King Arms PDW 5.56mm SBR SD – Dark Earth
The King Arms PDW 5.56mm SBR SD is a lightweight and modern looking pdw.
The body is built from strong and lightweight polymer and the barrel is metal. The hand guard is M-LOK and comes with three pieces of rail in the box. You can attach a torch, laser, grenade launcher or pistol grip using the rails or you can just attach M-LOK accessories straight to the handguard. The full length top rail is ideal for attaching sights and PEQ boxes to. It also comes with a set of flip up sights. The gun runs off M4 magazines and comes with a 140 round mid capacity magazine. The 5.56mm SBR SD has an adjustable hop unit. The gun has an enlarged M4 style magazine release on the right side. The SBR SD comes with a mock supressor, which gives it a special forces look and also means that a longer inner barrel is run through it.
The gun has three firing modes, which are safe, single and full auto. The fire selector is located on the left above the pistol grip. The pistol grip can have its size adjusted using different inserts that come with the gun. The stock has 7 adjustable positions and can be removed to access the stock tube where the battery is stored.
The gun will run off either a 7.4v lipo or a 9.6v nimh. To install the battery you take the stock off and remove the end cap of the stock tube. Inside you will find the battery connector. You connect the battery and place it inside the stock tube and then replace the end cap and stock.
The gun is very well suited to CQB style enviroments but can still be used out in larger sites without much issue. This would make a good gun for a new player to airsoft or a veteran airsofter.
Specifications
- Polymer body
- Mock supressor
- Full length top rail
- M-LOK rail system with three rails
- Basic mosfet trigger unit
- Adjustable hop unit
- Quick change spring system
- Adjustable pistol grip
- Adjustable stock
- Firing modes: safe/single/full auto
- Runs off 9.6v nimh or 7.4v lipo
- FPS: 330
- Inner barrel length: 305mm
- Length: 662mm (stock collapsed) / 722mm (stock extended)
- Weight: 2005g