6 Shooters

Showing 1–21 of 36 results

6 Shooters Airsoft is a UK company which started in 2018. The majority of the products are designed and 3D printed by a small team of people in Hampshire and always have new products in the pipeline. 

If there’s one clue in the company name, it’s that revolvers are the primary focus to most products, one in particular, the ASG Dan Wesson 715

Other popular ranges from 6 Shooters include Rhino and H8R.6 Shooters also do other 3D printed grips and accessories for other pistols too like the Sig sauer P226, Beretta M9A3 and more. Check out the 6 Shooters website to see what else they have on offer!

Read more >>

Showing 1–21 of 36 results

£9.00

6 Shooters Hexshot V2 for Wingun/Dan Wesson Revolvers (Low Power) Introducing the 2nd version of the Hexshot for Dan Wesson, Wingun and GunHeaven revolvers. The main body of the Hexshot is still a strong, solid plastic, but the tips are made from a hard rubber material to hugely increase air seal and consistency compared to [...]

£9.00

6 Shooters Hexshot V2 for Wingun/Dan Wesson Revolvers (High Power) Introducing the 2nd version of the Hexshot for Dan Wesson, Wingun and GunHeaven revolvers. The main body of the Hexshot is still a strong, solid plastic, but the tips are made from a hard rubber material to hugely increase air seal and consistency compared to [...]

Every thing else and electrical

6 Shooters Barrel Spacer For FMA Suppressor

£5.00

A 3D printed barrel spacer designed to fit inside the FMA 198mm suppressors and make sure your extended inner barrel sits central and reduces any wobble.

£9.00

A set of six low powered revolver shells for the ASG Schofield CO2 revolver. These lower the power output to allow for a skirmishable FPS

£9.00

Multishot revolver shell group by 6 Shooters Airsoft. Turn your airsoft revolver into a short-range shotgun

£9.00

A set of two molle mounted disk holders for the Elite Force H8R CO2 revolver

£8.00

6 Shooters Pyro Strike 20mm Rail Mount – 32mm The rail cover strike pads are designed to make sure you never have a pyro fail on you. The adhesive paper supplied is coated with the same material as what you would find on an Enola Gaye MK5 thunderflash. Each rail cover comes with four adhesive [...]

£8.00

A double molle mounted disk holder for the Elite Force H8R CO2 revolver

£11.00

6 Shooters Pyro Strike 20mm Rail Mount – 100mm The rail cover strike pads are designed to make sure you never have a pyro fail on you. The adhesive The rail cover strike pads are designed to make sure you never have a pyro fail on you. The adhesive paper supplied is coated with the [...]

£3.50

6 Shooters Pyro Strike Rail 32mm Sticker Pack (6) Replacement sticker pack for the 6 Shooters Airsoft short 20mm pyro strike rail mount. This pack contains six stickers and is sized for the smaller 32mm rail cover.   Features Adhesive backed Pack of six stickers 32mm long Warning: Store in a dry, sealed bag or [...]

£2.50

1.5mm Fibre optic rod for airsoft pistol iron sights with a length of 30mm per rod so you can cut them down to a specific size

£4.00

6 Shooters Pyro Strike Rail 100mm Sticker Pack (6) Replacement sticker pack for the 6 Shooters Airsoft long 20mm pyro strike rail mount. This pack contains six stickers and is sized for the longer 100mm rail cover.   Features Adhesive backed Pack of six stickers 100mm long Warning: Store in a dry, sealed bag or [...]

£8.00

6 Shooters Pyro Strike Velcro Tab – Small These little strike pads are suitable for anything with a velcro loop available. Ideal for sticking on your sleeve or vest next to a patch, but we recommend removing it from clothing before striking any pyro onto it. If you can’t find anything to attach it to, [...]

£10.00

6 Shooters Pyro Strike Velcro Tab – Large These little strike pads are suitable for anything with a velcro loop available. Ideal for sticking on your sleeve or vest next to a patch, but we recommend removing it from clothing before striking any pyro onto it. If you can’t find anything to attach it to, [...]

£2.50

2.5mm Fibre optic rod for airsoft rifle iron sights with a length of 30mm per rod so you can cut them down to a specific size

£4.00

6 Shooters Pyro Strike Tab Small Sticker Pack (6) Replacement sticker pack for the 6 Shooters Airsoft small velcro pyro strike tab. This pack contains six stickers and is sized for the smaller 40mm tab.   Features Adhesive backed Pack of six stickers 40mm x 21mm stickers Warning: Store in a dry, sealed bag or [...]

£5.00

Great for an airsoft tech orAK user, the replacement AK hop placement block for Cyma, LCT, E&L and more

£7.00

6 Shooters sight RIS rail for Dan Wesson 715 20mm red dot sight rail for the ASG Dan Wesson 715 series revolvers. Add this compact rail to your 715 revolver to attach any of your red dot sights, scopes or anything else that mounts to a rail. Ideal for small doctor sights. The installation is [...]

£4.00

6 Shooters Pyro Strike Tab Large Sticker Pack (6) Replacement sticker pack for the 6 Shooters Airsoft large velcro pyro strike tab. This pack contains six stickers and is sized for the larger 64mm tab.   Features Adhesive backed Pack of six stickers 60mm x 34mm stickers Warning: Store in a dry, sealed bag or [...]

£8.00

A pistol mag pouch insert for airsoft AEP magazine that holds two at a time

£9.00

A great replacement for fiddly and loose revolver shells, the Hexshot is designed for easy reloading and controlled FPS.

Dan Wesson/Wingun Accessories

Dan Wesson pistols are some of the most iconic revolvers on the market, and for good reason. These workhorse guns are known for their durability, accuracy and versatility, making them a popular choice for target shooters. 

In addition to the legendary 715 revolver, we also stock a range of Dan Wesson/Wingun accessories, including sight rails, shells, holsters and clips. 

Whether you’re looking to upgrade your existing gun or build a custom setup from scratch, we have everything you need to get the job done right. So check out our selection of Dan Wesson pistols and accessories today –  you won’t be disappointed!

Chiappa Rhino

The Rhino 50DS is a top-of-the-line airsoft revolver that can be used for both recreation and competition airsoft matches.

It’s made with a full metal body and frame, making it durable and realistic in appearance and feel. The grip is textured for a comfortable and secure hold, even when wearing gloves. And the sight rails allow you to add various optics for better accuracy.

The revolver comes with six hex shot shells, each of which holds one round of 6mm BBs. It also has a CO2 powerlet that provides up to 50 shots before needing to be replaced. 

The Rhino 50DS Revolver is a great choice for serious airsoft players who want a high-quality revolver that will give them an edge on the field.

Elite Force H8R Revolver

Whether you’re a beginner or a seasoned airsoft player, we have the perfect revolver for you in our Elite Force H8R Airsoft Revolver. 

This piece is perfect for those who want to add a little more realism to their game, and comes with a number of accessories to make your battle a winning one! 

We also stock a range of H8R accessories from magazine discs and holsters to adapters, so you can customise your revolver to suit your playing style. With our wide range of airsoft products, you’re sure to find the perfect airsoft revolver for your next battle!