AirTac SSX23/303/TM MK23 Shotgun Shell HPA Adapter - Plug and Play

Introducing the MK23 M-Series adapters. We've fully printed the gas magazine for this adapter, maintaining high air volume, adding modularity, improving ease of assembly, and massively reducing weight. 

We’ve replicated a MK23 magazine and adapted it to take HPA, fed by 30-round shotgun shells. 

• Massively improved ergonomics and magazine catch feel (compared to our previous generation of MK23 shotgun shell adapters).
  
• High internal volume for good FPS/PSI.
  
• Compatible with all clone MK23 and Novritsch SSX23/303
• TM Feed lips may be required when using with a TM MK23

Two small grub screws are fitted to the adapter's mag catch area, you can loosen these to reduce the distance from adapter to nozzle, improving air-seal and FPS. If you want to get higher FPS, run a tighter barrel, a higher flow nozzle (SSX23/303 users), or a stronger hammer spring.

Two small grub screws are fitted to the adapter's mag catch area, you can loosen these to reduce the distance from the adapter to the nozzle, improving air seal and FPS. If you want to get higher FPS, run a tighter barrel, a higher flow nozzle (SSX23/303 users), or a stronger hammer spring.

DO NOT EXCEED 150PSI WITH ANY AIRSOFT HPA ADAPTER.
ALWAYS USE AIR REGULATED BY A SECONDARY REGULATOR (EG AT200, WOLVERINE STORM, POLARSTAR MRS).
CHECK YOUR PSI BEFORE CONNECTING AIR TO A HPA ADAPTER.
NEVER CONNECT OUR EQUIPMENT TO PAINTBALL AIR TANKS OR CO2 TANKS.
NEVER CONNECT OUR EQUIPMENT TO A TIPPMAN STYLE HPA LINE