Perun

Showing all 11 results

Showing all 11 results

£9.00

Perun NOZZ-X Base (Adjustable Air Nozzle ) Nozz-X is a modular, adjustable length nozzle system, which allows you to achieve a perfect seal and reliable BB feeding. Nozz-X nozzle is made of two parts which are sold separately: 1. Universal base. Two o-rings with different thickness are included with each base, so that you can [...]

£5.50

Perun Nozz-X end Small Chamfer 19-23mm Designed to work with and requires Nozz-X base one of four available. Tips are offered in two lengths which allow your nozzle to be between 19 and 23mm or 22,5 and 26,5mm long. Both lengths are available with small or large chamfers (less or more sloped edges). Each combination [...]

£5.50

Perun Nozz-X end Large Chamfer 19-23mm Designed to work with and requires Nozz-X base one of four available. Tips are offered in two lengths which allow your nozzle to be between 19 and 23mm or 22,5 and 26,5mm long. Both lengths are available with small or large chamfers (less or more sloped edges). Each combination [...]

£5.50

Perun Nozz-X end Small Chamfer 22.5-26.5mm Designed to work with and requires Nozz-X base one of four available. Tips are offered in two lengths which allow your nozzle to be between 19 and 23mm or 22,5 and 26,5mm long. Both lengths are available with small or large chamfers (less or more sloped edges). Each combination [...]

£5.50

Perun Nozz-X end Large Chamfer 22.5-26.5mm Designed to work with and requires Nozz-X base one of four available. Tips are offered in two lengths which allow your nozzle to be between 19 and 23mm or 22,5 and 26,5mm long. Both lengths are available with small or large chamfers (less or more sloped edges). Each combination [...]

£75.00

Perun V2 Optical is a device that replaces mechanical contacts in version 2 gearboxes with an electronic circuit based on MOSFET transistors and adds a multitude of new functions to your replica. Elimination of mechanical contacts solves the problem of their gradual wear. MOSFET transistors utilized in Perun V2 have a much lower resistance than [...]

£75.00

Perun V2 Optical is a device that replaces mechanical contacts in version 2 gearboxes with an electronic circuit based on MOSFET transistors and adds a multitude of new functions to your replica. Elimination of mechanical contacts solves the problem of their gradual wear. MOSFET transistors utilized in Perun V2 have a much lower resistance than [...]

Airsoft Mosfets

Perun G&G ETU Upgrade kit

£49.99

G&G ETU Upgrade kit Current batch comes with Tamiya connector unlike picture Our Upgrade Kit for G&G ETU enhances your trigger unit by adding several new options. Simply disconnect the stock electronic board and plug in our Upgrade Kit. The stock trigger unit is retained, so there is no need to open the gearbox. Possibility [...]

Airsoft Mosfets

Perun AB Airsoft Mosfet

£23.00

Perun AB Airsoft Mosfet Perun AB is a microcontroller-steered mosfet device with active brake and Li-Po protection which can be turned on or off. It is very rugged and powerful, yet compact. Microcontroller guarantees resistance to contact bouncing. Active brake (AB) prevents spring wear and double shots in semi mode in replicas with high rate [...]

£15.00

Perun Micro Airsoft Mosfet Perun MOSFET is the smallest MOSFET device on the market. Specialized, ultra-low resistance transistor used in Perun channels power from the battery directly to motor, while the mechanical contacts only have to handle small currents to turn MOSFET on and off. That greatly extends their service life and lowers overall resistance [...]

Out of stock
£75.00

Perun V3 Optical is a device that replaces mechanical contacts in version 3 gearboxes with an electronic circuit based on MOSFET transistors and adds a multitude of new functions to your replica. Elimination of mechanical contacts solves the problem of their gradual wear. MOSFET transistors utilized in Perun V3 Optical have a much lower resistance [...]

Perun was established in 2016 with the aim of designing and manufacturing MOSFET devices and other parts for AEGs. After years of designing and testing we offer you products that will work reliably even in most extreme situations and enhance the capabilities of your replicas.

All of our design work and most of manufacturing is done in the European Union state of Poland. That allows us to reach our main goal – keep the highest quality possible. We are in constant contact with players, airsoft techs, shops and consult with them to ensure, that our products satisfy their needs.