Ultra flexible and comfortable nylon frame
Ballistic polycarbonate lens
Non slip bridge
Integrated lateral protection
Comfortable and non slip temples
Anti-scratch, anti-fog coatings
Certified to STANAG 2920 and EN172, these RANGER ballistic protection sunglasses ensure maximum protection against any event. With its bridge, non-slip temples and lateral ventilation, RANGER provides comfort and protection.
RANGER is available in smoke, red flash and polarized.
Smoke lens : V50 188m/s (677 km/h)
Polarized lens : V50 189 m/s (680 km/h)
Red flashed lens : V50 187m/s (673 km/h)
Ballistic Resistance STANAG 2920.
The ballisitic resistance STANAG defined by NATO ensures compliance with standards ballistic protection for military of Bollé Tactical eyewear. Each lens and each screen suffer the impact of a steel cylinder equivalent to a 0.22 caliber” of up to more than 275 m / s or 990 km / h.
The STANAG standards are recognized in all member countries of NATO.
Mechanical risk – Low energy impact – F
Low energy impact, resists a 6 mm, 0.86 g ball at 45 m/s
Mechanical risk- High speed particles at extreme temperatures – T
The letter T, immediately after the mechanical strength symbol, authorises use for high speed particles at extreme temperatures.
Solar radiations risks: EN 172
Filter protection for industrial solar radiation.
Recommended for outdoor work, EN172 norm guarantee a protection of 99.99% from ultra-violet solar radiation.
Levels of application: 5-3.1 (Polarized) 5-2 (Twilight), 5-1.4 (ESP or CSP), 5/1.1-1.4 (Contrast), 5-2.5 and 5 to 4.1 (smoke)
Lens colour: depends on the lens technology
NEW ANTI-FOG AND ANTI-SCRATCH PLATINUM COATING
Bollé Safety revolutionizes eye protection with an innovation that meets all international standards, particularly EN166 option K and N.
This permanent coating applied on both surfaces makes them highly scratch-resistant (1.4 cd/m²), gives them high resistance to the most aggressive chemicals and slows the appearance of fogging. In any circumstances and at every moment, Platinum provides the highest safety for eyes.
*EN 166 option K : resistance to surface damage by fine particles. For the lenses to comply, light diffusion after abrasion must be less than 5 candelas per m².
*EN 166 option N : fog resistance. For the lenses to comply, they must be fog-free for a minimum of 8 seconds at 100°C.