Maxx CNC Aluminium Hop Chamber – M4P Pro

£70.00

The new 2022 release of the Maxx M4A CNC hop up chamber.

Out of stock

Email when stock available

icon Description

Maxx CNC Aluminium Hop Chamber – M4P Pro

CNC Aluminum Hopup Chamber M4P Pro (with BB Latching System) unit is precisely machined to perform accurately and consistently with HPA PolarStar Engines on standard M4/M16 platform.
The Hopup Chamber M4P unit is built with an aluminium Rotary Dial Knob for fine hopup adjustments, the precision Hopup Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot.
The Hopup Chamber M4P unit is designed to accept the HPA PolarStar Engine M4 nozzle length and is fully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use.
The Hopup Chamber M4P unit is wisely equipped with an interchangeable Inlet Adaptor OD11mm to ensure the hop up unit is inserted exactly in the centre of the 11mm inner bore HPA Engine nozzle outlet without wobbling. (Inlet Adaptor OD11.5mm and OD12mm are optional)
Also mounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slots, and included an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting.
More than that, the Hopup Chamber M4P Pro unit is specially designed with a new BB Latching System to prevent BB from dropping after removing the magazine. The Latching Arm can also be manually pressed to release the remaining BB inside the hop-up chamber.

***The Dual UV LED Tracer Module is an add-on option to glow BB in the dark. Operating Voltage from 7VDC – 15VDC (2-4 cells LiPo, 6-13 cells NiCad). (Sold separately)
***Test results: FPS might be increased from 10FPS to 30FPS over the stock setup. Please check your FPS!

 

Includes
Maxx CNC Aluminium Hop Chamber - M4P Pro 1 x CNC Aluminum Hopup Chamber M4P Pro (with BB Latching System) unit
Maxx CNC Aluminium Hop Chamber - M4P Pro 2 x CNC Acrylic Side Cover
Maxx CNC Aluminium Hop Chamber - M4P Pro 2 x CNC Brass 2.5mm Side Wing
Maxx CNC Aluminium Hop Chamber - M4P Pro 1 x CNC Steel Pivot Pin
Maxx CNC Aluminium Hop Chamber - M4P Pro 1 x CNC Aluminum Hopup Lever
Maxx CNC Aluminium Hop Chamber - M4P Pro 1 x CNC Aluminum Soft Round Nub
Maxx CNC Aluminium Hop Chamber - M4P Pro 1 x CNC Aluminum Soft Flat Nub (4mm)
Maxx CNC Aluminium Hop Chamber - M4P Pro 1 x CNC Aluminum Hard Concave Nub (4mm)
Maxx CNC Aluminium Hop Chamber - M4P Pro 3 x Steel Nub Spring
Maxx CNC Aluminium Hop Chamber - M4P Pro 1 x CNC Steel Spring Guide
Maxx CNC Aluminium Hop Chamber - M4P Pro 1 x Steel Upper Compression Spring
Maxx CNC Aluminium Hop Chamber - M4P Pro 1 x Steel Center Compression Spring
Maxx CNC Aluminium Hop Chamber - M4P Pro 1 x CNC Delrin Locking C-Clip
Maxx CNC Aluminium Hop Chamber - M4P Pro 1 x CNC Brass Barrel Spacer
Maxx CNC Aluminium Hop Chamber - M4P Pro 1 x Brass Barrel Spacer Holder Oring
Maxx CNC Aluminium Hop Chamber - M4P Pro 1 x CNC Aluminum Rotary Dial Knob
Maxx CNC Aluminium Hop Chamber - M4P Pro 1 x CNC Aluminum Inlet Adaptor (OD11mm)

 

Specification
Maxx CNC Aluminium Hop Chamber - M4P Pro Overall Length: 51.15mm
Maxx CNC Aluminium Hop Chamber - M4P Pro Overall Height: 37.75mm
Maxx CNC Aluminium Hop Chamber - M4P Pro Inlet Adaptor Outer Diameter (to fit into HPA Nozzle Outlet): 11mm
Maxx CNC Aluminium Hop Chamber - M4P Pro Hub Outer Diameter (to fit into Outer Barrel): 12mm
Maxx CNC Aluminium Hop Chamber - M4P Pro Hub Inner Diameter (to fit Nozzle): 8mm
Maxx CNC Aluminium Hop Chamber - M4P Pro Feeder Outer Diameter (to fit magazine): 8.85mm
Maxx CNC Aluminium Hop Chamber - M4P Pro Feeder Length (to fit magazine): 6mm
Maxx CNC Aluminium Hop Chamber - M4P Pro Material: Aluminum 6061

 

Features
Maxx CNC Aluminium Hop Chamber - M4P Pro Machined from a solid aircraft aluminium block with tight tolerances to achieve the most accuracy, consistency, and durability
Maxx CNC Aluminium Hop Chamber - M4P Pro Performed accurately and consistently with HPA PolarStar Engines on standard M4/M16 platform
Maxx CNC Aluminium Hop Chamber - M4P Pro Precision Rotary Dial Knob for fine hopup adjustments
Maxx CNC Aluminium Hop Chamber - M4P Pro Re-engineered the precision Hopup Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot
Maxx CNC Aluminium Hop Chamber - M4P Pro Removable Steel Pivot Pin for ease of setup and maintenance
Maxx CNC Aluminium Hop Chamber - M4P Pro Accepted the HPA PolarStar Engine M4 nozzle length
Maxx CNC Aluminium Hop Chamber - M4P Pro Fully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use
Maxx CNC Aluminium Hop Chamber - M4P Pro Wisely equipped with an interchangeable Inlet Adaptor OD11mm to ensure the hop up unit is inserted exactly in the centre of the 11mm inner bore HPA Engine nozzle outlet without wobbling. (Inlet Adaptor OD11.5mm and OD12mm are sold separately)
Maxx CNC Aluminium Hop Chamber - M4P Pro Mounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slots
Maxx CNC Aluminium Hop Chamber - M4P Pro Included an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting
Maxx CNC Aluminium Hop Chamber - M4P Pro Equipped with 2 compression springs on top and centre to ensure the hop up unit is seated straight and air-tight during use
Maxx CNC Aluminium Hop Chamber - M4P Pro Specially designed with a new BB Latching System to prevent BB from dropping after removing the magazine
Maxx CNC Aluminium Hop Chamber - M4P Pro The Latching Arm can also be manually pressed to release the remaining BB from inside the hop up chamber
Maxx CNC Aluminium Hop Chamber - M4P Pro Compatible with any 11mm inner bore HPA Engine nozzle outlets
Maxx CNC Aluminium Hop Chamber - M4P Pro The Dual UV LED Tracer Module to glow BB in the dark ready!

 

Weight
Maxx CNC Aluminium Hop Chamber - M4P Pro N/A grams

 

Usage
Maxx CNC Aluminium Hop Chamber - M4P Pro Compatible with most HPA PolarStar Engines on standard M4/M16 platform

 

Requires
Maxx CNC Aluminium Hop Chamber - M4P Pro Wearing eye protection is recommended
Maxx CNC Aluminium Hop Chamber - M4P Pro Use proper tools for disassembly and reassembly the gearbox with great care due to spring tension
Maxx CNC Aluminium Hop Chamber - M4P Pro Bearing lubricant oil/grease is recommended for smooth operation

 

Instruction
Maxx CNC Aluminium Hop Chamber - M4P Pro Instruction Manuals are included
icon Brand

MAXX Model

maxx-model-logo

MAXX Model

Our selection of MAXX Model Airsoft upgrade parts are fantastic for increasing the performance of your weapon. From advanced triggers to hop up units and more, take a look at what we have to offer!
icon     Interest Free Finance Available 0% APR finance available on orders over £30

Paypal Pay in 3 

Socom Tactical are pleased to announce we are able to offer 0% interest-free finance on all orders to Paypal customers

For full information please check out our finance page

Choose Pay in 3 at checkout where PayPal is available, and enjoy the power to split your purchase into three interest-free payments, with no set up fees or charges.* It’s a great way to help you stay in control of your budget.
paypal pay in 3 Pay in 3: Easy as 1-2-3…
  1. Check out with Paypal
  2. Choose “Pay in 3” and complete your order
  3. Make the first payment now, the rest in two payments every month on the same date.
 
icon    Delivery Times and Costs View our Delivery Times and Costs

At Socom Tactical we aim to ship all orders same working Day During our working hours. All orders before 14:00 we aim to ship the same day. Shipments are shipped Monday, Wednesday, Thursday, Friday sadly due to no collections we are unable to ship Saturdays.

Pricing and Times

UK Mainland   £6 or Free on orders over £100

Europe   £10 - Delivery 3-7 working days (Excluding any customs delays)

Rest of the World   4- 14 Working Days (Excluding any customs delays)

Additional Time There May / Will be additional delays for Remote UK, Highlands and Islands, as well as Northern Ireland typically this, adds an additional 1-2 working day

UK Shipping Methods -   Typically most orders over £30 or 1kg are sent via DPD local Next Working Day delivery. You will receive an email and/or Text message from DPD with a 2-hour delivery window. Packages under 1kg or £30 will be shipped by Royal Mail First Class Tracking number can be viewed on your account

EAN: N/A Category: