How To Use And Program Your IMAX Charger

In this tutorial we show you how to set up, initiate and program your IMAX charger for charging your Airsoft NiMh, LiPo and LiFe batteries. after the first couple of times it gets easier and eventually the process sticks. It is important that you charge you LiPo and LiFe batteries in a LiPo safe bag.

The IMAX can detect when your battery is faulty, getting too hot and cuts of & alerts you when an error occurs.

Both the IMAX and the Turnigy chargers operate similarly and haven’t found a better operating system out there that’s this easy!

For any of your airsoft needs visit:

Battery checkers and accessories

Fire proof Lipo safety charge bag Small (23x18cm)


Fire proof Lipo safety charge bag Small (23x18cm) Use to store and charge your LiPos safely in a fireproof bag, just in case the worst happens. Available in two sizes.


Vapex 700mA charger for LiPo/LiFe batteries (1-3 cell) Standard charger for LiPo or LiFe batteries with a 700mA charging output. Easy to read instuctions and indicating lights displayed to show you the status of your battery. Supplied with a UK 3 pin plug.


Vapex 500mA NiMh Smart Charger This Charger is designed to charge Nickel-Metal Hydride or Nickel Cadmium 4~10 Cells battery packs with Standard Tamiya Male Connector. This is a Smart Charger, which can distinguish 4~10 cells pack by MPU inside Automatically and cut-off the charging accordingly. It is easy to use. Manual-adjustment is not needed. By [...]

Battery checkers and accessories

Simple voltage display 1-6s LiPo voltage meter


Simple voltage display 1-6s LiPo voltage meter Simply plug your LiPo in and the display shows the total voltage and the individual voltage of each cell.