Arthurian Airsoft Excalibur The Maul
The Arthurian Airsoft Maul is one mean looking gun. A great choice for those of you after a short gun with plenty of option for attachments.
The Maul is the ideal CQB M4, it has a short fully railed handguard for attaching grips, torches and other items. The top of the receiver is also railed for attaching sights, to help with aiming. The Maul comes with flip-up iron sights and the rear one is adjustable.
If you pull the charging handle you will open the dust cover and lock back the false bolt. This will then allow you to adjust the hop unit. When done adjusting the hop unit you press the bolt release catch on the left side and it will release the false bolt.
The stock is adjustable for different sizes and can be removed by undoing a castle knut to let you access the quick change spring system and easily change the spring when required. There is also a sling mounting plate at the rear of the receiver that allows you to easily attach a sling.
You get good range and accuracy from The Maul as well as good trigger response and rate of fire. Running off a 7.4v Lipo will give you great performance out on the field. Combined with the short length, it makes a great CQB M4 or a short weapon for all-round use. All the Arthurian Airsoft rifles have been upgraded internally with a reinforced tappet plate, 15 metal tooth piston and 8mm bearing to give you better performance.
The 2021 model Excalibur rifles now feature an inbuilt MOSFET into the trigger board and a rotary hop unit. MOSFETs help protect the trigger contacts from being burnt out when using 7.4v or 11.1v LiPo batteries, increases the efficiency of the battery allowing for more shots per charge and increase the overall performance of the gearbox with a slight increase rate of fire and snappier trigger response.
The rotary hop unit improves the stability of the hop and negates any chance of it coming loose as a result of vibrations. As a result, the hop will be more consistent and give you ore adjustment allowing for finer tuning for heavier BBs
The gearbox is extremely well made. It resembles most mid-range AEGs in terms of the components it is built with. All guns in the Excalibur series come preinstalled with 8mm bearings, a 15 metal tooth piston, an enhanced tappet plate and the E&C spring change system.
The Arthurian Airsoft Excalibur Offspring model comes with a thin MFT type stock. You can easily fit a 7.4v stick battery in the stock tube. To install the battery, simply pull the adjustment lever down and slide the stock off to gain access to the stock tube. There are 6 positions available to adjust the stock to, giving you plenty of choice for shooting configuration.
- Full metal construction
- Fully railed handguard
- 14mm CCW threaded muzzle brake
- Adjustable flip up sights
- Single point sling plate
- Adjustable stock
- Working bolt release and charging handle
- SHS hop unit
- 8mm bearings
- Reinforced tappet plate
- 15 metal toothed piston
- Quick change spring gearbox
- Comes with 300 round high cap magazine
- Runs off 7.4v Lipo
- Firing modes: Safe/Single/Full auto
- FPS: 330
- Length (collapsed stock): 600mm
- Length (stock extended): 690mm
- Inner Barrel Length: 168mm