EPES

Showing 85–98 of 98 results

Showing 85–98 of 98 results

Out of stock

Pistons. cylinders and heads

Epes Piston Head AOE Spacer Pads – 1.0mm

£3.50

Epes AOE Spacer Pads For Piston Head – 1.0mm Epes angle of engagement spacer pads are built of aluminium, which makes them light and durable. They come in a pack of 5. The spacer pads are placed behind the piston head to adjust the position of the last piston tooth to the last sector gear [...]

Out of stock

Pistons. cylinders and heads

Epes Piston Head AOE Spacer Pads – 0.5mm

£3.50

Epes AOE Spacer Pads For Piston Head – 0.5mm Epes angle of engagement spacer pads are built of aluminium, which makes them light and durable. They come in a pack of 5. The spacer pads are placed behind the piston head to adjust the position of the last piston tooth to the last sector gear [...]

Out of stock

Speedloaders and magazine accessories

Epes HPA Adapter MK2 for KWA / KSC

£17.00

EPES HPA Adapter MK2 for KWA/KSC Thread The MK2 EPES HPA adapter has been improved over the previous version with some minor structural changes. It is made of stainless steel and has been blackened to dull down the shine and to give it a sleeker look. This variant is designed to work with KWA/KSC threads [...]

Out of stock

Speedloaders and magazine accessories

Epes HPA Adapter MK2 for WE / KJW / GHK / VFC

£17.00

EPES HPA Adapter MK2 for WE/KJW/GHK/VFC Thread The MK2 EPES HPA adapter has been improved over the previous version with some minor structural changes. It is made of stainless steel and has been blackened to dull down the shine and to give it a sleeker look. This variant is designed to work with WE/KJW/GHK/VFC threads [...]

Out of stock

Speedloaders and magazine accessories

Epes Self Closing HPA Adapter For WE/KJW/GHK/VFC

£25.00

Epes Self Closing HPA Adpater For WE/KJW/GHK/VFC The Epes self closing HPA adapter is a one way design valve, which keeps pressure in the tank when the hose is disconnected. This also means, depending on the weapon, that several shots can be fired on the residual pressure. The Epes self closing HPA adapter uses a [...]

Out of stock
£25.00

Epes Hardox AR15 Multi-tool and barrel wrench – Black – AR15 / M4 / M16 Buffer tube, barrel nut, and flash hider tool – Made from High grade Hardox Steel – Available in 4 colour finish

Out of stock

Hop units and rubbers

EPES M249 CNC Hop Unit

£40.00

EPES M249 CNC Hop Unit May have either Black or orange ring sent Second Generation of the well known M249 Hop-up chamber – Fixed to Barrel with 4 Hex screws – Improved shape for hop rubber lips – 0.4 and 0.6mm spacer / bucking -Axis Seat spacers – Precise CNC production for perfect fitting – [...]

Out of stock
£45.00

EPES 100cm Braided HPA hose – Olive Green – Soft, flexible and furable composite materal – 300 PSI pressure safety – High flow inner diameter – Daytona systems approved Avaliable in Black, Coyote or Olive braiding

Out of stock
£54.00

HPA bottle refill station – DIN screw -300bar/4500psi HPA Tanks PCP DIN Refill Station -Tested to 5000 PSI Din . Fitting fits direct on most dive takes to fill up your HPA tank in seconds

Out of stock
£150.00

EPES Max Flow HPA low pressure regulator – Recommended minimum inlet pressure 850 PSI / 58 Bar – For best results run between 60 and 80 PSI – Spare 0 rings and tools included – Simple and effective adjustment and install – Includes overpressure valve

Out of stock
£10.00

EPES CNC Aluminium double O ring Nozzle 19.7mm – Double O ring for increased air seal – Highly durable over standard plastic Nozzles

Out of stock

HPA - High pressure Air

EPES 100cm Braided HPA hose – Grey

£45.00

EPES 100cm Braided HPA hose – Grey – Soft, flexible and furable composite materal – 300 PSI pressure safety – High flow inner diameter – Daytona systems approved Avaliable in Black, Coyote or Olive braiding

Out of stock
£10.00

EPES CNC Aluminium double O ring Nozzle 21.1mm – Double O ring for increased air seal – Highly durable over standard plastic Nozzles

Out of stock
£10.00

EPES CNC Aluminium double O ring Nozzle 21.2mm – Double O ring for increased air seal – Highly durable over standard plastic Nozzles

EPES Airsoft CNC Upgrades & Accessories Available Online

EPES is a manufacturer based in the Czech Republic which specialises in CNC machined airsoft upgrade parts, replacement parts and HPA systems for Airsoft guns. They make an AEG nozzle to fit almost any airsoft AEG, a high-end High-Pressure Air (HPA) system along which HPA valve adapters for WE Tech, Tokyo Marui, KJ Works & KWA gas magazines along with various airsoft tools, thread lock and technician specific products which every tech should have in their tool kit.

All of their products are machined to perfection to ensure there are no lemons in the batch. Check out their innovative range of self-closing HPA magazine adapters which allow you to keep pressure in your magazine in storage and prevent leaking from the seals.

High Quality CNC AEG Gearbox Upgrade Parts

They manufacture a number of AEG upgrade parts such as piston heads & cylinder heads and CNC hop units for the M249 and M60 support gun AEGs.

Browse our selection of EPES Airsoft products below and if there are any items you can’t find, please get in touch.