Need your RIF repaired? Check out our tech services!

X-Power

Fix leaks and upgrade durability with X-Power parts. Shop O-ring kits for GBB pistol magazine inlet valves, knocker valves and base plates for Hi-Capa and G-series magazines, a Tokyo Marui MWS trigger box spring set, and a CNC aluminium 16mm positive to 14mm negative thread adapter.

View as

Frequently Asked Questions

Need To know more?

Why Is My Gas Pistol Magazine Leaking?

Leaks are most often caused by worn, dry or damaged O-rings at the inlet valve, knocker valve or base plate. Replace the faulty O-ring and apply a little silicone oil to the seals.

Which X-Power O-Rings Fit My Magazine?

The inlet valve kit includes O-rings for KJ/VFC and TM/WE magazines, and base plate kits are available for Hi-Capa and G-series magazines. Check each listing for compatibility.

What Does the 16mm to 14mm Adapter Do?

It converts a 16mm positive thread to a 14mm negative (counter-clockwise) thread, so you can fit 14mm CCW suppressors, tracers and muzzle devices.

X-Power Airsoft Parts

X-Power makes affordable replacement parts that solve common problems, especially leaking gas magazines. Having a few spare O-rings in your kit bag can save a game day.

GBB pistol magazine O-rings

Gas magazine leaks are usually caused by worn or damaged O-rings. X-Power's inlet valve O-ring kit includes O-rings compatible with KJ/VFC and TM/WE magazines, plus air-sealed spacing rings. Base plate O-ring kits are available for Hi-Capa and G-series magazines, and anti-freeze knocker valve O-rings help keep your magazines sealing.

Tokyo Marui MWS trigger box springs

The X-Power trigger box spring set replaces the original springs in the Tokyo Marui MWS trigger box for improved durability.

Thread adapter

The 16mm positive to 14mm negative thread adapter is made from CNC aluminium, with a knurled finish for easy installation. It's ideal for fitting 14mm CCW suppressors and tracers.

Keeping Gas Magazines Sealed

Most gas magazine problems come down to a few rubber seals. Knowing where they are makes it much easier to diagnose a leak:

  • Inlet (fill) valve: if gas escapes when you fill the magazine, or the magazine won't hold a charge, the inlet valve O-ring is a common culprit.
  • Base plate: a slow leak from the bottom of the magazine often points to the base plate O-ring.
  • Knocker (output) valve: a hiss from the top of the magazine, or a loss of power while shooting, can indicate a worn knocker valve O-ring.

A quick test is to fill the magazine and listen, or submerge it briefly in water and look for bubbles. Once you've found the leak, replace the relevant O-ring with the correct size from the kit.

Maintenance tips

Many players keep a small amount of gas in their magazines when storing them, which helps the seals stay seated. A drop of silicone oil on the seals also helps keep them supple. Avoid petroleum-based lubricants, which can damage rubber seals. Keeping a spare O-ring kit in your bag means you can fix a leak on site rather than losing a magazine for the day.

Choosing the right kit

Check which magazine style you have before ordering: base plate kits are made for either Hi-Capa or G-series magazines, and the inlet valve kit covers KJ/VFC and TM/WE types. If you're not sure which you need, get in touch and we'll help.

Trigger box springs and thread adapters

The MWS spring set is a useful spare for anyone running a Tokyo Marui MWS, as springs can fatigue over time. The thread adapter is handy whenever your barrel thread doesn't match the suppressor or tracer you want to fit; check that your barrel has a 16mm positive (clockwise) thread before ordering.

Find more in our pistol spare parts, pistol magazines, Tokyo Marui MWS parts and silencers and suppressors.

Keep your magazines topped up with our airsoft gas and look after seals with grease and lubricants.