Airtac GHK M4 / G5 to MP5 HPA Adaptor - Non-Prebuilt
This adapter sits inside the GHK G5 mag-well, and protrudes only to reveal the CNC aluminium mag release paddle, and the US style HPA fitting. You must glue the feed lip pins in place
A donor mag is required for feed lips, exhaust valve and gas route. A CNC valve collar ensures lifelong air seal. Please see the product images for the correction feed lip version (note the position of the two side wings on the lips)
Pickup available at Socom Tactical - Fleet
Usually ready in 2 hours
Interest Free Finance
Interest Free Finance
We accept Klarna and PayPal Pay-in-3.
Delivery and Shipping
Delivery and Shipping
Free shipping for all orders over £100.
Orders are shipped Monday, Wednesday, Thursday and Friday
Cut off time 14:00 all orders are send 1-2 days for UK Mainland
Description
Description
This adapter sits inside the GHK G5 mag-well, and protrudes only to reveal the CNC aluminium mag release paddle, and the US style HPA fitting. You must glue the feed lip pins in place
A donor mag is required for feed lips, exhaust valve and gas route. A CNC valve collar ensures lifelong air seal. Please see the product images for the correction feed lip version (note the position of the two side wings on the lips)
Designed and tested with the CYMA MP5 Mid-Caps listed on our website.
Due to sacrificing volume for a low profile design, this adapter will only cycle a few rounds on full auto (some regs will fair better than others!), and is best suited to semi only gameplay, where you will not experience a single issue, and will cycle and feed perfectly! You can absolutely spam semi as fast as you can, all day long.
You will need a GHK valve key for home installation. Diagram to follow, though you’ll almost certainly figure it out on your own, the intelligent person you are ;)
Apologies for not providing the gas magazines for this adapter, but as I’m sure you all know, GHK G5 mags are somewhat hard to come by!
MP5 HPA Adapter Info
- Replaceable Feed Tube
- Compatible with all CYMA MP5 Mid Caps (65 round metal, 120/130 round metal, Straight, Novritsch Straight, Bullet Window).
- Straight Magazines will follow grip of pistol/SMG
- Small rear tabs can be filed down to accommodate out-of-spec magazines
- BB Retention drops only 2 BBs when changing magazine
- Magazine Insertion will be tight for first few insertions, this is to provide perfect fit
Frequently Asked Questions
Which magazines does it take?
Which magazines does it take?
It was designed and tested with CYMA MP5 mid-caps, including 65 round metal, 120/130 round metal, straight, Novritsch straight and bullet window versions.
What else do I need to install it?
What else do I need to install it?
You need a donor GHK mag for the feed lips, exhaust valve and gas route, plus a GHK valve key. The feed lip pins must be glued in place.
Can I use it on full auto?
Can I use it on full auto?
It will only cycle a few rounds on full auto and is best suited to semi-auto play, where it cycles and feeds reliably.



