting point. The top cover can be opened up by turning the latch at the back of the cover. With the cover open you can see the gearbox and dummy loading tray, it will also let you adjust the rotary hop unit. Underneath the body is the polymer pistol grip and fire selector, which will swap the M60E4 between safe and full auto.

Further along is the rear flip up iron sight, which can be adjusted for distance. Next up is the barrel quick release and barry carry handle (not to be used to carry the weapon). To release the barrel you push the lever away from the block it is housed in and then turn it until the barrel is released. You can then remove the whole barrel assembly. Underneat the barrel and gas piston assembly is the handguard with its built in foregrip, which will give you excellent control of the support gun. Just forward is the sling mount and bipod mount. The bipod folds up alongside the handguard and can be adjusted in length. a little forward of the bipod is the end of the gas piston assembly and if you twist the end you will feel it move and here it clicking. This is the rate of fire being adjusted using a voltage chip. and at the very end of the barrel is the flash hider, which is screwed on with a 14mm CCW thread. Having the 14mm CCW thread means you cans wap the flash hider out for another style or a tracer unit.

To load and power the A&K M60E4/MK43 you attach the magazine to the mount and connect the feed tube to the body. You then connect the wire for the magazine to its partner that is sticking out of the body, this wire is for the automatic feed system. To power the gun you slide you battery into the space in the magazine and connect the wire to the power wire sticking out of the body.

Specifications

• Metal construction with polymer handguard, top cover, pistol grip and stock
• Folding adjustable bipod
• Front and rear sling points
• Folding shoulder rest
• Quick detach barrel assembly
• Microswitch trigger
• Adjustable iron sights
• Threaded barrel (14mm CCW)
• 3500 round auto winding box magazine
• Adjustable hop-up
• Powered by 9.6v nimh or 7.4v lipo
• Adujustable fire rate by turning the end of the gas piston housing from 12 to 22 rps
• Modes: safe/full auto
• FPS: 340
• Length: 93.6cm
• Inner barrel length: 475mm
• Weight: 6.75kg

Recommendations

Proball 0.25g bbs

Oper8 7.4v Lipo Block 2200MAH

Oper8 7.4V Li-ion 2500MAH Nunchuck Battery

VB power 9.6v Mini battery 1600mah

A&K