Receivers & Outer Barrels

Showing 1–21 of 34 results

Showing 1–21 of 34 results

£5.00

Arthurian Airsoft Excalibur Bolt Release Button Replacement mock bolt release button for the Excalibur series M4 platform AEGs. Comes with a replacement grip pin and bolt release to lock and release the mock bolt mechanism.

£3.00

Arthurian Airsoft Excalibur M4 central body pin Replacement central lower receiver body pin to fit Excalibur M4 receivers. These pins fit the following Excalibur AR type models: Recon Glatisant Offspring Veteran Crusader Mark 18 Maul Sabre Bastion Knight Mordred These are compatible with other brands but may be slightly tighter or looser than the original.

£45.00

Replacement Excalibur Mordred front rail system with quick detach sling points. Compatible with most non-Tokyo Marui 416 style AEGs

£35.00

Replacement Sandstone lower receiver for the Arthurian Airsoft Excalibur Mordred 416 style airsoft AEG

£8.00

Replacement Excalibur Mordred, 416 and M4 mag release set including the button, spring, main stem and grub screw

£22.00

Arthurian Airsoft Excalibur Mordred outer barrel assembly Replacement outer barrel and mock gas tube assembly for the Excalibur Mordred 416 type AEG. This is a direct replacement outer barrel for the Arthurian Airsoft Excalibur Mordred. The kit includes the outer barrel, barrel nut, mock gas block, barrel shim and mock gas tube set. The outer [...]

£35.00

Arthurian Airsoft Excalibur Mordred upper receiver – Sandstone Replacement bronze colour upper receiver for the Arthurian Airsoft Excalibur Mordred complete with the charging handle mechanism, mock bolt plate, ejection port cover mechanism and mock forward assist button assembly. Mix up your Obsidian Mordred with a Sandstone receiver or build up a shorter or longer barreled [...]

£35.00

Arthurian Airsoft Excalibur Offspring Crimson upper receiver Replacement Offspring Crimson upper receiver complete with the red charging handle along with the whole assembly and the mock forward assist button assembly. Ideal for replacing the upper receiver on your Offspring Crimson whilst retaining the red details it’s known for on the market. This receiver should fit [...]

£20.00

D-Boys Steel Body Upper Cover for AK74 AEG Steel made Suitable for AK74 series Airsoft AEG.

£8.00

E&C Forward assist button set for M4 series AEG Replacement mock forward assist button set for E&C and other Marui based AEGs.

£12.00

Oper8 AR Enhanced Ultimate Dust Cover – Black A modernised, replacement dust cover for airsoft AEG M4 and AR platforms. It’s easy to install with minimal fuss. Simply remove your old dust cover and this one pivots in from one side to the other and will clip in firmly with the spring tensioned nub. It [...]

£12.00

Oper8 AR Enhanced Ultimate Dust Cover – Dark Earth A modernised, replacement dust cover for airsoft AEG M4 and AR platforms. It’s easy to install with minimal fuss. Simply remove your old dust cover and this one pivots in from one side to the other and will clip in firmly with the spring tensioned nub. [...]

£12.00

Oper8 M4 Dust Cover Don’t tread on me – Tan Fits M4 AEGS

SAVE

Receivers & Outer Barrels

SPEED Magazine Catch Button (Black)

£15.00 £10.20

The SPEED Magazine Catch Button eliminates the need to depress the button into the receiver in order to remove the magazine catch from the other side of the receiver. Without the SPEED Magazine Catch Button, you will always risk scratching up the receiver every time you need to remove the magazine catch. The SPEED Magazine [...]

SAVE

Receivers & Outer Barrels

SPEED Magazine Catch Button (Silver)

£15.00 £10.20

The SPEED Magazine Catch Button eliminates the need to depress the button into the receiver in order to remove the magazine catch from the other side of the receiver. Without the SPEED Magazine Catch Button, you will always risk scratching up the receiver every time you need to remove the magazine catch. The SPEED Magazine [...]

SAVE
£29.00 £21.60

The SPEED Airsoft 3-piece barrel spacer kit is engineered to improve barrel consistency for the VFC ASW338LM sniper rifle. The factory rifle uses three M3 screws to float the complete barrel system, which can move and shift under use. The SPEED Performance Barrel Spacer Kit is designed to give the maximum shot to shot consistency [...]

Out of stock
£10.00

Arthurian Airsoft Excalibur M4 receiver pin set Replacement front and rear body pins to fit Excalibur M4 receivers. These pins fit the following Excalibur AR type models: Recon Glatisant Offspring Veteran Crusader Mark 18 Maul Sabre Bastion Knight These are compatible with other brands but may be slightly tighter or looser than the original.

Out of stock
£13.00

Arthurian Airsoft Excalibur Offspring 6″ outer barrel Replacement Offspring 6″ outer barrel, suitable for most M4/AR AEG platforms on the market. An ideal length for any short CQB build. This outer barrel is taken straight from the Excalibur Offspring and is suitable for most freefloat rail systems out there. It features a standard 14mm CCW [...]

Out of stock
£2.50

Arthurian Airsoft Excalibur Offspring barrel shim set Replacement pair of outer barrel shims from the Arthurian Airsoft Excalibur Offspring series AEG. These barrel shims are both 30mm in diameter and 0.5mm thick.

Out of stock
£10.00

Arthurian Airsoft Excalibur Offspring mag release – Crimson Replacement magazine release catch and button set from the Excalibur Offspring in the Crimson red colour. These will fit most M4 or AR AEG models on the market.

Out of stock
£35.00

Arthurian Airsoft Excalibur Offspring Midnight upper receiver Replacement Offspring Midnight upper receiver complete with the charging handle assembly and the mock forward assist button assembly. Ideal for replacing the upper receiver on your Offspring Midnight. This receiver should fit most standard M4 AEGs on the market.

Custom Airsoft Gun Outer Barrels and Receivers

Customise the length and performance of your airsoft gun with a new outer barrel or receiver. Over time, your components will need to be replaced, so choose an airsoft outer barrel that is proven to last in the toughest environments. Many of our outer barrels and receivers are built from full metal components and are ruggedly reliable. A new airsoft outer barrel or receiver will improve your accuracy and fps, so your airsoft gun remains in tip top shape.

Discover our range of airsoft outer barrels and receivers below and improve your performance today.