King Arms PDW 9mm SBR Long – Black & Blue
The King Arms PDW 9mm SBR long is a modern looking PDW with plenty of rail space for attachments.
The body is built from strong and lightweight polymer and the barrel is metal. The hand guard is fully railed so you can attach a torch, laser, grenade launcher or pistol grip using the rails. The full length top rail is ideal for attaching sights and PEQ boxes to. It also comes with a set of flip up sights. The gun runs off MP5 magazines and comes with a 100 round mid capacity magazine. The 9mm SBR long has an adjustable hop unit. The gun has an enlarged M4 style magazine release on the right side and an MP5 style magazine release underneath, so you have a choice on what way to release the magazine.
The gun has three firing modes, which are safe, single and full auto. The fire selector is located on the left above the pistol grip. The pistol grip can have its size adjusted using different inserts that come with the gun. The stock has 7 adjustable positions and can be removed to access the stock tube where the battery is stored.
The gun will run off either a 7.4v lipo or a 9.6v nimh. To install the battery you take the stock off and remove the end cap of the stock tube. Inside you will find the battery connector. You connect the battery and place it inside the stock tube and then replace the end cap and stock.
The gun is good for use both in CQB and outdoor sites. This would make a good gun for a new player to airsoft.
- Polymer body
- Full length top rail
- Railed hand guard
- Basic mosfet trigger unit
- Adjustable hop unit
- Quick change spring system
- Adjustable pistol grip
- Adjustable stock
- Firing modes: safe/single/full auto
- Runs off 9.6v nimh or 7.4v lipo
- FPS: 330
- Inner barrel length: 195mm
- Length: 621mm (stock collapsed) / 718mm (stock extended)
- Weight: 1920g