ZCI

Showing 64–84 of 168 results

Showing 64–84 of 168 results

Pistons. cylinders and heads

ZCI Aluminium Cylinder head with o ring

£9.00

ZCI Aluminium Cylinder head with o ring for v2 / v3 AEG gear box CNC made

Airsoft Stocks & Handguards

ZCI CNC AEG Stock Tube (Black)

£20.00

Heavy, strong and practical. This stock tube comes with all fixing bolts and screws as well as the tightening ring and sling plate. A good upgrade to other standard designs.

£60.00

ZCI CNC 416 NSHG Handguard 10.5″ – Black Fits HK 416 bodies Airsoft use only Doesn’t include fixing bolt (reuse standard 416 rail bolt)

Every thing else and electrical

ZCI STAINLESS AEG V2 GEARBOX SCREW SET

£5.40

Replacement v2 gearbox screws made from stainless steel

£60.00

ZCI CNC 416 NSHG Handguard 14.5″ – Black Fits HK 416 bodies Airsoft use only Doesn’t include fixing bolt (reuse standard 416 rail bolt)

£15.00

ZCI Replacement hop unit for Hi Capa GBB pistol Replacement hop unit for TM and WE Hi Capa series Colour may Vary

£15.00

A foregrip that with the press of a button can double up as a bi-pod for extra support when firing.

£35.00

High performance replacement motor. Built with torque in mind, this is a step up from the standard high torque motor; it offers a higher cyclic rate combined with a decent amount of torque. Works beautifully with high speed gears to offer supreme trigger response.Some modification and specialist knowledge may be required to install this motor.

£35.00

High performance replacement motor. Built with torque in mind, Works beautifully with high speed gears to offer supreme trigger response. Some modification and specialist knowledge may be required to install this motor.

Airsoft Stocks & Handguards

ZCI G36c railed front hand guard

£20.00

ZCI G36c railed front hand guard Fits most Airsoft g36c AEGS includes 2x side 1x top rail and sling look Made from solid ABS

£8.00

More colourful products to brighten up your AK. These air nozzles are made of aluminium for AK series AEG’s for a greater air seal and robust construction. Internal O-ring to create a perfect seal.Some modification and technical knowledge may be required for installation.

£22.00

FEATURES: •Airsoft stainless steel 6.02mm Inner Barrel. •Essential part for upgrading your airsoft AEG. •Stainless steel made tightbore upgrade barrel. •6.03mm precision inner airsoft rifle barrel. •Perfect for tighter grouping & more accurate shooting. •Increases FPS for higher velocityBuilt for extra power and precision shooting. •Length: 247mm . •Compatibility: All Marui Compatible AEG that use [...]

Airsoft Stocks & Handguards

ZCI Airsoft M4 LE adjustable stock

£15.00

ZCI Airsoft M4 carbine LE adjustable stock Fits airsoft spec stock tubes Maybe one of the most famous and well known M4 carbine stocks used by many military and police units around the world

£23.00

FEATURES: •Airsoft stainless steel 6.02mm Inner Barrel. •Essential part for upgrading your airsoft AEG. •Stainless steel made tightbore upgrade barrel. •6.03mm precision inner airsoft rifle barrel. •Perfect for tighter grouping & more accurate shooting. •Increases FPS for higher velocityBuilt for extra power and precision shooting. •Length: 247mm . •Compatibility: All Marui Compatible AEG that use [...]

Tune up kits and gear sets

ZCI 18:1 Steel Standard Ratio Gearset

£22.00

Our sintered steel standard 18:1 ratio gear-set which is a nice inexpensive way to replace an old gear-set for a usual gearbox service. Some modification and technical knowledge may be required for installation.

£13.00

ZCI CNC Aluminium trigger and bar for Marui Hi Capa series (Black) Replacement, black aluminium trigger bar and trigger for Tokyo Marui Hi Capa series GBB pistol

£25.00

ZCI M16 Solid stock with battery compartment Fits on most M4 / M16 receivers Storage section for Large battery Sling Loop Includes screw

£10.00

ZCI Steel Hi Capa Replacement external hammer (Black) Replacement Steel external hammer for the Tokyo Marui Hi Capa series pistol. Direct replacement.

Hop units and rubbers

ZCI M4 / M16 CNC Rotary Hop unit

£28.00

ZCI M4 / M16 Rotary Hop unit similar to the prowin but fully CNC manufactured to fine-tuning and increase accuracy

£17.00

ZCI CNC Aluminium magazine release set for Marui Hi Capa Replacement magazine release button set for the Tokyo Marui Hi Capa series pistol. Set includes the mag release button, spring and tension rod.

£16.00

ZCI Steel grip safety lever for Marui Hi Capa series Replacement grip safety lever for Tokyo Marui Hi Capa series. Made of steel.

zci-logo

AEG Internal Upgrade Parts

Their AEG upgrade parts are mostly machined out of high-grade aluminium and some products with aircraft-grade aluminium to provide the best performance and reliability for a great price. Their AEG parts include any internal parts for version 2 and 3 gearboxes including piston heads, cylinder heads, cylinders, high torque & high-speed motors, gearsets ranging from 32:1 ratio to 13:1, bushings, bearings, shim sets and many more.

Replacement Tokyo Marui Pistol Parts

ZCI are constantly increasing their catalogue of replacement and upgrade pistol parts, mainly for the Tokyo Marui Hi Capa series. These are a great alternative if you can’t find the original parts anywhere and want to replace it with something a lot stronger.

Whether it’s a hop unit, new fill valve or external parts prone to break, ZCI offers the parts which often break or get lost on the original pistol.

Airsoft Gun Accessories

ZCI also offer a large range of tactical accessories, spare magazines, Moscarts, rifle stocks & stock tubes and even rail systems for M4 and HK416 platform AEGs. Browse our range of Keymod rail systems and choose whether you want a full rail set or no rails to come with it.

Browse our full range of ZCI products and keep checking back for more products being added all the time.

Can’t find what you’re looking for? Not a problem, get in touch with us and we’ll see if we can order it in for you.