MAXX Model M4 CNC Aluminum Hopup Chamber ME – SPORT w/ Tracer

£69.00

In stock

icon Description

MAXX Model CNC Aluminum Hopup Chamber ME – SPORT w/ Tracer

Fits most m4s excluding ICS

CNC Aluminum Hopup Chamber ME Sport (with BB Catching System) & UV LED Tracer unit is precisely made to improve accuracy and ensure consistent air seal for Tokyo Marui (include KRYTAC and KWA) M4/M16 Standard AEG series.
The Hopup Chamber ME unit has a precision rotary dial design for fine hopup adjustments, also re-engineered the hopup levers and concave nubs to work best with R-hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot.

The Hopup Chamber ME unit is designed to accept the nozzle length from 21.00mm to 21.25mm, and fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs.

The Hopup Chamber ME Housing is equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting, and 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight at all times when adapted to any V2 gear boxes with 11mm or 11.5mm inner bore.

More than that, the Hopup Chamber ME Sport unit is specially designed with BB Catching System to prevent dropping BBs after removing the magazine.
The Dual UV LED Boards and Module set is also included with this hopup chamber unit to glow BBs in the dark. Operating Voltage from 7VDC – 15VDC (2-4 cells LiPo, 6-13 cells NiCad).

***The Empty Magazine Detection Sensor and Electronic Switch Controller are optional add-ons to stop Motor/HPA firing when the magazine is empty. (Sold separately)
***Test results: FPS might be increased from 10FPS to 30FPS over stock setup. Please check your FPS!

Includes

1 x CNC Aluminum Hopup Chamber ME Sport (with BB Catching System) unit

1 x Dual UV LED Boards and Module set

2 x Strong Clear Vinyl Cover set

1 x CNC Aluminum Standard-Hop Arm

1 x CNC Aluminum R-Hop Arm

1 x Silicone Rubber Standard-Hop Nub Damper

1 x Silicone Rubber R-Hop Nub Damper

1 x CNC Aluminum 4.5mm length Precision R-Hop Concave Nub

1 x CNC Aluminum 6mm length Precision R-Hop Concave Nub

1 x CNC Brass Threaded Slot Pin

1 x CNC Delrin Locking C-Clip

1 x CNC Barrel Brass Spacer

1 x Brass Spacer Holder Oring

3 x Steel Compression Spring

Specification

Overall Length: 51mm

Overall Height: 37.75mm

Hub Outer Diameter (to fit into Gear Box): min 11mm – max 11.5mm

Hub Outer Diameter (to fit into Outer Barrel): min 12mm

Hub Inner Diameter (to fit Nozzle): max 8.3mm

Feeder Outer Diameter (to fit magazine): min 9.25mm

Feeder Length (to fit magazine): max 6.25mm

Material: Aluminum 6061


Features


Machined from a solid aircraft aluminium block with tight tolerances to provide better accuracy, consistency, and durability

Improved accuracy and ensure consistent air seal for Tokyo Marui (include KRYTAC and KWA) M4/M16 Standard AEG series

Precision rotary dial design for fine hopup adjustments

Re-engineered the hopup levers and concave nubs to work best with R-hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot

Removable Brass Threaded Slot Pin for setup and maintenance

Accepted the nozzle length from 21.00mm to 21.25mm

Fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs

Equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting

Equipped with 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and airtight

Compatible with any V2 gear boxes with 11mm or 11.5mm bore

Specially designed with BB Catching System to prevent dropping BBs after removing the magazine

Included the Dual UV LED Boards and Module set to glow BBs in the dark.
Operating Voltage from 7VDC – 15VDC (2-4 cells LiPo, 6-13 cells NiCad)

The Empty Magazine Detection Sensor to stop Motor/HPA firing ready!

Usage

Compatible with most Tokyo Marui (include KRYTAC and KWA) M4/M16 standard AEG version 2 gearbox

Requires

Wearing eye protection is recommended

Use proper tools for disassembly and reassembly the gear box with great care due to spring tension

Bearing lubricant oil/grease is recommended for smooth operation

Instruction

Instruction Manuals are included

icon Brand

MAXX Model

icon     Interest Free Finance Available 0% APR finance available for orders over £300.00

Interest Free Is currently Unavalibale 

 

Socom Tactical are pleased to announce we are able to offer 0% interest-free finance on all orders over £300 with as little as 10% deposit. Subject to approval and credit check.

For full information please check out our finance page

Simply add your items to your cart online on check out if your order meets criteria you will have the option for finance Simply follow the onsite instructions and an instant decision. 10% deposit can either be paid by the link emailed to you or we will call you for deposit payment. Orders can not be processed until the deposit has been paid.

You will only be considered for finance if you:

  • Are at least 18 years old

 

  • You're in paid employment or have a regular income (minimum 16 hours per week or £5,000 per annum, unless you are retired and receiving a private / company pension or in receipt of disability allowance)

 

  • Are a permanent UK resident and have lived in the UK for at least 3 years.

 

  • Have a UK bank account capable of accepting Direct Debits.

 

  • Have a good credit history with no late payments, debt relief orders, County Court Judgment (CCJs), Individual Voluntary Arrangement (IVAs) or bankruptcies.

 

  • Provide an email address so your documentation can be emailed to you.

 

icon    Delivery Times and Costs View our Delivery Times and Costs

At Socom Tactical we aim to ship all orders same working Day During our working hours. All orders before 14:00 we aim to ship the same day. Shipments are shipped Monday, Wednesday, Thursday, Friday sadly due to no collections we are unable to ship Saturdays.

Pricing and Times

UK Mainland   £6 or Free on orders over £100

Europe   £10 - Delivery 3-7 working days (Excluding any customs delays)

Rest of the World   4- 14 Working Days (Excluding any customs delays)

Additional Time There May / Will be additional delays for Remote UK, Highlands and Islands, as well as Northern Ireland typically this, adds an additional 1-2 working day

UK Shipping Methods -   Typically most orders over £30 or 1kg are sent via DPD local Next Working Day delivery. You will receive an email and/or Text message from DPD with a 2-hour delivery window. Packages under 1kg or £30 will be shipped by Royal Mail First Class Tracking number can be viewed on your account

EAN: 5051160182490 Category: