online@socomtactical.net

01252 616868

Airsoft Retailer in the Uk, Socom Tactical Airsoft selling airsoft guns airsoft bbs ammo assault vests and airsoft clothing and equipment

Specna Arms SA-G02 M16 Carbine with m203 - Black (ASCU)
[0]

£
£440.00
  In Stock

Available Options:

Comment Box :
 
Type:
 
Ukara no :

Quantity



UKARA OR SITE MEMBERSHIP NUMBER NEEDED TO BUY THIS GUN IF YOU ARE UNABLE TO PROVIDE THIS WE CAN ONLY SEND A TWO TONE GUN. SA-G01 carbine replica

The Specna Arms brand SA-G01carbine replica made predominantly of an homogeneous alloy of zinc and aluminum with the use of steel elements in the most neuralgic points of the replica ( the screws, the pins and the tactical sling attachment points are made of steel ). The SF type stock which holds the battery and the pistol grip were made of polymer plastic. The replica’s body, the RIS rail set were a subject to the process of anodizing what guaranties a high level of protecting the replica against corrosion. The paint job of the replica itself was made using the pulverization method after a previous sandblasting of the replica’s surface. This ensures the paint’s higher, than usually, durability against abrasion. The replica’s body beads the USMC markings.

The replica was fitted very well – in a way that it was previously observable only in the G&P or Classic Army class replicas. It was also perfectly balanced. This ensures a perfect maneuverability of the replica while as its weight is almost not felt when you place the replica on the shoulder.

The replica uses a quick main spring exchange system, the so-called Enter & Convert™. This allows for a quick and fluent adaptation of the replica’s power to the conditions of the battlefield without the need of having access to a workshop or a number of specialist tools – when you take the gearbox out the replica’s body, the process of exchanging the main spring takes literally seconds.

The advantages of the Enter & Convert™ system are hard to overestimate. In the light of the laws existing in Europe and which limit the muzzle velocity of the replica and the establishments inside the airsoft society, this system guaranties the user great possibilities and more liberty. The Enter & Convert™ system allows to change the main spring in little amount of time, and, what is followed by this, adapted the muzzle velocity of the replica to the battlefield so it guaranties a perfect compromise between effectiveness of firing and the safety of your own and other players.

The replica was fully adapted to cooperate with LiPo and LiFe type batteries. Thanks to the basic muzzle velocity of about 410 FPS which is guaranteed by the default main spring, the replica is perfect to be used in middle distances. The set also includes an M90 main spring which allows to decrease the muzzle velocity to about 310 FPS making the replica perfectly adapted for short range operations or fighting inside buildings.

The gearbox which is reinforced on the height of the cylinder’s head hides a steel main spring guide which is the element of the Enter & Convert™ system and also 8mm ball bearings and steel thread-wheels which are placed on spacers. The system is secured with the use of four anti-reversals. The Lekki, polycarbonate piston is equipped with a steel tooth in order to increase its durability. There is a type 2 cylinder and the steel breaker and a metal metal hop-up chamber applied in this replica.

The replica is equipped with a top 22mm RIS rail, a set of front 22mm RIS rails and an adjustable stock. The top RIS rail holds the flip-up type iron aiming sights which can be easily detached and replaced with any optical-electronic aiming devices. Thanks to the collapsible stock which is ended with a anti-skid stock’s foot, it is possible to adapt the replica’s length to the built and the preferences of the shooter. The default muzzle flash-hider is placed on a 14mm counter-clockwise thread what allows the attachment of a sound suppressor in its place.

In order to increase the realism level, the replica was equipped with a functional bolt catch lever. The replica is also equipped with a 40mm grenade launcher which is fed by green-gas grenades.
The replica set also includes a steel hi-cap type magazine which holds 300 BB pellets.
The set includes:

- the M16 203

- a magazine - the iron aiming sights
- an additional main spring
- a battery
- a charger
-40 mm grenade-launcher

Additional accessories shown in photographs are not included in the kit! The ASCU is a two-part electronic module ( the control module and the sensor module ) which, upon being installed in the Airsoft replicas, significantly improve their operation. The traditional joint module was replaced with a sensor module which monitors the actual position of the piston thread-wheel, the firing mode selector lever and the trigger. The gathered information is sent to the control module – in which the software located in the processor analyzes it and controls the replica’s motor with the use of the MOSFET active break.

ASCU Gen. 4 includes the following upgrades:

1. New MosFet transistors with 16 times less resistance, resulting in to faster cycle, better active brake, more shots per battery charge and less heat.
2. New very strong trigger switch.
3. New reinforced design with full polymer encasing.
4. Better short-circuit protection.
5. Easier installation.
6. Updated software with easier programing (accidental hop-up program activation is impossible).
7. Improved cut-off lever.
8. Improved selector plate.
9. Fits all standard and reinforced version 2 gearboxes.

The ASCU improves the operation of a V.3 gearbox and makes that the replica equals the more expensive replicas and the more sophisticated PTW class replicas. The ASCU system monitors the operation of the replica no matter the speed of squeezing the trigger and is responsible for the full cycle of the piston’s operation, both in the semi-automatic and full automatic firing modes. The piston stops in the starting position after each shot.

The ASCU is equipped with the Low Drain Protection system which is specially designed to secure the lithium-polymer (LiPo) batteries from being damaged.

In case of any emergency, the ASCU stops the firing mode in the replica and, therefore, secures the inner elements from further damage.

The ASCU is easy to install in the replica which is equipped in the V.2 gearbox. Most of the models does not require the modification of the airsoft rifle’s original parts. Yet, in some cases, some minor changes may have to be introduced – thanks to this the installation process will be completed without any problems.

The set includes:

- 1x RIF
- A magazine
- Iron sights
- Additional main spring
- A battery
- A charger (We advise buying a upgraded Smart charger)

Name :Specna Arms SA-B03 carbine - Half-Tan (ASCU Gen.4 version)
Manufacturer: Specna Arms
Warranty: 12 months
Velocity [FPS]: ~400 / ~310
Gearbox version: Modified v2 Gearbox
Type of fire: Single, auto
Length: 840 - 920 mm
Battery Capacity [mAh]: 1100
Magazine type: Hi-Cap magazine
Magazine capacity [pcs]: 300
Hop-Up: Yes, adjustable
Blow Back: No
Made of: ZnAl + steel + plastic
Battery included: Ni-MH
Battery Voltage [V]: 9,6

Before ordering please make sure you read our terms and conditions Over 18s only and UKARA or site membership required please refer to our Conditions of Use on the left hand side of this page.

Buy this item and earn 367 points valued at £7.33.

There are no reviews for this product.

Write Review


Socom Tactical - Airsoft Shop UK Rated 4.5/5 based on 402 Facebook reviews