Back In Stock
Airsoft Stocks & Handguards
JG AUG Rubber stock pad
Jing Gong AUG Rubber stock pad Replacement rubber stock pad for AUG series AEG. Will fit Jing Gong, Classic Army and Tokyo Marui.
Airsoft Rails & Rail Kits
PTS ZEV Wedge Lock Handguard 9.5”
PTS ZEV Wedge Lock Handguard 9.5” The PTS® ZEV “Wedge Lock” Handguard is a very sleek, modern looking M-LOK compatible handguard that is skeletonized for lightweight without compromising strength. The handguard’s narrow cross-section provides for an excellent ergonomic grip and has slab sided surfaces for improved shooting stability off supported positions. It is given its [...]
Airsoft Rails & Rail Kits
PTS Enhanced Rail 9 slot Section ERS – M-LOK
PTS® Enhanced Rail 9 slot Section ERS – M-LOK The PTS Polymer Rail Sections are lightweight low profile 1913 rail sections. The double chamfered ends reduce snagging and is comfortable to index against. Available in 5 different lengths. SPECIFICATION Material – Dupont Polymer Colour – Black, Dark Earth Compatible with KEYMOD mount points Tapered at [...]
Airsoft Stocks & Handguards
ZCI G36c railed front hand guard
ZCI G36c railed front hand guard Fits most Airsoft g36c AEGS includes 2x side 1x top rail and sling look Made from solid ABS
Airsoft Stocks & Handguards
ZCI Airsoft M4 LE adjustable stock
ZCI Airsoft M4 carbine LE adjustable stock Fits airsoft spec stock tubes Maybe one of the most famous and well known M4 carbine stocks used by many military and police units around the world
Airsoft Holsters
CTM AAP-01 Holster (Right Handed)
A quick-release AAP-01 holster by CTM that locks around the trigger guard allowing you to have various accessories attached at the same time.
Back in Stock
Airsoft Battery Charging Harness
4mm banana plugs to: Male Deans, Male Tamiya, male mini-Tamiya. WHEN NOT USING THE DEANS CONNECTOR PLEASE MAKE SURE YOU KEEP THE COVER ON AS MAY CAUSE SHORTING IF THEY ARE ON A CONDUCTIVE SURFACE
Back in Stock
Vapex 700mA charger for LiPo/LiFe batteries (1-3 cell)
Vapex 700mA charger for LiPo/LiFe batteries (1-3 cell) Standard charger for LiPo or LiFe batteries with a 700mA charging output. Easy to read instuctions and indicating lights displayed to show you the status of your battery. Supplied with a UK 3 pin plug.
Airsoft Pistols
WE G17 GBB pistol w/ gold barrel
WE G17 GBB pistol w/ gold barrel Pre customised G17 gas blowback pistol, with silver flared magwell, vented slide, gold outer barrel and CNC trigger. Length:199 mm Barrel Length: 100mm Weight: 505 g Hop Up : Adjustable Shooting Model: Semi Gas Type: Green gas, red gas, propane adapter Muzzle Velocity: 300~330 FPS (0.2g BB) Magazine: [...]
Airsoft Submachine Guns
JG MP5 RIS AEG (Metal Body)
A full metal body airsoft MP5 version of the JG MP5 RIS AEG with an adjustable hop-up and great overall build quality
FMA Vault case perfect for pistols and cameras to keep them well protected/
FEATURES: Great replacement for the GHK g5 standard barrel •Airsoft stainless steel 6.02mm Inner Barrel. •Essential part for upgrading your airsoft AEG. •Stainless steel made tightbore upgrade barrel. •6.03mm precision inner airsoft rifle barrel. •Perfect for tighter grouping & more accurate shooting. •Increases FPS for higher velocityBuilt for extra power and precision shooting. •Length: 200mm [...]
Perun V2 Optical Drop-in Mosfet (Hybrid) – Front wired Perun V2 Hybrid replaces mechanical contacts in your airsoft replica or gel blaster and provides lots of useful features. Optical and magnetic sensors allow the elimination of many moving parts that are prone to damage, thus increasing reliability. Adaptive trigger control allows switching from a very [...]
Airsoft Rails & Rail Kits
AK47 / AK74 Side mounted 20mm top rail
Side mounted 20mm top rail for AK74 series PRODUCT DESCRIPTION: Military specification scope mount base Tactical design with QD lever, install scope onto your rifle in seconds Durable full metal construction 20mm standard Weaver / Picatinny rail base
Action Camera / GoPro Accessorie
ACM Gopro mount for 20mm Ris – Black
ACM Gopro mount for 20mm Ris – Black East and cost effective way to mount your go pro onto your gun’s 20mm Ris rail
Back in Stock
5.11 Covert Insert Small (Coyote)
PURPOSE BUILT Organize your gear or convert your carryall into an instant go-bag with a Covert Insert from 5.11 Tactical®. Measuring 15 x 10”, the Small Covert Insert is ideally sized for a backpack or briefcase and is fully compatible with web gear, MOLLE, TacTec, or any hook and loop storage system. A rigid structure [...]
Airsoft Knee & Elbow Pads
5.11 Neoprene Kneepad Set Black
Designed originally for our 5.11 Tactical Pants, our neoprene Kneepads have been designed to slip easily into the knee pockets of our pants and flex easily no matter what your activity. Whether you are working on the range, performing defensive tactics or involved in a critical incident, your knees need protection. The Kneepads can be [...]
Back in Stock
Rocket (SHS) M110 Spring Approx 350fps
Rocket (SHS) M110 Spring Approx 350fps Depending on Stock levels these will either come in Rocket or SHS packaging Power maybe different depending on Air seal etc M90 – 290-300fps M100 – 330-350fps M110 – 350-380 fps M120 – 380-410fps M130 – 410-440fps M140 – 440-470fps M150 – 470-500fps M170 – 550-600fps M190 – 650-700fps
A high-quality stainless steel tight-bore for your airsoft AEG. Provides better accuracy and consistency between shots.
Back in Stock
Rocket (SHS) M130 Spring Approx 410fps
Rocket (SHS) M130 Spring Approx 410fps Depending on stock levels these may come as either Rocket or SHS branding Power maybe different depending on Air seal etc M90 – 290-300fps M100 – 330-350fps M110 – 350-380 fps M120 – 380-410fps M130 – 410-440fps M140 – 440-470fps M150 – 470-500fps M170 – 550-600fps M190 – 650-700fps
Back in Stock
Ares Amoeba Striker – Long magazine 55rd
Spare long magazine for Ares Amoeba Striker holds 55 rounds
Includes free protective case. 26A continuous, 52A burst 136.5 x 18.8 x 12.7mm weight 66g.
Airsoft Shotguns
Golden Eagle M870 Shotgun M8870RW Wood Furniture
Gas-powered airsoft shotgun that can fire 3 or 6 shots at once with a fixed hop-up. The M8870RW has real wood furniture and a 20mm sight rail.
Airsoft Pyrotechnics
Tag Innovations “Shell EVO” Launching Device/Moscart (CO2)
Tag Innovations “Shell EVO” Launching Device/Moscart (CO2) The Shell EVO is designed to fire Tag Innovation rounds out of your 40mm grenade launcher up to 130 metres. It is constructed in two halves; the top half is a rifled polymer tube/barrel that is designed to have a round pushed into it. The rifling will stabilize [...]
Airsoft Pyrotechnics
Tag Innovations Reaper MK2 3.5S
Tag Innovations Reaper MK2 3.5S The Reaper MK2 is an explosive projectile with a 3.5-second fuse, which can be fired from the Tag Innovation ML36 or 40mm launching device, such as the Shell EVO. The tag rounds are made from polymer and polyurethane foam. The body has rifling grooves, which will lock into the rifling [...]
A high end replacement spring guide with ball bearings for version 3 gearboxes.
A high-quality stainless steel tight-bore for your airsoft AEG. Provides better accuracy and consistency between shots.
FEATURES: Great replacement for the GHK g5 standard barrel •Airsoft stainless steel 6.02mm Inner Barrel. •Essential part for upgrading your airsoft AEG. •Stainless steel made tightbore upgrade barrel. •6.03mm precision inner airsoft rifle barrel. •Perfect for tighter grouping & more accurate shooting. •Increases FPS for higher velocityBuilt for extra power and precision shooting. •Length: 340mm [...]
Back in Stock
Rocket (SHS) M120 Spring Approx 380fps
SHS M120 Spring Approx 380fps Depending on stock levels You will receive in SHS or Rocket packaging Power may be different depending on Air seal etc M90 – 290-300fps M100 – 330-350fps M110 – 350-380 fps M120 – 380-410fps M130 – 410-440fps M140 – 440-470fps M150 – 470-500fps M170 – 550-600fps M190 – 650-700fps
Back in Stock
EPES M249 CNC Hop Unit
EPES M249 CNC Hop Unit May have either Black or orange ring sent Second Generation of the well known M249 Hop-up chamber – Fixed to Barrel with 4 Hex screws – Improved shape for hop rubber lips – 0.4 and 0.6mm spacer / bucking -Axis Seat spacers – Precise CNC production for perfect fitting – [...]
Back in Stock
ZCI 3/4 Ported Cylinder – Type 2
ZCI 3/4 Ported Cylinder Made from anodized aluminium the ZCI 3/4 ported cylinder is a high quality cylinder for replacing your old one. The cylinder is ported on three sides and finished in black. Features Anodized aluminium 3/4 ported Internal diameter: 23.97mm Port distance from front: 52.16mm Ideal barrel length: 270-430mm Recommendations ZCI high speed [...]
AEG Barrels
ZCI Stainless Steel 6.02mm Inner Barrel 650mm
FEATURES: •Airsoft stainless steel 6.02mm Inner Barrel. •Essential part for upgrading your airsoft AEG. •Stainless steel made tightbore upgrade barrel. •6.02mm precision inner airsoft rifle barrel. •Perfect for tighter grouping & more accurate shooting. •Increases FPS for higher velocityBuilt for extra power and precision shooting. •Length: 650mm . •Compatibility: All Marui Compatible AEG that use [...]
A high-quality stainless steel tight-bore for your airsoft AEG. Provides better accuracy and consistency between shots.
AEG Barrels
ZCI (433mm) Stainless Steel 6.02mm Inner Barrel
FEATURES: •Airsoft stainless steel 6.02mm Inner Barrel. •Essential part for upgrading your airsoft AEG. •Stainless steel made tightbore upgrade barrel. •6.02mm precision inner airsoft rifle barrel. •Perfect for tighter grouping & more accurate shooting. •Increases FPS for higher velocity Built for extra power and precision shooting. •Length: 433mm . •Compatibility: All Marui Compatible AEG that [...]
A high-quality stainless steel tight-bore for your airsoft AEG. Provides better accuracy and consistency between shots.
CNC Aluminum Air Seal Nozzle (18.50mm) For Scorpion Evo Series
Back in Stock
MAXX Model CNC ICS Hopup Chamber MI – PRO w/ Tracer
MAXX Model CNC ICS Hopup Chamber MI – PRO w/ Tracer Fits ICS AEGS only CNC Aluminum Hopup Chamber MI Pro (with BB Latching System) & UV LED Tracer unit is precisely made to improve accuracy and ensure consistent air seal for ICS CXP/CS4/EBB (include old models) M4/M16 AEG series. The Hopup Chamber MI unit [...]
Back in Stock
MAXX Model M4 CNC Hopup Chamber ME – SPORT
MAXX Model CNC Hopup Chamber ME – SPORT CNC Aluminum Hopup Chamber ME Sport (with BB Catching System) unit is precisely made to improve accuracy and ensure consistent air seal for Tokyo Marui (include KRYTAC and KWA) M4/M16 Standard AEG series. The Hopup Chamber ME unit has a precision rotary dial design for fine hopup [...]
Back in Stock
MAXX Model CNC M4 Hopup Chamber ME – PRO
MAXX Model CNC M4 Hopup Chamber ME – PRO CNC Aluminum Hopup Chamber ME Pro (with BB Latching System) unit is precisely made to improve accuracy and ensure consistent air seal for Tokyo Marui (include KRYTAC, except KWA) M4/M16 Standard AEG series. The Hopup Chamber ME unit has a precision rotary dial design for fine [...]
Airsoft Tool Kits
ZCI Motor Pinion Gear Removal Tool
This tool is a must for replacing the pinion gear on your motors.
Back in Stock
ZCI Steel Birdcage M4A1 flash hider
ZCI Steel Birdcage M4A1 flash hider Metal replacement birdcage style flash hider for M4 series. -14mm thread fits most AEGs
ZCI Aluminium replacement carry handle for G36 series AEG Replacement aluminium carry handle for G36 series. More robust than the standard ABS carry handle, but please note it does not come with the iron sights.
Airsoft Rails & Rail Kits
ZCI CNC 416 NSHG Handguard 14.5″ – Black
ZCI CNC 416 NSHG Handguard 14.5″ – Black Fits HK 416 bodies Airsoft use only Doesn’t include fixing bolt (reuse standard 416 rail bolt)
Back in Stock
Rocket G36 CNC Hop unit inc Rubber
Rocket G36 CNC Hop unit inc Rubber Made from 7075 Aluminum with rotary adjustment
Back in Stock
Rocket (SHS) 13:1 High Speed Gear set
Rocket (SHS) 13:1 High Speed Gear set Depending on Stock Level these might come branded as SHS or Rocket Product Name:SHS New Type 13:1 Gear Set Product Introduction: — Chrome molybdenum alloy steel made sector gear — High strength, not easy to deform — CNC machining, enhanced gear to be more durable and bearing stronger [...]
Back in Stock
Rocket (SHS) Rotary Hop Up Chamber for M4 – Plastic
Rocket (SHS) Rotary Hop Up Chamber for M4 – Plastic Depending on Stock levels these will come branded as either SHS or Rocket A rotary style for precision adjustment Fits M4/M16 Airsoft guns except for some ICS and other brands that use proprietary hop units Includes hop Rubber
Back in Stock
Rocket M4 Silenced Bore Up Cylinder head
Rocket M4 Silenced Bore Up Cylinder head
Back in Stock
EPES 8mm M249 Bearings x 6
EPES 8mm M249 Bearings x 6 8mm bearings for M249 / M60. Original friction bearings
Back in Stock
EPES HPA Tank thread protector cover
EPES HPA Tank thread protector cover Duralumin cap HPA cylinders. Including space for spare cylinder O-ring seal.
Back in Stock
EPES 150 PSI Small pressure gauge – 1/8 NPT
EPES 150 PSI Small pressure gauge – 1/8 NPT
Airsoft Tool Kits
Epes Liquid Thread Locker/Sealant – Medium strength
Epes Liquid Thread Locker/Sealent – Medium Strength Epes liquid thread locker/sealent is ideal for locking threads in place. The syringe applicator makes for easy application. The thread locker works between temperatures of -60 and 150 degrees celsius. Set time for the thread locker/sealent is a minimum of 10-15 minutes with it fully setting in 24 [...]
Airsoft Tool Kits
Epes Liquid Thread Locker/Sealant – High strength
Epes Liquid Thread Locker/Sealent – High Strength Epes liquid thread locker/sealent is ideal for locking threads in place. The syringe applicator makes for easy application. The thread locker works between temperatures of -60 and 150 degrees celsius. Set time for the thread locker/sealent is a minimum of 10-15 minutes with it fully setting in 18 [...]
Back in Stock
EPES HPA Adapter for KWA / KSC
Epes HPA Adapter for KWA/KSC Epes HPA adapter is well built and well designed for use with your HPA weapons. The adapter will let gas release after the hose has been removed. Also check out Epes HPA self closing adapters. Features Stainless steel Silver Foster QD
Back in Stock
Epes AEG Piston Head ( POM )
Epes AEG Piston Head (POM) Epes bring you their polyoxymethylene AEG Piston Head. Made from high quality polyoxymethylene and coated in teflon to help reduce friction, this AEG piston head is well built and hard wearing. It features a bearing that will rotate with the spring and help stop deformation from spring pressure. It also has [...]
Airsoft Helmets & Headwear
WBD UCP Digital Baseball Cap
A UCP digital pattern baseball cap which is one size fits all. A classic US military-style shape and design