Oper8 11.1v 2200MAH LiPo Block Battery
Oper8 11.1v 2200MAH LiPo Block Battery - Mini Tamiya is backordered and will ship as soon as it is back in stock.
Oper8 11.1v 2200mAh LiPo block (24 x 35 x 102mm). Big capacity for 11.1v-ready support guns, G&G Top Tech ECU rifles and Ares Amoebas.
Pickup available at Socom Tactical - Fleet
Usually ready in 2 hours
Interest Free Finance
Interest Free Finance
We accept Klarna and PayPal Pay-in-3.
Delivery and Shipping
Delivery and Shipping
Free shipping for all orders over £100.
Orders are shipped Monday, Wednesday, Thursday and Friday
Cut off time 14:00 all orders are send 1-2 days for UK Mainland
Oper8 11.1v 2200MAH LiPo Block Battery
Description
Description
This is the largest pack in the Oper8 11.1v range, made for guns that need both high voltage and a big tank to last the whole day.
It suits support guns that are rated or modified for 11.1v, along with G&G Top Tech models with the ECU fitted and the Ares Amoeba series, where it lets the electronics give their best performance.
At 24 x 35 x 102mm it needs a roomy block space, such as a large fixed stock or a support gun's battery box. If that's too big, the 11.1v 1500mAh block is much shorter. Charge it on a 3S balance charger such as the ToolkitRC UN3 balance charger.
Key specs
- Brand: Oper8 Power
- Type: LiPo block
- Voltage: 11.1v (3 cells)
- Capacity: 2200mAh
- Size: 24 x 35 x 102mm
- Connector: Deans or mini Tamiya (choose above)
Before you fit an 11.1v pack: make sure your gun is set up for it. A gearbox, motor or trigger contacts that aren't built for 11.1v can be damaged, so we can't accept responsibility for damage caused by using one in an unsuitable gun. A MOSFET is strongly recommended.
LiPo safety: always set your charger to 3S for this pack, and check the cell count before every charge.
You may also like
Frequently Asked Questions
Is my gun safe to use with 11.1v?
Is my gun safe to use with 11.1v?
Only if it's rated or upgraded for 11.1v. Unsuitable gearboxes, motors or trigger contacts can be damaged, so check first. A MOSFET is strongly recommended.
Which guns is it best for?
Which guns is it best for?
Support guns set up for 11.1v, G&G Top Tech rifles with the ECU, and the Ares Amoeba series.
What size is it?
What size is it?
24 x 35 x 102mm, so it needs a large block space.
