AirTac SSX23/303/TM MK23 Shotgun Shell HPA Adapter - Plug and Play

Introducing the MK23 M-Series adapters. We've fully printed the gas magazine for this adapter, maintaining high air volume, adding modularity, improving ease of assembly, and massively reducing weight.

We’ve replicated a MK23 magazine and adapted it to take HPA, fed by 30-round shotgun shells.

• Massively improved ergonomics and magazine catch feel (compared to our previous generation of MK23 shotgun shell adapters).
  
• High internal volume for good FPS/PSI.
  
• Compatible with all clone MK23 and Novritsch SSX23/303
• TM Feed lips may be required when using with a TM MK23

Two small grub screws are fitted to the adapter's mag catch area, you can loosen these to reduce the distance from adapter to nozzle, improving air-seal and FPS. If you want to get higher FPS, run a tighter barrel, a higher flow nozzle (SSX23/303 users), or a stronger hammer spring.

DO NOT EXCEED 150PSI WITH ANY AIRSOFT HPA ADAPTER.
ALWAYS USE AIR REGULATED BY A SECONDARY REGULATOR (EG AT200, WOLVERINE STORM, POLARSTAR MRS).
CHECK YOUR PSI BEFORE CONNECTING AIR TO A HPA ADAPTER.
NEVER CONNECT OUR EQUIPMENT TO PAINTBALL AIR TANKS OR CO2 TANKS.
NEVER CONNECT OUR EQUIPMENT TO A TIPPMAN STYLE HPA LINE